Thermal-Hydraulic Performance of Solar Receiver Duct with Inclined Punched-Ribs and Grooves

[1]  B. Sarkar,et al.  Experimentally validated 3D simulation and performance optimization of a solar air duct with modified conical vortex generators , 2021, Solar Energy.

[2]  P. Promvonge,et al.  Thermal characteristics in solar air duct with V-shaped flapped-baffles and chamfered-grooves , 2021 .

[3]  M. Khoshvaght-Aliabadi,et al.  Experimental and numerical studies of air flow and heat transfer due to insertion of novel delta-winglet tapes in a heated channel , 2021 .

[4]  Peng Liu,et al.  A study on heat transfer enhancement for solar air heaters with ripple surface , 2021, Renewable Energy.

[5]  S. Hongkong,et al.  Experimental study and neural networks prediction on thermal performance assessment of grooved channel air heater , 2020 .

[6]  P. Promvonge,et al.  Enhanced heat transfer in rectangular duct with punched winglets , 2020 .

[7]  P. Promvonge,et al.  Heat transfer in solar receiver heat exchanger with combined punched-V-ribs and chamfer-V-grooves , 2019, International Journal of Heat and Mass Transfer.

[8]  P. Promvonge,et al.  Thermal behaviors in heat exchanger channel with V-shaped ribs and grooves , 2019, Chemical Engineering Research and Design.

[9]  Shiming Xu,et al.  Numerical investigation of heat transfer enhancement in a solar air heater roughened by multiple V-shaped ribs , 2019, Renewable Energy.

[10]  Nantiwat Pholdee,et al.  Optimal U-shaped baffle square-duct heat exchanger through surrogate-assisted self-adaptive differential evolution with neighbourhood search and weighted exploitation-exploration , 2017 .

[11]  Jun Li,et al.  Flow and heat transfer characteristics in rectangular channels using combination of convex-dimples with grooves , 2017 .

[12]  D. Jin,et al.  Numerical investigation of heat transfer and fluid flow in a solar air heater duct with multi V-shaped ribs on the absorber plate , 2015 .

[13]  K. Sopian,et al.  Enhancement heat transfer characteristics in the channel with Trapezoidal rib-groove using nanofluids , 2015 .

[14]  P. Promvonge,et al.  Effects of rib size and arrangement on forced convective heat transfer in a solar air heater channel , 2015 .

[15]  Pongjet Promvonge,et al.  Heat transfer behaviors in a solar air heater channel with multiple V-baffle vortex generators , 2014 .

[16]  Varun,et al.  Correlations for solar air heater duct with dimpled shape roughness elements on absorber plate , 2012 .

[17]  P. Promvonge,et al.  Heat transfer in square duct fitted diagonally with angle-finned tape—Part 1: Experimental study , 2012 .

[18]  Pongjet Promvonge,et al.  Numerical prediction on laminar heat transfer in square duct with 30° angled baffle on one wall , 2010 .

[19]  Pongjet Promvonge,et al.  Thermal characterization of turbulent flow in a channel with isosceles triangular ribs , 2009 .

[20]  Pongjet Promvonge,et al.  Numerical study on heat transfer of turbulent channel flow over periodic grooves , 2008 .

[21]  S. C. Solanki,et al.  Heat transfer and friction characteristics for artificially roughened ducts with compound turbulators , 2007 .

[22]  A. R. Jaurker,et al.  Heat transfer and friction characteristics of rectangular solar air heater duct using rib-grooved artificial roughness , 2006 .

[23]  Pei-Xue Jiang,et al.  Experimental and numerical investigation of convection heat transfer in a rectangular channel with angled ribs , 2006 .

[24]  Mehrdad Raisee,et al.  Flow and heat transfer in straight cooling passages with inclined ribs on opposite walls: an experimental and computational study , 2003 .

[25]  S. C. Solanki,et al.  Thermo-hydraulic performance of solar air heaters having integral chamfered rib roughness on absorber plates , 2001 .

[26]  S. C. Solanki,et al.  Heat and fluid flow in rectangular solar air heater ducts having transverse rib roughness on absorber plates , 1993 .

[27]  P. R. Kanna,et al.  Enhancement of heat transfer in SAH with polygonal and trapezoidal shape of the rib using CFD , 2021 .

[28]  S. Chamoli,et al.  Thermal performance improvement of a solar air heater fitted with winglet vortex generators , 2018 .

[29]  S.,et al.  PERFORMANCE IMPROVEMENT OF SOLAR AIR HEATER WITH V-BAFFLES ON ABSORBER PLATE , 2018 .

[30]  G. Jiang,et al.  Parameters study and analysis of turbulent flow and heat transfer enhancement in narrow channel with discrete grooved structures , 2015 .

[31]  Gongnan Xie,et al.  Numerical modeling flow and heat transfer in dimpled cooling channels with secondary hemispherical protrusions , 2015 .

[32]  Pongjet Promvonge,et al.  Thermal performance of turbulent flow in a solar air heater channel with rib-groove turbulators , 2014 .