Application of Lean Six Sigma methodology in the registration process of a hospital

Purpose – The purpose of this paper is to study the scope of Lean Six Sigma (LSS) strategy and to explore its successful deployment in the Indian healthcare sector. Design/methodology/approach – The research reported in this paper is based on a case study carried out using the LSS DMAIC (Define-Measure-Analyze-Control) approach and its application in improving the registration process in the Health Information Department (HID) of a Medical College hospital in India. Findings – The study describes improvements in the HID through the power of LSS. Cycle time of the process was reduced from three to 1.5 minutes and the SD was reduced to 21.2 from 61 seconds. The project has shown a 94 per cent reduction in patients’ average waiting time. The study also reported a 91 per cent reduction in queue length and 48 per cent reduction in percentage of scheduled utilization of staff for the process. Research limitations/implications – The paper is based on a single case study executed in a hospital and hence there is ...

[1]  Douglas C. Montgomery,et al.  Introduction to Statistical Quality Control , 1986 .

[2]  Fred Patton.  Does Six Sigma work in service industries , 2006 .

[3]  Zbigniew J. Pasek,et al.  Simulation-based verification of lean improvement for emergency room process , 2008, 2008 Winter Simulation Conference.

[4]  Jiju Antony,et al.  Critical success factors for the effective implementation of Lean Sigma , 2012 .

[5]  Antonio Costa,et al.  Linking Six Sigma to simulation: a new roadmap to improve the quality of patient care. , 2012, International journal of health care quality assurance.

[6]  B. Smith.  Lean and six sigma: A one-two punch , 2003 .

[7]  Marcello Braglia,et al.  A new value stream mapping approach for complex production systems , 2006 .

[8]  J. Antony,et al.  LEAN AND SIX SIGMA METHODOLOGIES IN NHS SCOTLAND: AN EMPIRICAL STUDY AND DIRECTIONS FOR FUTURE RESEARCH , 2012 .

[9]  Nathan Rosenberg,et al.  Inside the black box , 1983 .

[10]  Qianmei Feng,et al.  Under the knife: a national survey of six sigma programs in US healthcare organizations. , 2008, International journal of health care quality assurance.

[11]  Jiju Antony,et al.  Reducing employees' turnover in transactional services: a Lean Six Sigma case study , 2010 .

[12]  Michael J. Seifert.  The use of discrete event simulation in a design for Six Sigma project , 2005, Proceedings of the Winter Simulation Conference, 2005..

[13]  Jiju Antony,et al.  Six Sigma vs Lean: Some perspectives from leading academics and practitioners , 2011 .

[14]  Basem El‐Haik,et al.  Simulation-based lean six-sigma and design for six-sigma , 2006 .

[15]  John P. S. Verver,et al.  Lean Six Sigma in Healthcare , 2006, Journal for healthcare quality : official publication of the National Association for Healthcare Quality.

[16]  P. Hines,et al.  Learning to evolve: A review of contemporary lean thinking , 2004 .

[17]  Etienne Grandjean,et al.  Ergonomics in computerized offices , 1986 .

[18]  Christopher S Kim,et al.  Lean health care: what can hospitals learn from a world-class automaker? , 2006, Journal of hospital medicine.

[19]  Chao-Ton Su,et al.  Improving service quality by capitalising on an integrated Lean Six Sigma methodology , 2006 .

[20]  Jiju Antony,et al.  Reducing patient waiting time in a pathology department using the Six Sigma methodology , 2013 .

[21]  Celine McKeown,et al.  Office Ergonomics: Practical Applications , 2007 .

[22]  David M. Ferrin,et al.  Lean Sigma and simulation, so what's the correlation? V2 , 2005, Proceedings of the Winter Simulation Conference, 2005..

[23]  Jiju Antony,et al.  Application of six sigma methodology to reduce defects of a grinding process , 2011, Qual. Reliab. Eng. Int..

[24]  Krishnaswami Srihari,et al.  Using simulation with Design For Six Sigma in a server manufacturing environment , 2008, 2008 Winter Simulation Conference.

[25]  Jiju Antony,et al.  Reducing Patient Waiting Time in Outpatient Department Using Lean Six Sigma Methodology , 2014, Qual. Reliab. Eng. Int..

[26]  Jay Arthur.  Lean Six Sigma for Hospitals: Simple Steps to Fast, Affordable, and Flawless Healthcare , 2011 .

[27]  Sheldon Howard Jacobson,et al.  Application of discrete-event simulation in health care clinics: A survey , 1999, J. Oper. Res. Soc..

[28]  Lawrence I. Goldman,et al.  Simulation and optimization as effective DFSS tools , 2005, Proceedings of the Winter Simulation Conference, 2005..

[29]  J. Vest,et al.  A critical review of the research literature on Six Sigma, Lean and StuderGroup's Hardwiring Excellence in the United States: the need to demonstrate and communicate the effectiveness of transformation strategies in healthcare , 2009, Implementation science : IS.

[30]  Jiju Antony,et al.  Lean six sigma in a call centre : a case study , 2010 .

[31]  Linda R. LaGanga.  Lean service operations: Reflections and new directions for capacity expansion in outpatient clinics , 2011 .

[32]  Kai Yang,et al.  Hospital registration waiting time reduction through process redesign , 2008 .

[33]  E. V. Gijo,et al.  Six Sigma implementation – Hurdles and more hurdles , 2005 .

[34]  Michael L. George,et al.  Lean Six Sigma for Service : How to Use Lean Speed and Six Sigma Quality to Improve Services and Transactions , 2003 .

[35]  Douglas C. Montgomery,et al.  Applied Statistics and Probability for Engineers, Third edition , 1994 .

[36]  Peter Enderwick,et al.  The competitive challenge of emerging markets: the case of medical tourism , 2011 .

[37]  J. Antony.  Six Sigma vs TQM: some perspectives from leading practitioners and academics , 2009 .

[38]  David M. Ferrin,et al.  The application of simulation methodology in a hospital's Six Sigma project , 2005, Proceedings of the Winter Simulation Conference, 2005..

[39]  Douglas P. Mader,et al.  Lean Six Sigma's Evolution , 2008 .

[40]  V. Cruz Machado,et al.  Lean tools and lean transformation process in health care , 2010 .