A volumetric geometry and topology parameterisation for fluids-based optimisation

[1]  A. Bourgougnon.  Comptes Rendus de l'Académie des Sciences. , 1879 .

[2]  A. Busemann,et al.  Aerodynamic lift at supersonic speeds , 1935 .

[3]  J. B. Rosen.  The Gradient Projection Method for Nonlinear Programming. Part I. Linear Constraints , 1960 .

[4]  S. A. Coons.  SURFACES FOR COMPUTER-AIDED DESIGN OF SPACE FORMS , 1967 .

[5]  D. Shepard.  A two-dimensional interpolation function for irregularly-spaced data , 1968, ACM National Conference.

[6]  Yi-Kuen Lee,et al.  Helmholtz resonance of harbours , 1975, Journal of Fluid Mechanics.

[7]  P. Woodward,et al.  SLIC (Simple Line Interface Calculation) , 1976 .

[8]  Raymond M. Hicks,et al.  Wing design by numerical optimization , 1977 .

[9]  C. W. Hirt,et al.  Volume of fluid (VOF) method for the dynamics of free boundaries , 1981 .

[10]  M. Imam.  Three‐dimensional shape optimization , 1982 .

[11]  Ashok Dhondu Belegundu,et al.  A Study of Mathematical Programming Methods for Structural Optimization , 1985 .

[12]  V. Braibant,et al.  Shape optimal design using B-splines , 1984 .

[13]  Kyung K. Choi,et al.  Accuracy of Finite Element Based Shape Design Sensitivity Analysis , 1985 .

[14]  J. Arora,et al.  A study of mathematical programmingmethods for structural optimization. Part II: Numerical results , 1985 .

[15]  R. Gallagher,et al.  Sensitivity analysis in shape optimization of continuum structures , 1985 .

[16]  Thomas W. Sederberg,et al.  Free-form deformation of solid geometric models , 1986, SIGGRAPH.

[17]  J. Sethian,et al.  Fronts propagating with curvature-dependent speed: algorithms based on Hamilton-Jacobi formulations , 1988 .

[18]  William E. Lorensen,et al.  Marching cubes: A high resolution 3D surface construction algorithm , 1987, SIGGRAPH.

[19]  S. Osher,et al.  Algorithms Based on Hamilton-Jacobi Formulations , 1988 .

[20]  M. Bendsøe.  Optimal shape design as a material distribution problem , 1989 .

[21]  S. N. Kramer,et al.  An Augmented Lagrange Multiplier Based Method for Mixed Integer Discrete Continuous Optimization and Its Applications to Mechanical Design , 1994 .

[22]  J. Monaghan.  Simulating Free Surface Flows with SPH , 1994 .

[23]  Jie Li,et al.  Calcul d'Interface Affine par Morceaux , 1995 .

[24]  D Huebner Lawrence,et al.  Experimental Results on the Feasibility of an Aerospike for Hypersonic Missiles , 1995 .

[25]  M. J. Rimlinger,et al.  Constrained Multipoint Aerodynamic Shape Optimization Using an Adjoint Formulation and Parallel Computers , 1997 .

[26]  A. Jameson,et al.  Optimum Aerodynamic Design Using the Navier–Stokes Equations , 1997 .

[27]  M. J. Rimlinger,et al.  Constrained Multipoint Aerodynamic Shape Optimization Using an Adjoint Formulation and Parallel Computers , 1997 .

[28]  M. Bendsøe,et al.  Material interpolation schemes in topology optimization , 1999 .

[29]  H. Sobieczky.  Parametric Airfoils and Wings , 1999 .

[30]  J. Sethian,et al.  Structural Boundary Design via Level Set and Immersed Interface Methods , 2000 .

[31]  Ozden Turan,et al.  A STANDING-WAVE-TYPE SLOSHING ABSORBER TO CONTROL TRANSIENT OSCILLATIONS , 2000 .

[32]  Jamshid A. Samareh,et al.  MULTIDISCIPLINARY AERODYNAMIC-STRUCTURAL SHAPE OPTIMIZATION USING DEFORMATION (MASSOUD) , 2000 .

[33]  Akira Oyama,et al.  Real-coded adaptive range genetic algorithm applied to transonic wing optimization , 2000, Appl. Soft Comput..

[34]  Tang Zhi,et al.  Control theory based airfoil design using Euler equations , 2001 .

[35]  G. Farin.  Curves and Surfaces for Cagd: A Practical Guide , 2001 .

[36]  G. Allaire,et al.  A level-set method for shape optimization , 2002 .

[37]  J. Petersson,et al.  Topology optimization of fluids in Stokes flow , 2003 .

[38]  Xiaoming Wang,et al.  A level set method for structural topology optimization , 2003 .

[39]  G. Allaire,et al.  Structural optimization using sensitivity analysis and a level-set method , 2004 .

[40]  M. Burger,et al.  Incorporating topological derivatives into level set methods , 2004 .

[41]  O. Pironneau,et al.  SHAPE OPTIMIZATION IN FLUID MECHANICS , 2004 .

[42]  I. Nikolos,et al.  Exploring Freeform Deformation Capabilities in Aerodynamic Shape Parameterization , 2005, EUROCON 2005 - The International Conference on "Computer as a Tool".

[43]  John E. Bussoletti,et al.  "Fundamental" Parameteric Geometry Representations for Aircraft Component Shapes , 2006 .

[44]  Patrice Castonguay,et al.  Effect of Shape Parameterization on Aerodynamic Shape Optimization , 2007 .

[45]  Patrice Castonguay,et al.  SURVEY OF SHAPE PARAMETERIZATION TECHNIQUES AND ITS EFFECT ON THREE-DIMENSIONAL AERODYNAMIC SHAPE OPTIMIZATION , 2007 .

[46]  K. Maute,et al.  Topology optimization of flow domains using the lattice Boltzmann method , 2007 .

[47]  Christian B Allen,et al.  CFD‐based optimization of aerofoils using radial basis functions for domain element parameterization and mesh deformation , 2008 .

[48]  Antony Jameson,et al.  Continuous Adjoint Method for Unstructured Grids , 2008 .

[49]  Robert A. Dalrymple,et al.  Modeling Dam Break Behavior over a Wet Bed by a SPH Technique , 2008 .

[50]  Bijan Mohammadi,et al.  Optimal shape design of defense structures for minimizing short wave impact , 2008 .

[51]  William A. Crossley,et al.  A Parametric Approach to Supercritical Airfoil Design Optimization , 2009 .

[52]  M. Wang,et al.  Piecewise constant level set method for structural topology optimization , 2009 .

[53]  Wataru Yamazaki,et al.  Geometry Parameterization and Computational Mesh Deformation by Physics-Based Direct Manipulation Approaches , 2010 .

[54]  Kevin A. Lane,et al.  Inverse Airfoil Design Utilizing CST Parameterization , 2010 .

[55]  Singiresu S. Rao.  Engineering Optimization : Theory and Practice , 2010 .

[56]  Y. Utsumi.  MULTIDISCIPLINARY DESIGN OPTIMIZATION OF A THREE-DIMENSIONAL SUPERSONIC BIPLANE BASED ON METHOD OF CHARACTERISTICS , 2010 .

[57]  K. Maute,et al.  An explicit level set approach for generalized shape optimization of fluids with the lattice Boltzmann method , 2011 .

[59]  K. Maute,et al.  Levelset based fluid topology optimization using the extended finite element method , 2012 .

[60]  Kenneth I. Joy,et al.  Cubic Gradient-Based Material Interfaces , 2013, IEEE Transactions on Visualization and Computer Graphics.

[61]  András Sóbester,et al.  Design space dimensionality reduction through physics-based geometry re-parameterization , 2013 .

[62]  Gudrun Thäter,et al.  Adjoint-based fluid flow control and optimisation with lattice Boltzmann methods , 2013, Comput. Math. Appl..

[63]  Piotr Breitkopf,et al.  Towards a space reduction approach for efficient structural shape optimization , 2013 .

[64]  Daniel J Poole,et al.  Aerofoil Design Variable Extraction for Aerodynamic Optimisation , 2013 .

[65]  Kurt Maute,et al.  Level-set methods for structural topology optimization: a review , 2013 .

[66]  Daniel J Poole,et al.  A Constrained Global Optimization Framework , 2014 .

[67]  Takayuki Yamada,et al.  Topology optimization using the lattice Boltzmann method incorporating level set boundary expressions , 2014, J. Comput. Phys..

[68]  Ramana V. Grandhi,et al.  A survey of structural and multidisciplinary continuum topology optimization: post 2000 , 2014 .

[69]  Daniel J Poole,et al.  Application of Control Point-Based Aerodynamic Shape Optimization to Two-Dimensional Drag Minimization , 2014 .

[70]  G. Steven,et al.  Topology and shape optimization methods using evolutionary algorithms: a review , 2015 .

[71]  M. Diez,et al.  Design-space dimensionality reduction in shape optimization by Karhunen–Loève expansion , 2015 .

[72]  C. Allen,et al.  Metric-Based Mathematical Derivation of Efficient Airfoil Design Variables , 2015 .

[73]  Daniel J Poole,et al.  Review of Aerofoil Parameterisation Methods for Aerodynamic Shape Optimisation , 2015 .

[74]  Jim W Hall,et al.  A multi-physics computational model of fuel sloshing effects on aeroelastic behaviour , 2015 .

[75]  C. Allen,et al.  A Geometric Comparison of Aerofoil Shape Parameterisation Methods , 2016 .

[76]  Andrea Serani,et al.  Design-space dimensionality reduction for single-and multi-disciplinary shape optimization , 2016 .

[77]  Daniel J Poole,et al.  A generic framework for handling constraints with agent-based optimization algorithms and application to aerodynamic design , 2017 .

[78]  A. Chambolle,et al.  Design-dependent loads in topology optimization , 2003 .