Hg0.8Cd0.2Te grown by liquid phase epitaxy using Cd0.94Zn0.06Te buffer layer

Abstract Buffered structures of Hg 0.8 Cd 0.2 Te/Cd 0.94 Zn 0.06 Te/Cd 0.97 Zn 0.03 Te were grown by a slider LPE technique and their material properties were compared with those of Hg 0.8 Cd 0.2 Te/Cd 0.97 Zn 0.03 Te structures which have no buffer layer. Photoluminescence spectroscopy (PL) was used to determine the compositions of the buffer layers and the substrates and analyse the impurities in the buffer layers. Auger electron spectroscopy (AES) was used to analyse impurities. Either sodium or lithium related donor-acceptor pair (DAP) peaks were observed in the substrate, but not in the Cd 0.94 Zn 0.06 Te buffer layer. AES analysis revealed that the substrate contained some impurities such as Si, Al, O, K, Fe, and Mg. In the Cd 0.94 Zn 0.06 Te buffer layer, the above impurities were not detected. The distribution of dislocations in the epi-layers were analysed by defect etching as well as double crystal X-ray diffraction. For the buffered structure, most misfit etch-pits were located just above the interface between the Hg 0.8 Cd 0.2 Te and Cd 0.94 Zn 0.06 Te buffer, and their density was much lower than that in the unbuffered structure, in which etch-pits were distributed rather broadly in the epi-layer. Electrical properties of the Hg 0.8 Cd 0.2 Te epi-layers, which were Hg-annealed at 250°C, were analysed by Hall measurement at 77 K. The buffered structure showed the carrier concentrations of 7 × 10 13 to 1 × 10 14 cm -3 and Hall mobilities of 2 to 5 × 10 5 cm 2 /V · s.

[1]  P. M. Raccah,et al.  Optoelectronic properties of Cd1−xZnxTe films grown by molecular beam epitaxy on GaAs substrates , 1985 .

[2]  S. Takeuchi,et al.  Observation of dislocations in cadmium telluride by cathodoluminescence microscopy , 1979 .

[3]  W. J. Choyke,et al.  A photoluminescence comparison of CdTe thin films grown by molecular‐beam epitaxy, metalorganic chemical vapor deposition, and sputtering in ultrahigh vacuum , 1988 .

[4]  D. Blanks,et al.  Photoluminescence of CdTe: A comparison of bulk and epitaxial material , 1985 .

[5]  C. Fontaine,et al.  Luminescence characterization of residual impurities in CdTe grown by molecular beam epitaxy , 1985 .

[6]  E. Weiss,et al.  Growth, annealing, and characterization of HgZnTe liquid phase epitaxy layers , 1990 .

[7]  E. Molva,et al.  Acceptor states in CdTe and comparison with ZnTe. General trends , 1984 .

[8]  G. Blackmore,et al.  The sources and behaviour of impurities in LPE-grown (Cd,Hg)Te layers on CdTe(111) substrates , 1988 .

[9]  C. Johnson,et al.  An evaluation of analytical techniques related to cadmium telluride purity and processing , 1990 .

[10]  J. F. Schetzina,et al.  Properties of CdZnTe crystals grown by a high pressure Bridgman method , 1992 .

[11]  Jan J. Dubowski,et al.  Photoluminescence of gallium impurity in cadmium telluride , 1989 .

[12]  G. Destefanis,et al.  Evidence of anomalous behavior in low‐n‐type mercury cadmium telluride induced by extended defects , 1989 .

[13]  G. Blackmore,et al.  Improved control of composition and electrical properties of liquid phase epitaxial (CdHg)Te layers , 1992 .

[14]  P. Fewster,et al.  Crystallographic polarity and chemical etching of CdxHg1−xTe , 1981 .

[15]  J. M. Kim,et al.  Slider liquid phase epitaxial growth of Hg0.8Cd0.2Te, Hg0.7Cd0.3Te and Hg0.3Cd0.7 Te with precise control of alloy compositions , 1992 .

[16]  J. Bajaj,et al.  Photoluminescence spectroscopy of excitons for evaluation of high-quality CdTe crystals , 1988 .

[17]  T. Boeck,et al.  Origin and evolution of background impurity content of materials used in the preparation of (Hg, Cd) Te LPE layers on CdTe substrates , 1992 .