Performance evaluation of forced convection mixed-mode solar dryer: Experimental investigation

In present experimental investigation, a modest attempt is made to study the influence of load density and size of food product on drying efficiency of solar dryer. In order to achieve this objective, the laboratory model of mixed-mode solar dryer is fabricated and tested under indoor simulated conditions. Experiments have been performed on dryer with cylindrical potato samples of different thicknesses (5, 8 10 and 18 mm) and loading density (1.08, 2.16, 3.24 and 4.33 kg/m2 of food sample tray area) under forced air circulation. The air mass flow through dryer system is kept constant at 0.011 kg/s (1.3 m/s). Experimental variation of food product moisture content with drying time data have been plotted and analyzed for a wide range of product size and loading density. Results of experimental investigation reveal that the load density and food product size have significant effect on drying efficiency. It is also found that load density has an increasing influence on efficiency whereas the opposite trend is observed for food product size. Sensitivity analysis results indicate that both the variables are equally sensitive to overall efficiency of the dryer.

[1]  B. K. Bala,et al.  Thin layer solar drying of rough rice , 1989 .

[2]  A. Mahapatra,et al.  Role of solar agricultural-drying in developing countries , 1990 .

[3]  P. C. Pande,et al.  Design and development of a solar dryer cum water heater , 1991 .

[4]  I. Dincer,et al.  Investigation of the thermal efficiencies of a solar dryer , 1995 .

[5]  Ibrahim Dincer,et al.  Experiments on a new small-scale solar dryer , 1996 .

[6]  O. V. Ekechukwua,et al.  Review of solar-energy drying systems II : an overview of solar drying technology , 1998 .

[7]  A. El-sebaii,et al.  Experimental investigation of an indirect type natural convection solar dryer , 2002 .

[8]  Shailesh Kumar,et al.  A comprehensive procedure for performance evaluation of solar food dryers , 2002 .

[9]  A. Farhat,et al.  Validation of a pepper drying model in a polyethylene tunnel greenhouse , 2004 .

[10]  T. C. Kandpal,et al.  Solar drying vs. open sun drying: A framework for financial evaluation , 2006 .

[11]  Sukhmeet Singh,et al.  Multi-shelf domestic solar dryer , 2006 .

[12]  Subodh Kumar,et al.  INFLUENCE OF SAMPLE SIZE AND SHAPE ON TRANSPORT PARAMETERS DURING DRYING OF SHRINKING BODIES , 2007 .

[13]  I. Badran,et al.  Modeling and experimental studies on a domestic solar dryer , 2009 .

[14]  P. P. Tripathy,et al.  Influence of Sample Geometry and Rehydration Temperature on Quality Attributes of Potato Dried Under Open Sun and Mixed-Mode Solar Drying , 2009 .

[15]  A. A. Gatea.  Design and construction of a solar drying system, a cylindrical section and analysis of the performance of the thermal drying system , 2011 .