High strength and high ductility nano-Ni-Al2O3/A356 composites fabricated with nickel-plating and equal channel angle semi-solid extrusion (ECASE)
暂无分享,去创建一个
X. Zuo | Yun Zhou | Tan Wang | Jihua Tian | Songjiang Ran
[1] A. Fatemi,et al. Fatigue Design with High Pressure Die Cast Aluminum Including the Effects of Defects, Section Size, Stress Gradient, and Mean Stress , 2020 .
[2] Pengfei Sun,et al. Characterization of Ni coating layer of Al2O3 particles and their wettability behavior in Al2O3@Ni/Al-10Si composites , 2020 .
[3] I. Kaymaz,et al. Investigating the Optimum Model Parameters for Casting Process of A356 Alloy: A Cross-validation Using Response Surface Method and Particle Swarm Optimization , 2020, Arabian Journal for Science and Engineering.
[4] W. Ding,et al. Effect of rare earth Y and Al–Ti–B master alloy on the microstructure and mechanical properties of 6063 aluminum alloy , 2020 .
[5] Qiang Li,et al. Nanoparticulate dispersion, microstructure refinement and strengthening mechanisms in Ni-coated SiCp/Al-Cu nanocomposites , 2019, Materials Science and Engineering: A.
[6] D. Brabazon,et al. Semi-solid stirring of modified ceramic nanoparticles using iron and nickel in an aluminum A356 melt , 2019, Materials Research Express.
[7] D. Brabazon,et al. Study on the incorporation of ceramic nanoparticles into the semi-solid A356 melt , 2019, Materials Chemistry and Physics.
[8] R. Srivastava,et al. Influence of Fine Al2O3 and Aluminium Nano-Particles on the 6061 Aluminium Alloy near the Grain Boundary of the Semi-Solid Cast Microstructure , 2019, Transactions of the Indian Ceramic Society.
[9] J. Schoenung,et al. Influence of grain boundaries with dispersed nanoscale Al2O3 particles on the strength of Al for a wide range of homologous temperatures , 2019, Journal of Alloys and Compounds.
[10] D. Brabazon,et al. Fabrication of A356-based rolled composites reinforced by Ni–P-coated bimodal ceramic particles , 2018 .
[11] X. Zuo,et al. Microstructure and thermal decomposition property of Ni-P/Cr 2 N composite powder by electroless plating , 2018, Advanced Powder Technology.
[12] S. Pourhosseini,et al. Effect of metal coating of reinforcements on the microstructure and mechanical properties of Al-Al2O3 nanocomposites , 2018 .
[13] Zhi-qiang Yu,et al. Effect of the interfacial reaction of aluminum and yttrium oxide on aging behavior of aluminum–magnesium–silicon alloy reinforced with yttrium oxide modified sub-micron alumina , 2015 .
[14] K. Shirvanimoghaddam,et al. Tensile and fracture behavior of nano/micro TiB2 particle reinforced casting A356 aluminum alloy composites , 2015 .
[15] Saeed Maleksaeedi,et al. Effects of nano-Al2O3 particle addition on grain structure evolution and mechanical behaviour of friction-stir-processed Al , 2014 .
[16] Yizhong Huang,et al. Investigation of microstructure and mechanical properties of Al6061-nanocomposite fabricated by stir casting , 2014 .
[17] S. A. Kori,et al. Preparation of 6061Al-Al2O3 MMC's by Stir Casting and Evaluation of Mechanical and Wear Properties , 2014 .
[18] H. Baharvandi,et al. Nano-sized aluminum oxide reinforced commercial casting A356 alloy matrix: Evaluation of hardness, wear resistance and compressive strength focusing on particle distribution in aluminum matrix , 2013 .
[19] C. Suryanarayana,et al. Mechanically alloyed nanocomposites , 2013 .
[20] H. Ezatpour,et al. Microstructure and mechanical properties of extruded Al/Al2O3 composites fabricated by stir-casting process , 2013 .
[21] H. Baharvandi,et al. Fabrication and study on mechanical properties and fracture behavior of nanometric Al2O3 particle-reinforced A356 composites focusing on the parameters of vortex method , 2013 .
[22] A. Tofigh,et al. Effect of nano-size Al2O3 reinforcement on the mechanical behavior of synthesis 7075 aluminum alloy composites by mechanical alloying , 2013 .
[23] A. Hassani,et al. High strain rate superplasticity in a nano-structured Al-Mg/SiCP composite severely deformed by equal channel angular extrusion , 2012 .
[24] K. Tang,et al. Wetting of pure aluminium on graphite, SiC and Al2O3 in aluminium filtration , 2012 .
[25] V. Senthilkumar,et al. Experimental investigation on newly developed ultrafine-grained aluminium based nano-composites with improved mechanical properties , 2012 .
[26] S. Sajjadi,et al. Comparison of microstructure and mechanical properties of A356 aluminum alloy/Al2O3 composites fabricated by stir and compo-casting processes , 2012 .
[27] H. Ezatpour,et al. Fabrication of A356 composite reinforced with micro and nano Al2O3 particles by a developed compocasting method and study of its properties , 2012 .
[28] P. Rohatgi,et al. Microstructure and hardness of Al2O3 nanoparticle reinforced Al–Mg composites fabricated by reactive wetting and stir mixing , 2011 .
[29] H. Ezatpour,et al. Microstructure and mechanical properties of Al-Al2O3 micro and nano composites fabricated by stir casting , 2011 .
[30] M. R. Toroghinejad,et al. Effect of particle size on microstructure and mechanical properties of composites produced by ARB process , 2011 .
[31] R. Bauri,et al. Processing, microstructure and mechanical properties of nickel particles embedded aluminium matrix composite , 2011 .
[32] G. Lu,et al. Microstructural evolution of equal channel angular pressed AZ91D magnesium alloy during partial remelting , 2010 .
[33] M. R. Toroghinejad,et al. Manufacturing of high-strength aluminum/alumina composite by accumulative roll bonding , 2010 .
[34] Hossein Abdizadeh,et al. Development of high-performance A356/nano-Al2O3 composites , 2009 .
[35] H. Atkinson,et al. Microstructural Coarsening of Semi-Solid Aluminium Alloys , 2008 .
[36] E. Aifantis,et al. Stress-driven migration of grain boundaries and fracture processes in nanocrystalline ceramics and metals , 2008 .
[37] Reza Ghomashchi,et al. The implication of rheology in semi-solid metal processes: An overview , 2007 .
[38] M. Kok,et al. Production and mechanical properties of Al2O3 particle-reinforced 2024 aluminium alloy composites , 2005 .
[39] Xiaochun Li,et al. Study on bulk aluminum matrix nano-composite fabricated by ultrasonic dispersion of nano-sized SiC particles in molten aluminum alloy , 2004 .
[40] Sumsun Naher,et al. Simulation of the stir casting process , 2003 .
[41] H. Atkinson,et al. Microstructural evolution and tensile mechanical properties of thixoformed high performance aluminium alloys , 2003 .
[42] R. Drew,et al. The influence of nickel coating on the wettability of aluminum on ceramics , 2002 .
[43] M. Gu,et al. Interfacial reaction between the oxidized SiC particles and Al-Mg alloys , 2001 .
[44] Robin A. L. Drew,et al. Preparation of nickel-coated powders as precursors to reinforce MMCs , 2000 .
[45] G. Éskin. Cavitation mechanism of ultrasonic melt degassing , 1995 .