Current and voltage transfer function filters using a single active device

In this study, current and voltage transfer function filters using single active component, namely, current backward transconductance amplifier (CBTA) are presented. The proposed structures are a single-input three outputs (SITO) current-transfer function filter, a single-input four-output (SIFO) voltage transfer function filter and three-input single-output (TISO) voltage transfer function filter. The proposed filters have low active and passive sensitivities and use canonical number of electronics components. The validity of the proposed circuits is demonstrated by PSPICE simulations and experimental results. Operation range of the CBTA and its parasitic effects are also discussed.

[1]  Chun-Ming Chang,et al.  Voltage-mode universal biquadratic filters with one input and five outputs using MOCCIIs , 2005, Comput. Electr. Eng..

[2]  Christofer Toumazou,et al.  Analogue IC design : the current-mode approach , 1993 .

[3]  Muhammet Köksal,et al.  Floating Immittance Function Simulator and Its Applications , 2009, Circuits Syst. Signal Process..

[4]  N. A. Shah,et al.  Three input and one output voltage-mode universal filter , 2003 .

[5]  Hakan Kuntman,et al.  Multi-input single-output filter with reduced number of passive elements employing single current conveyor , 2003, Comput. Electr. Eng..

[6]  D. C. Wadsworth.  Accurate current conveyor integrated circuit , 1989 .

[7]  Muhammad Taher Abuelma'atti.  Universal current-mode filter using single four-terminal floating nullor , 2000 .

[8]  Shahram Minaei,et al.  A Modified CFOA and Its Applications to Simulated Inductors, Capacitance Multipliers, and Analog Filters , 2008, IEEE Transactions on Circuits and Systems I: Regular Papers.

[9]  Khanittha Kaewdang,et al.  On the realization of electronically current-tunable CMOS OTA , 2007 .

[10]  Hakan Kuntman,et al.  Single DDCC Biquads with High Input Impedance and Minimum Number of Passive Elements , 2005 .

[11]  Nisar A. Shah,et al.  Versatile voltage-mode CFA-based universal filter , 2005 .

[12]  A. U. Keskin.  Voltage-mode high-Q band-pass filters and oscillators employing single CDBA and minimum number of components , 2005 .

[13]  Raj Senani,et al.  Multifunction CM/VM Biquads Realized with a Single CFOA and Grounded Capacitors , 2003 .

[14]  Mehmet Sagbas,et al.  Electronically tunable current-mode second-order universal filter using minimum elements , 2004 .

[15]  Chun-Ming Chang,et al.  Current-mode and voltage-mode universal biquads using a single current-feedback amplifier , 1999 .

[16]  M. Sagbas,et al.  Voltage-mode three-input single-output multifunction filters employing minimum number of components , 2007 .

[17]  Mohmad Amin Malik,et al.  High impedance voltage- and current-mode multifunction filters , 2005 .

[18]  Jiun-Wei Horng.  High input impedance voltage-mode universal biquadratic filters with three inputs using plus-type CCIIs , 2004 .