Effect of filler additions on pilot-scale extrusion coating of paperboard with PLA-based blends

Abstract We study the incorporation of minerals (talc, kaolin and surface-treated calcium carbonate) in paperboard coatings based on PLA to improve their performance, often limited by the low crystallinity and moderate gas barrier of the polymer. Masterbatches of PLA-based blends mixed with the mineral fillers were melt-blended in a twin-screw extruder and applied as a coating on paperboard in a pilot-scale unit operating at velocities up to 140 m/min. Thermal imaging was used during the extrusion coating and the effect of the fillers was investigated as far as processability and their effect on the mechanical performance. A reduction of neck-in and improved adhesion between the coating and the substrate were achieved at intermediate mineral loadings. Excess filler and low coating weight generated pinholes, leading to a reduction of the integrity and mechanical properties of the coatings. Overall, we define the performance window for continuous, pilot-scale coating of paperboard with a biopolyester filled with mineral particles, opening the opportunity to realize operations in industrial settings.

[1]  O. Rojas,et al.  Effects of talc, kaolin and calcium carbonate as fillers in biopolymer packaging materials , 2021, Journal of Polymer Engineering.

[2]  O. Rojas,et al.  Talc reinforcement of polylactide and biodegradable polyester blends via injection‐molding and pilot‐scale film extrusion , 2021, Journal of Applied Polymer Science.

[3]  S. Ghosh,et al.  Studies on Semi-crystalline Poly Lactic Acid (PLA) as a Hydrophobic Coating Material on Kraft Paper for Imparting Barrier Properties in Coated Abrasive Applications , 2020 .

[4]  A. Lazzeri,et al.  Sustainable Micro and Nano Additives for Controlling the Migration of a Biobased Plasticizer from PLA-Based Flexible Films , 2020, Polymers.

[5]  H. Choo,et al.  Talc filled polylactic-acid biobased polymer composites: tensile, thermal and morphological properties , 2020 .

[6]  P. Cinelli,et al.  Rigid filler toughening in PLA-Calcium Carbonate composites: Effect of particle surface treatment and matrix plasticization , 2019, European Polymer Journal.

[7]  M. Toivakka,et al.  Continuous Processing of Nanocellulose and Polylactic Acid into Multilayer Barrier Coatings , 2019, ACS applied materials & interfaces.

[8]  D. Puglia,et al.  Enhancement of paperboard performance as packaging material by layering with plasticized polyhydroxybutyrate/nanocellulose coatings , 2018, Journal of Applied Polymer Science.

[9]  C. Duchesne,et al.  Characterization of PLA-talc films using NIR chemical imaging and Multivariate Image Analysis techniques , 2018, Polymer Testing.

[10]  D. B. Rocha,et al.  A new approach for flexible PBAT/PLA/CaCO3films into agriculture , 2018, Journal of Applied Polymer Science.

[11]  J. Kuusipalo,et al.  Blends of linear and peroxide‐modified branched polylactide for extrusion coating , 2018 .

[12]  E. Piorkowska,et al.  The influence of matrix crystallinity, filler grain size and modification on properties of PLA/calcium carbonate composites , 2017 .

[13]  Surendra Singh Gaur,et al.  Reactive Extrusion of Polylactic Acid/Cellulose Nanocrystal Films for Food Packaging Applications: Influence of Filler Type on Thermomechanical, Rheological, and Barrier Properties , 2017 .

[14]  C. Duchesne,et al.  Effect of annealing on gas permeability and mechanical properties of polylactic acid/talc composite films , 2017 .

[15]  D. Aht-Ong,et al.  Isothermal crystallization behaviors and kinetics of nucleated polylactide/poly(butylene adipate-co-terephthalate) blend films with talc , 2016, Journal of Thermal Analysis and Calorimetry.

[16]  G. Stoclet,et al.  Influence of the Filler Nature on the Crystalline Structure of Polylactide-Based Nanocomposites: New Insights into the Nucleating Effect , 2016 .

[17]  N. Petchwattana,et al.  Thermal and mechanical properties of bioplastic poly(lactic acid) compounded with silicone rubber and talc , 2016 .

[18]  Sami Kotkamo,et al.  Synthesis and Characterization of Linear and Tri-Block PLLA–PEG–PLLA Blends , 2016 .

[19]  R. Fajgar,et al.  Effect of the talc filler on structural, water vapor barrier and mechanical properties of poly(lactic acid) composites , 2016 .

[20]  Pieter Samyn,et al.  Bio-Based Coatings for Paper Applications , 2015 .

[21]  J. González‐Benito,et al.  Effect of kaolin nanofiller and processing conditions on the structure, morphology, and biofilm development of polylactic acid , 2015 .

[22]  A. Addad,et al.  Comparison of the influence of talc and kaolinite as inorganic fillers on morphology, structure and thermomechanical properties of polylactide based composites , 2015 .

[23]  Hsiu-Yu Cheng,et al.  Modification and extrusion coating of polylactic acid films , 2015 .

[24]  Hongtao Wang,et al.  Heteroaggregation of engineered nanoparticles and kaolin clays in aqueous environments. , 2015, Water research.

[25]  Cai-xia Zhao,et al.  Crystallization behavior and morphology of poly(lactic acid) with a novel nucleating agent , 2015 .

[26]  Mingshu Yang,et al.  Effects of Inorganic Fillers on the Thermal and Mechanical Properties of Poly(lactic acid). , 2014, International journal of polymer science.

[27]  Long Jiang,et al.  PLA/sepiolite and PLA/calcium carbonate nanocomposites: A comparison study , 2013 .

[28]  L. Castillo,et al.  Thermoplastic starch films reinforced with talc nanoparticles. , 2013, Carbohydrate polymers.

[29]  Xiuli Zhao,et al.  Effects of talc on the mechanical and thermal properties of polylactide , 2012 .

[30]  D. Cameron,et al.  Adhesion of extrusion-coated polymer sealing layers to a fiber-based packaging material with an atomic layer deposited aluminum oxide surface coating , 2012 .

[31]  M. Misra,et al.  Thermal, Mechanical and Rheological Behavior of Poly(lactic acid)/Talc Composites , 2012, Journal of Polymers and the Environment.

[32]  L. Avérous,et al.  Effect of crystallization on barrier properties of formulated polylactide , 2012 .

[33]  J. Kuusipalo,et al.  Utilisation of continuous atomic layer deposition process for barrier enhancement of extrusion-coated paper , 2011 .

[34]  K. Bahranowski,et al.  Synthesis of polylactide/clay composites using structurally different kaolinites and kaolinite nanotubes , 2011 .

[35]  O. Park,et al.  Extrusion coating performances of iPP/LDPE blends , 2009 .

[36]  C. Andersson.  New ways to enhance the functionality of paperboard by surface treatment – a review , 2008 .

[37]  P. Dubois,et al.  Novel High-Performance Talc/Poly[(butylene adipate)-co-terephthalate] Hybrid Materials , 2008 .

[38]  B. Morris.  Understanding Why Adhesion in Extrusion Coating Decreases With Diminishing Coating Thickness , 2008 .

[39]  K. Akrida-Demertzi,et al.  A study on the migration of organic pollutants from recycled paperboard packaging materials to solid food matrices , 2007 .

[40]  K. Bremmell,et al.  The influence of polymer structure and morphology on talc wettability. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[41]  A. Karlsson,et al.  Characteristics of pigment-filled polymer coatings on paperboard , 2005 .

[42]  M. Hedenqvist,et al.  A study on montmorillonite/polyethylene nanocomposite extrusion‐coated paperboard , 2005 .

[43]  Z. Ishak,et al.  Comparison of the mechanical properties and interfacial interactions between talc, kaolin, and calcium carbonate filled polypropylene composites , 2004 .

[44]  M. Osman,et al.  INFLUENCE OF EXCESSIVE FILLER COATING ON THE TENSILE PROPERTIES OF LDPE-CALCIUM CARBONATE COMPOSITES , 2004 .

[45]  J. Karger‐Kocsis,et al.  The effect of organoclay on the mechanical properties and morphology of injection‐molded polyamide 6/polypropylene nanocomposites , 2004 .

[46]  I. Chung,et al.  Effect of aspect ratio of clay on melt extensional process of maleated polyethylene/clay nanocomposites , 2001 .

[47]  Hiroshi Murano,et al.  Packaging Technology for the , 1992 .