Factors affecting the performance of microbial fuel cells for sulfur pollutants removal.

A microbial fuel cell (MFC) has been developed for removal of sulfur-based pollutants and can be used for simultaneous wastewater treatment and electricity generation. This fuel cell uses an activated carbon cloth+carbon fibre veil composite anode, air-breathing dual cathodes and the sulfate-reducing species Desulfovibrio desulfuricans. 1.16gdm(-3) sulfite and 0.97gdm(-3) thiosulfate were removed from the wastewater at 22 degrees C, representing sulfite and thiosulfate removal conversions of 91% and 86%, respectively. The anode potential was controlled by the concentration of sulfide in the compartment. The performance of the cathode assembly was affected by the concentration of protons in the cation-exchanging ionomer with which the electrocatalyst is co-bound at the three-phase (air, catalyst and support) boundary.

[1]  J. Almeida,et al.  Effect of hydrogen sulfide on growth of sulfate reducing bacteria , 1992, Biotechnology and bioengineering.

[2]  U von Stockar,et al.  Physiologic studies with the sulfate-reducing bacterium Desulfovibrio desulfuricans: evaluation for use in a biofuel cell. , 1996, Enzyme and microbial technology.

[3]  Piet N.L. Lens,et al.  Environmental Technologies to Treat Sulphur Pollution: Principles and Engineering , 2000 .

[4]  Robert C T Slade,et al.  Steady-state dc and impedance investigations of H2/O2 alkaline membrane fuel cells with commercial Pt/C, Ag/C, and Au/C cathodes. , 2006, The journal of physical chemistry. B.

[5]  Ying Liu,et al.  Electrochemical and bioelectrochemistry properties of room-temperature ionic liquids and carbon composite materials. , 2004, Analytical chemistry.

[6]  Hong Liu,et al.  Electricity generation using an air-cathode single chamber microbial fuel cell in the presence and absence of a proton exchange membrane. , 2004, Environmental science & technology.

[7]  F. Harnisch,et al.  The suitability of monopolar and bipolar ion exchange membranes as separators for biological fuel cells. , 2008, Environmental science & technology.

[8]  H. Cypionka,et al.  Oxidation of H2, organic compounds and inorganic sulfur compounds coupled to reduction of O2 or nitrate by sulfate-reducing bacteria , 1992, Archives of Microbiology.

[9]  Brenda Little,et al.  Diversifying biological fuel cell designs by use of nanoporous filters. , 2007, Environmental science & technology.

[10]  F. Harnisch,et al.  Challenges and constraints of using oxygen cathodes in microbial fuel cells. , 2006, Environmental science & technology.

[11]  E. Barrett,et al.  (CONTRIBUTION FROM THE MULTIPLE FELLOWSHIP OF BAUGH AND SONS COMPANY, MELLOX INSTITUTE) The Determination of Pore Volume and Area Distributions in Porous Substances. I. Computations from Nitrogen Isotherms , 1951 .

[12]  Hong Liu,et al.  Power densities using different cathode catalysts (Pt and CoTMPP) and polymer binders (nafion and PTFE) in single chamber microbial fuel cells. , 2006, Environmental science & technology.

[13]  S. Dong,et al.  Conductive property of multiwall carbon nanotubes-PEO-salt nanocomposite film , 2004 .

[14]  S Venkata Mohan,et al.  Biochemical evaluation of bioelectricity production process from anaerobic wastewater treatment in a single chambered microbial fuel cell (MFC) employing glass wool membrane. , 2008, Biosensors & bioelectronics.

[15]  René A Rozendal,et al.  A bipolar membrane combined with ferric iron reduction as an efficient cathode system in microbial fuel cells. , 2006, Environmental science & technology.

[16]  C. Avignone-Rossa,et al.  Activated carbon cloth as anode for sulfate removal in a microbial fuel cell. , 2008, Environmental science & technology.

[17]  Malou M-Louise Haine,et al.  De Wilde V. , 1986 .

[18]  T. Hansen.  Bergey's Manual of Systematic Bacteriology , 2005 .

[19]  Uwe Schröder,et al.  Application of pyrolysed iron(II) phthalocyanine and CoTMPP based oxygen reduction catalysts as cathode materials in microbial fuel cells , 2005 .

[20]  Hong Liu,et al.  Enhanced Coulombic efficiency and power density of air-cathode microbial fuel cells with an improved cell configuration , 2007 .

[21]  W. Verstraete,et al.  Biofuel Cells Select for Microbial Consortia That Self-Mediate Electron Transfer , 2004, Applied and Environmental Microbiology.

[22]  Sang-Eun Oh,et al.  Power generation using different cation, anion, and ultrafiltration membranes in microbial fuel cells. , 2007, Environmental science & technology.

[23]  G. Gil,et al.  Operational parameters affecting the performannce of a mediator-less microbial fuel cell. , 2003, Biosensors & bioelectronics.

[24]  W. Habermann,et al.  Biological fuel cells with sulphide storage capacity , 1991, Applied Microbiology and Biotechnology.

[25]  Chris Melhuish,et al.  Energy accumulation and improved performance in microbial fuel cells , 2005 .

[26]  E. Teller,et al.  ADSORPTION OF GASES IN MULTIMOLECULAR LAYERS , 1938 .

[27]  Willy Verstraete,et al.  The anode potential regulates bacterial activity in microbial fuel cells , 2008, Applied Microbiology and Biotechnology.