Elastic-plastic finite element analysis of metal matrix plates with edge notches

Abstract A two-dimensional finite element program has been developed for elastic-plastic analysis. Isoparametric quadrilateral element with four nodes is used and Lagrange polynomial has been chosen as interpolation function. In the finite element solution, an initial stress method (modified Newton-Raphson method) is used. Residual stresses have been shown in figures and the spread of plastic zones has been illustrated for steel-aluminum composite plates with edge notches.

[1]  David R. Owen,et al.  Anisotropic elasto-plastic finite element analysis of thick and thin plates and shells , 1983 .

[2]  P. C. Chou,et al.  The Yield Criterion of Laminated Media , 1973 .

[3]  D. Sikarskie,et al.  Stress analysis in plane orthotropic material by the boundary element method , 1988 .

[4]  M. D. Olson,et al.  Finite element analysis of fibrous composite structures: A plasticity approach , 1992 .

[5]  G. J. Vaughn,et al.  Stress Concentration Factors in Shouldered Shafts Subjected to Combinations of Flexure and Torsion , 1968 .

[6]  N. J. Hoff Stress Concentrations in Cylindrically Orthotropic Composite Plates With a Circular Hole , 1981 .

[7]  Theo de Jong,et al.  Stresses around Rectangular Holes in Orthotropic Plates , 1981 .

[8]  Stephen W. Tsai,et al.  A General Theory of Strength for Anisotropic Materials , 1971 .

[9]  Thomas H. Hyde,et al.  Stress concentration factors due to axial loading of axisymmetric external projections on hollow tubes , 1987 .

[10]  O. C. Zienkiewicz,et al.  Elasto‐plastic solutions of engineering problems ‘initial stress’, finite element approach , 1969 .

[11]  S. Utku,et al.  Finite element analysis of elastic-plastic fibrous composite structures , 1981 .

[12]  Stephen W. Tsai,et al.  Anisotropic strength of composites , 1965 .

[13]  A Kato Design equation for stress concentration factors of notched strips and grooved shafts , 1992 .

[14]  O. Sayman,et al.  Elasto-plastic finite element analysis of orthotropic rotating discs with holes , 1994 .