Mechanical properties and failure mechanism of 3D needle-punched C /SiC–Al composites

[1]  Zhaofeng Chen,et al.  High compression performance of C /SiC-Al composites fabricated by CVI and vacuum pressure infiltration , 2021 .

[2]  Zhaofeng Chen,et al.  Compressive strength and damage mechanisms of 3D needle-punched C /SiC–Al composites , 2021 .

[3]  Di Zhang,et al.  Effect of Al2O3 coating thickness on microstructural characterization and mechanical properties of continuous carbon fiber reinforced aluminum matrix composites , 2020 .

[4]  J. J. Sha,et al.  Synergistic strengthening of aluminum matrix composites reinforced by SiC nanoparticles and carbon fibers , 2020 .

[5]  D. Fang,et al.  Tensile properties of two-dimensional carbon fiber reinforced silicon carbide composites at temperatures up to 2300 °C , 2020 .

[6]  Sarabjit Singh,et al.  A comparative study of tensile strength of Cf/SiC composites having single layer and multilayer interphases , 2019 .

[7]  Yang Wang,et al.  Microstructure and mechanical properties of C /SiC–Al composites fabricated by PIP and vacuum pressure infiltration processes , 2019, Journal of Alloys and Compounds.

[8]  Yazheng Yang,et al.  Tensile properties of two-dimensional carbon fiber reinforced silicon carbide composites at temperatures up to 1800 °C in air , 2019, Extreme Mechanics Letters.

[9]  D. Han,et al.  Compressive strength and damage mechanisms of 2D-C/SiC composites at high temperatures , 2018, Ceramics International.

[10]  W. Zhou,et al.  Microstructure and properties of plain-weave carbon fabric reinforced ceramic composites containing Cu-Si alloy , 2018, Composites Part B: Engineering.

[11]  M. Balooch,et al.  Micro-mechanical evaluation of SiC-SiC composite interphase properties and debond mechanisms , 2017 .

[12]  Haifeng Cheng,et al.  Processing-temperature dependent micro- and macro-mechanical properties of SiC fiber reinforced SiC matrix composites , 2017 .

[13]  Min Liu,et al.  Oxidation and thermal shock resistant properties of Al-modified environmental barrier coating on SiCf/SiC composites , 2017 .

[14]  Lai-fei Cheng,et al.  Enhanced densification and mechanical properties of carbon fiber reinforced silicon carbide matrix composites via laser machining aided chemical vapor infiltration , 2017 .

[15]  H. Zhong,et al.  Properties and microstructure evolution of Cf/SiC composites fabricated by polymer impregnation and pyrolysis (PIP) with liquid polycarbosilane , 2017 .

[16]  Bozhe Wang,et al.  Tensile behavior of 2D-C/SiC composites at elevated temperatures: Experiment and modeling , 2017 .

[17]  Wen-ming Guo,et al.  Microstructure and properties of 2D-Cf/SiC composite fabricated by combination of CVI and PIP process with SiC particle as inert fillers , 2017 .

[18]  Lai-fei Cheng,et al.  Effect of heat treatment on the mechanical properties of SiCf/BN/SiC fabricated by CVI , 2016 .

[19]  Jun Liang,et al.  Experimental study of high-temperature tensile mechanical properties of 3D needled C/C–SiC composites , 2016 .

[20]  Shichao Liu,et al.  Fabrication of woven carbon fibers reinforced Al–Mg (95–5 wt%) matrix composites by an electromagnetic casting process , 2015 .

[21]  Lai-fei Cheng,et al.  The improvement in the mechanical and thermal properties of SiC/SiC composites by introducing CNTs into the PyC interface , 2015 .

[22]  T. Suo,et al.  The dynamic tensile properties of 2D-C/SiC composites at elevated temperatures , 2015 .

[23]  L. Qi,et al.  Effect of fiber orientation on mechanical properties of 2D-Cf/Al composites by liquid–solid extrusion following Vacuum infiltration technique , 2015 .

[24]  T. Zeng,et al.  Compressive behavior of C/SiC composite sandwich structure with stitched lattice core , 2015 .

[25]  Dian‐sen Li,et al.  High temperature compression properties and failure mechanism of 3D needle-punched carbon/carbon composites , 2015 .

[26]  Xin-gui Zhou,et al.  High-performance 3D SiC/PyC/SiC composites fabricated by an optimized PIP process with a new precursor and a thermal molding method , 2014 .

[27]  Lai-fei Cheng,et al.  High-temperature flexural properties of SiBC modified C/SiC composites , 2014 .

[28]  Lai-fei Cheng,et al.  Increasing the strength and toughness of a carbon fiber/silicon carbide composite by heat treatment , 2013 .

[29]  S. Dong,et al.  Microstructure observation and analysis of 3D carbon fiber reinforced SiC-based composites fabricated through filler enhanced polymer infiltration and pyrolysis , 2012 .

[30]  A. Mirhabibi,et al.  The effect of applied pressure on fracture surface and tensile properties of nickel coated continuous carbon fiber reinforced aluminum composites fabricated by squeeze casting , 2010 .