Electronic module assembly

[1]  Jörg Franke,et al.  High-precision assembly of electronic devices with lightweight robots through sensor-guided insertion , 2021 .

[2]  Yufeng Wu,et al.  Metal recovery from waste printed circuit boards: A review for current status and perspectives , 2020, Resources, Conservation and Recycling.

[3]  B. Li,et al.  Fabrication and transmission of optical polymer waveguide backplane for high - performance computers. , 2020, Optics express.

[4]  Klaus Ritz.  Handbuch der Leiterplattentechnik , 2020 .

[5]  Samir Lamouri,et al.  Machine learning applied in production planning and control: a state-of-the-art in the era of industry 4.0 , 2020, Journal of Intelligent Manufacturing.

[6]  Stefan Härter.  Qualifizierung des Montageprozesses hochminiaturisierter elektronischer Bauelemente , 2020 .

[7]  Beth Keser,et al.  Advances in Embedded and Fan‐Out Wafer‐Level Packaging Technologies , 2020 .

[8]  Subramanian S. Iyer,et al.  Goodbye, motherboard. Bare chiplets bonded to silicon will make computers smaller and more powerful: Hello, silicon-interconnect fabric , 2019, IEEE Spectrum.

[9]  J. Franke,et al.  Characterization of Alternative Sinter Materials for Power Electronics , 2019, 2019 22nd European Microelectronics and Packaging Conference & Exhibition (EMPC).

[10]  Michael Pecht,et al.  Life cycle trends of electronic materials, processes and components , 2019 .

[11]  Maxime Argoud,et al.  Active Interposer Technology for Chiplet-Based Advanced 3D System Architectures , 2019, 2019 IEEE 69th Electronic Components and Technology Conference (ECTC).

[12]  Daniel Schall,et al.  Process traceability in distributed manufacturing using blockchains , 2019, SAC.

[13]  J. Franke,et al.  Programming and Evaluation of a Multi-Axis/Multi-Process Manufacturing System for Mechatronic Integrated Devices , 2019, 2019 International Conference on Electronics Packaging (ICEP).

[14]  Yong‐Cheol Jeong,et al.  High speed nozzle jet printing for bendable organic light emitting diodes , 2019, Flexible and Printed Electronics.

[15]  R. Viswanath,et al.  On‐Package Heterogeneous System Integration , 2019, Materials Science and Technology.

[16]  Jonas Sjoberg,et al.  Impact Of Stencil Quality & Technolgy On Solder Paste Printing Performance , 2019, 2019 Pan Pacific Microelectronics Symposium (Pan Pacific).

[17]  M. F. Proença,et al.  Advanced electrically conductive adhesives for high complexity PCB assembly , 2019 .

[18]  Lihui Wang,et al.  Digital twin-based WEEE recycling, recovery and remanufacturing in the background of Industry 4.0 , 2018, Int. J. Prod. Res..

[19]  Maximilian Metzner,et al.  Machine Learning in Production – Potentials, Challenges and Exemplary Applications , 2019, Procedia CIRP.

[20]  M. Strassburg,et al.  Review—Visible LEDs: More than Efficient Light , 2019 .

[21]  Gunther Reinhart,et al.  An automated packaging planning approach using machine learning , 2019 .

[22]  Satish T. S. Bukkapatnam,et al.  Machine learning and AI for long-term fault prognosis in complex manufacturing systems , 2019, CIRP Annals.

[23]  Jörg Franke,et al.  Blockchain Enabled Traceability – Securing Process Quality in Manufacturing Chains in the Age of Autonomous Driving , 2018, 2018 IEEE International Conference on Technology Management, Operations and Decisions (ICTMOD).

[24]  Hannu Tenhunen,et al.  Smart Electronic Systems , 2018 .

[25]  Chun-Chi Chiu,et al.  Tiny Passive Chip 008004 and 5μm HD SMT Process Development (IMPACT 2018) , 2018, 2018 13th International Microsystems, Packaging, Assembly and Circuits Technology Conference (IMPACT).

[26]  Gordon Elger,et al.  Evaluation of silver and copper sintering of first level interconnects for high power LEDs , 2018, 2018 7th Electronic System-Integration Technology Conference (ESTC).

[27]  Joerg Franke,et al.  Generation of 3D Functional Structures for High- Frequency Applications by Printing Technologies , 2018, 2018 13th International Congress Molded Interconnect Devices (MID).

[28]  SivaChandra Jangam,et al.  Electrical Characterization of High Performance Fine Pitch Interconnects in Silicon-Interconnect Fabric , 2018, 2018 IEEE 68th Electronic Components and Technology Conference (ECTC).

[29]  W. Schmitt,et al.  Micro-Silver Sinter Paste Developed for Pressure Sintering on Bare Cu Surfaces under Air or Inert Atmosphere , 2018, 2018 IEEE 68th Electronic Components and Technology Conference (ECTC).

[30]  R. Aschenbrenner,et al.  Panel Level Packaging - A View Along the Process Chain , 2018, 2018 IEEE 68th Electronic Components and Technology Conference (ECTC).

[31]  M. Z. Abdullah,et al.  Investigation on nano-reinforced solder paste after reflow soldering part 1: Effects of nano-reinforced solder paste on melting, hardness, spreading rate, and wetting quality , 2018, Microelectron. Reliab..

[32]  Ravinder Dahiya,et al.  Ultra-thin chips for high-performance flexible electronics , 2018, npj Flexible Electronics.

[33]  Bingheng Lu,et al.  Additive manufacturing frontier: 3D printing electronics , 2018 .

[34]  F. Giannazzo,et al.  Emerging trends in wide band gap semiconductors (SiC and GaN) technology for power devices , 2018 .

[35]  Yi Li,et al.  Nano-conductive Adhesives , 2018 .

[36]  T. Zohdi.  Modeling and Simulation of Functionalized Materials for Additive Manufacturing and 3D Printing: Continuous and Discrete Media , 2018 .

[37]  A. M. Najib,et al.  Experimental Study of Self-Alignment during Reflow Soldering Process , 2018 .

[38]  Zhiyi Zhang,et al.  Direct writing of inkjet-printed short channel organic thin film transistors , 2017 .

[39]  Alexander Hensel,et al.  Investigations of copper wire bonding capability on plasma based additive copper metallizations , 2017, 2017 IEEE 19th Electronics Packaging Technology Conference (EPTC).

[40]  M. Mueller,et al.  Feasability study of piezo jet printed silver ink structures for interconnection and condition monitoring of power electronics components , 2017, 2017 IEEE 19th Electronics Packaging Technology Conference (EPTC).

[41]  Wipo.  World Intellectual Property Indicators, 2017 edition , 2017 .

[42]  Xi Vincent Wang,et al.  A cloud-based production system for information and service integration: an internet of things case study on waste electronics , 2017, Enterp. Inf. Syst..

[43]  C. Brabec,et al.  Printed semi-transparent large area organic photovoltaic modules with power conversion efficiencies of close to 5 % , 2017 .

[44]  Saptadeep Pal,et al.  Heterogeneous Integration at Fine Pitch (≤ 10 µm) Using Thermal Compression Bonding , 2017, 2017 IEEE 67th Electronic Components and Technology Conference (ECTC).

[45]  S. Qu,et al.  Low-cost two-layer terahertz transmitarray , 2017, 2017 International Applied Computational Electromagnetics Society Symposium (ACES).

[46]  Chen Yan,et al.  Open source cell library Mono3D to develop large-scale monolithic 3D integrated circuits , 2017, 2017 IEEE International Symposium on Circuits and Systems (ISCAS).

[47]  Wei Sun,et al.  The Boom in 3D-Printed Sensor Technology , 2017, Sensors.

[48]  Puneet Gupta,et al.  Latency, Bandwidth and Power Benefits of the SuperCHIPS Integration Scheme , 2017, 2017 IEEE 67th Electronic Components and Technology Conference (ECTC).

[49]  Jie Fu,et al.  Chip Shooter to Enable Fine Pitch Flip Chip , 2017, 2017 IEEE 67th Electronic Components and Technology Conference (ECTC).

[50]  Werner Götz,et al.  Progress in LED technology for solid-state lighting , 2017, OPTO.

[51]  J. Franke,et al.  Additive metallization of injection molded ceramic components by a plasma-coating process , 2017, 2017 Pan Pacific Microelectronics Symposium (Pan Pacific).

[52]  Greg Smith,et al.  Impact of Stencil Foil Type on Solder Paste Transfer Efficiency for Laser Cut SMT Stencils , 2017 .

[53]  Sang Won Yoon,et al.  Stencil Printing Optimization using a Hybrid of Support Vector Regression and Mixed-integer Linear Programming , 2017 .

[54]  Hwan-Sik Yoon,et al.  A Review on Electromechanical Devices Fabricated by Additive Manufacturing , 2017 .

[55]  Jens Niemann,et al.  Challenges of the Miniaturization in the Electronics Production on the example of 01005 Components , 2017 .

[56]  Ching-Cherng Sun,et al.  Handbook of Advanced Lighting Technology , 2017 .

[57]  Christoph J. Brabec,et al.  Inkjet printed silver nanowire percolation networks as electrodes for highly efficient semitransparent organic solar cells , 2016 .

[58]  Muammer Kaya,et al.  Recovery of metals and nonmetals from electronic waste by physical and chemical recycling processes. , 2016, Waste management.

[59]  Mohammed Ouzzif,et al.  An overview of traceability: Definitions and techniques , 2016, 2016 4th IEEE International Colloquium on Information Science and Technology (CiSt).

[60]  Ruobing Yu,et al.  Cyanate ester resin modified by phenolic resin containing diphenyl oxide segments with high molecular weight , 2016, Iranian Polymer Journal.

[61]  R. Mahajan,et al.  Embedded Multi-die Interconnect Bridge (EMIB) -- A High Density, High Bandwidth Packaging Interconnect , 2016, 2016 IEEE 66th Electronic Components and Technology Conference (ECTC).

[62]  Mika Liukkonen,et al.  Toward decentralized intelligence in manufacturing: recent trends in automatic identification of things , 2016 .

[63]  Donald Lupo,et al.  Organic and Printed Electronics : Fundamentals and Applications , 2016 .

[64]  Subramanian S. Iyer,et al.  Heterogeneous Integration for Performance and Scaling , 2016, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[65]  J. Franke,et al.  THE EFFECT OF AREA SHAPE AND AREA RATIO ON SOLDER PASTE PRINTING PERFORMANCE , 2016 .

[66]  Greeley,et al.  An Investigation into the Use of Nano ‐ Coated Stencils to Improve Solder Paste Printing with Small Stencil Aperture Area Ratios , 2016 .

[67]  Volker Zöllmer,et al.  International Conference on System-integrated Intelligence : New Challenges for Product and Production Engineering , SysInt 2016 Customized Smartness : A Survey on links between Additive Manufacturing and Sensor Integration , 2016 .

[68]  Jörg Franke,et al.  A novel engineering process for spatial opto-mechatronic applications , 2016 .

[69]  Lihui Wang,et al.  A Semantic Information Services Framework for Sustainable WEEE Management Toward Cloud-Based Remanufacturing , 2015, Sustainable Manufacturing and Remanufacturing Management.

[70]  Joerg Franke,et al.  An Exergy-Based Analysis of Temperature Profiles for an Over-Pressure Reflow Oven Technology , 2015 .

[71]  J. Franke,et al.  Energy Efficiency Analysis of Vapor Phase Soldering Technology through Exergy-Based Metric , 2015 .

[72]  H. Wenzel,et al.  Tracking the Flow of Resources in Electronic Waste - The Case of End-of-Life Computer Hard Disk Drives. , 2015, Environmental science & technology.

[73]  T. S. Srivatsan,et al.  Additive Manufacturing : Innovations, Advances, and Applications , 2015 .

[74]  R. Johnson,et al.  Pressureless Sintering of Microscale Silver Paste for 300 °C Applications , 2015, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[75]  John Hallam,et al.  An architecture for efficient reuse in flexible production scenarios , 2015, 2015 IEEE International Conference on Automation Science and Engineering (CASE).

[76]  D. Gu,et al.  Laser Additive Manufacturing of High-Performance Materials , 2015 .

[77]  Domenic Forte,et al.  An RFID-based technology for electronic component and system Counterfeit detection and Traceability , 2015, 2015 IEEE International Symposium on Technologies for Homeland Security (HST).

[78]  J. Lewis,et al.  Device fabrication: Three-dimensional printed electronics , 2015, Nature.

[79]  F. Brewer.  Additive manufacturing : costs, cost effectiveness and industry economics , 2015 .

[80]  Ian Gibson,et al.  Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing , 2015 .

[81]  Chee Kai Chua,et al.  3D printing and additive manufacturing : principles and applications , 2015 .

[82]  J. Franke,et al.  Investigations in the Optimization of Power Electronics Packaging through Additive Plasma Technology , 2015 .

[83]  Hans Nørgaard Hansen,et al.  Quality investigation of miniaturized Moulded Interconnect Devices (MIDs) for hearing aid applications , 2015 .

[84]  Ben Wang,et al.  Aerosol jet printing for 3-D multilayer passive microwave circuitry , 2014, 2014 44th European Microwave Conference.

[85]  J. Franke,et al.  Investigations on advanced soldering mechanisms for transient liquid phase soldering (TLPS) in power electronics , 2014, Proceedings of the 5th Electronics System-integration Technology Conference (ESTC).

[86]  Lihui Wang,et al.  From Cloud manufacturing to Cloud remanufacturing: A Cloud-based approach for WEEE recovery , 2014 .

[87]  Liang Gao,et al.  Disassembly sequence planning using a Simplified Teaching-Learning-Based Optimization algorithm , 2014, Adv. Eng. Informatics.

[88]  Steve Simon,et al.  Options for additive rapid prototyping methods (3D printing) in MEMS technology , 2014 .

[89]  Agata Skwarek,et al.  Voids investigation in solder joints performed with vapour phase soldering (VPS) , 2014 .

[90]  Adeel Ahmad Bajwa,et al.  Comparison of new die-attachment technologies for power electronic assemblies , 2014, 2014 IEEE 64th Electronic Components and Technology Conference (ECTC).

[91]  J. Wilde,et al.  Assembly and packaging technologies for high-temperature and high-power GaN HEMTs , 2014, 2014 IEEE 64th Electronic Components and Technology Conference (ECTC).

[92]  J. Franke,et al.  Selective light sintering of Aerosol-Jet printed silver nanoparticle inks on polymer substrates , 2014 .

[93]  M. Z. Abdullah,et al.  CFD modeling of pin shape effects on capillary flow during wave soldering , 2014 .

[94]  A. Bajwa,et al.  Foil Based Transient Liquid Phase Bonding as a Die-Attachment Method for High Temperature Devices , 2014 .

[95]  M. Kaloudis,et al.  Computed-Tomography-Based Analysis of Voids in SnBi57Ag1 Solder Joints and Their Influence on the Reliability , 2014, Journal of Failure Analysis and Prevention.

[96]  Ryan B. Wicker,et al.  3D Printing multifunctionality: structures with electronics , 2014 .

[97]  Tony Lentz.  PERFORMANCE ENHANCING NANO-COATINGS: CHANGING THE RULES OF STENCIL DESIGN , 2014 .

[98]  Lihui Wang,et al.  A cloud-based approach for WEEE remanufacturing , 2014 .

[99]  J. Hoerber,et al.  Approaches for Additive Manufacturing of 3D Electronic Applications , 2014 .

[100]  Gale Raj‐Reichert.  Ups and downs in the electronics industry: Fluctuating production and the use of temporary and other forms of employment , 2014 .

[101]  Dong‐sheng Li,et al.  Novel flexible electrically conductive adhesives from functional epoxy, flexibilizers, micro-silver flakes and nano-silver spheres for electronic packaging , 2013 .

[102]  J. Franke,et al.  Reliable packaging technologies for power electronics: Diffusion soldering and heavy copper wire bonding , 2013, 2013 3rd International Electric Drives Production Conference (EDPC).

[103]  Jing Sun,et al.  A RFID-based tracking service of Waste Electrical and Electronic Equipment , 2013, Proceedings of the 2013 IEEE 17th International Conference on Computer Supported Cooperative Work in Design (CSCWD).

[104]  F. C. Lee,et al.  On a Future for Power Electronics , 2013, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[105]  J. Wilde,et al.  Investigation of modern electrically conductive adhesives for die-attachment in power electronics applications , 2013, 2013 IEEE 63rd Electronic Components and Technology Conference.

[106]  Andreas Fix,et al.  Failure mechanisms of sintered silver interconnections for power electronic applications , 2013, 2013 IEEE 63rd Electronic Components and Technology Conference.

[107]  Christopher Kaestle,et al.  Optimized thin-film diffusion soldering for power-electronics production , 2013, Proceedings of the 36th International Spring Seminar on Electronics Technology.

[108]  Process optimization and characterization of a novel micro-scaled silver sintering paste as a die-attach material for high temperature high power semiconductor devices , 2013, Proceedings of the 36th International Spring Seminar on Electronics Technology.

[109]  Jinhui Li,et al.  Regional or global WEEE recycling. Where to go? , 2013, Waste management.

[110]  O. Ziegler.  Waste Electrical and Electronic Equipment , 2013 .

[111]  Hermann Seitz,et al.  A review on 3D micro-additive manufacturing technologies , 2012, The International Journal of Advanced Manufacturing Technology.

[112]  Z. Illyefalvi-Vitéz,et al.  Process parameter optimization of selective soldering , 2012, 2012 IEEE 18th International Symposium for Design and Technology in Electronic Packaging (SIITME).

[113]  Ben Wang,et al.  Fabrication and characterization of aerosol-jet printed strain sensors for multifunctional composite structures , 2012 .

[114]  N. Heuck,et al.  New assembly and interconnect technologies for power modules , 2012, 2012 7th International Conference on Integrated Power Electronics Systems (CIPS).

[115]  Keiichi Shimizu,et al.  Latest trends in LED lighting , 2012 .

[116]  M. Nowottnick,et al.  Reduction of Voids in Solder Joints an Alternative to Vacuum Soldering , 2012 .

[117]  Johanna Swan,et al.  High-speed performance of Silicon Bridge die-to-die interconnects , 2011, 2011 IEEE 20th Conference on Electrical Performance of Electronic Packaging and Systems.

[118]  Yong-Won Lee,et al.  Process characterization and reliability for the assembly of 01005 chip components , 2011 .

[119]  Jorg Franke,et al.  3D-Assembly of Molded Interconnect Devices with standard SMD pick & place machines using an active multi axis workpiece carrier , 2011, 2011 IEEE International Symposium on Assembly and Manufacturing (ISAM).

[120]  Mark Johnson,et al.  Die Attach of Power Devices Using Silver Sintering - Bonding Process Optimization and Characterization , 2011 .

[121]  Matthias Schumann,et al.  Rfid-based individualization of extended producer responsibility and recycling for weee , 2011, ECIS.

[122]  Paul Conway,et al.  New lifecycle monitoring system for electronic manufacturing with embedded wireless components , 2010 .

[123]  K. Cheong,et al.  A Review on Die Attach Materials for SiC-Based High-Temperature Power Devices , 2010 .

[124]  C. Gobl,et al.  Low temperature sinter technology die attachment for power electronic applications , 2010, 2010 6th International Conference on Integrated Power Electronics Systems.

[125]  Stephan Paredes,et al.  Mass production of planar polymer waveguides and their applications , 2010, OPTO.

[126]  Tsai-Chi Kuo,et al.  The construction of a collaborative-design platform to support waste electrical and electronic equipment recycling , 2010 .

[127]  M. Koyanagi,et al.  3D heterogeneous opto-electronic integration technology for system-on-silicon (SOS) , 2009, 2009 IEEE International Electron Devices Meeting (IEDM).

[128]  Hsien-Hsin S. Lee,et al.  Test Challenges for 3D Integrated Circuits , 2009, IEEE Design & Test of Computers.

[129]  Dongkai Shangguan,et al.  Head in pillow (HIP) and yield study on SIP and PoP assembly , 2009, 2009 59th Electronic Components and Technology Conference.

[130]  Guoqi Zhang,et al.  More than Moore: Creating High Value Micro/Nanoelectronics Systems , 2009 .

[131]  Martin Grunow,et al.  Designing the reverse network for WEEE in Denmark , 2009 .

[132]  Klaus Feldmann,et al.  Montage in der Leistungselektronik für globale Märkte , 2009 .

[133]  Shahin Rahimifard,et al.  Recycling process planning for the End-of-Life management of waste from electrical and electronic equipment , 2009 .

[134]  Daniel Lu,et al.  Materials for Advanced Packaging , 2008 .

[135]  H. Jain,et al.  International Conference on Microwave-08 Comparision of Wide Band Gap Semiconductors for Power Electronics Applications , 2009 .

[136]  T.C. Cucu,et al.  1D and 2D solutions for traceability in an Electronic Manufacturing Services company , 2008, 2008 31st International Spring Seminar on Electronics Technology.

[137]  Klaus Feldmann,et al.  Automated assembly of electro-optical components onto printed circuit boards with integrated optical waveguides , 2008, Prod. Eng..

[138]  Yasushi Umeda,et al.  Efficiency and feasibility of product disassembly: A case-based study , 2008 .

[139]  Robert Bogue,et al.  Design for disassembly: a critical twenty‐first century discipline , 2007 .

[140]  Safa Kasap,et al.  Springer Handbook of Electronic and Photonic Materials , 2007 .

[141]  Lin Jia-y,et al.  Road vehicles-Environmental conditions and testing for electrical and electronic equipment Part 3:Mechanical loads(ISO 16750-3:2003) , 2007 .

[142]  Sung Kyu Lim,et al.  Multiobjective Microarchitectural Floorplanning for 2-D and 3-D ICs , 2007, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems.

[143]  Oliver Kückmann,et al.  High-power LED arrays: special requirements on packaging technology , 2006, SPIE OPTO.

[144]  J. Triggs,et al.  Traceability Requirements in Electronics Assembly , 2006 .

[145]  Raghbir Singh Khandpur,et al.  Printed circuit boards : design, fabrication, assembly and testing , 2006 .

[146]  Kia Bazargan,et al.  Placement and routing in 3D integrated circuits , 2005, IEEE Design & Test of Computers.

[147]  R. Jarvina,et al.  01005 SMT component assembly for wireless SIP modules , 2005, Proceedings Electronic Components and Technology, 2005. ECTC '05..

[148]  J. M. Chimenos,et al.  Using the recyclability index of materials as a tool for design for disassembly , 2004 .

[149]  Roland Zengerle,et al.  PipeJet: A Simple Disposable Dispenser for the Nano- and Microliter Range , 2004 .

[150]  R.R. Tummala,et al.  SOP: what is it and why? A new microsystem-integration technology paradigm-Moore's law for system integration of miniaturized convergent systems of the next decade , 2004, IEEE Transactions on Advanced Packaging.

[151]  Guenther Seliger,et al.  Disassembly factories for electrical and electronic products to recover resources in product and material cycles. , 2003, Environmental science & technology.

[152]  E. Santi,et al.  An assessment of wide bandgap semiconductors for power devices , 2003 .

[153]  A. Lambert.  Determining optimum disassembly sequences in electronic equipment , 2002 .

[154]  David Harrison,et al.  Shape memory alloy actuators for active disassembly using ‘smart’ materials of consumer electronic products , 2002 .

[155]  G. Whitesides,et al.  Self-Assembly at All Scales , 2002, Science.

[156]  David Harrison,et al.  An initial investigation into active disassembly using shape memory polymers , 2001 .

[157]  C. Band.  High resolution printed circuits , 2001 .

[158]  K. Utsumi,et al.  New high-density multilayer technology on PCB , 1998, 1998 Proceedings. 48th Electronic Components and Technology Conference (Cat. No.98CH36206).

[159]  G.E. Moore,et al.  Cramming More Components Onto Integrated Circuits , 1998, Proceedings of the IEEE.

[160]  T. Eagar,et al.  Transient Liquid Phase Bonding , 1992 .