Optimisation of the vehicle transmission and the gear-shifting strategy for the minimum fuel consumption and the minimum nitrogen oxide emissions

The paper outlines a computationally efficient analytical method for evaluating the fuel consumption and the nitrogen oxide emissions during manoeuvres pertaining to the New European Driving Cycle. An integrated optimisation procedure is also included in the analyses with minimisation of the brake specific fuel consumption and minimisation of the nitrogen oxide emissions as objective functions. A set of optimum gear ratios are determined for a four-speed transmission, a five-speed transmission and six-speed transmission as the governing parameters in the optimisation process. The analysis highlights the determination of gear-shifting objective-driven strategies based on the minimisation of either of the declared objective functions. A reduction of 7.5% in the brake specific fuel consumption and a reduction of 6.75% in nitrogen oxide emissions are attainable in the best-case scenario for a six-speed transmission and a gear-shifting strategy based on the lowest brake specific fuel consumption for the case of an engine. The novel integrated analytical simulations and multi-objective optimisation have not been hitherto reported in literature. It provides the opportunity for an objective intelligent-based approach to the use of gear shift indicator technology. The results of this study also show that transmission optimisation can act as an effective and inexpensive mean to enhance the fuel efficiency and to reduce the emissions.

[1]  C. Schernus,et al.  Turbocharging of Downsized Gasoline DI Engines with 2 and 3 Cylinders , 2011 .

[2]  James Turner,et al.  Exploitation of Energy Resources and Future Automotive Fuels , 2007 .

[3]  Jaideep Singh,et al.  Selection of Gear Ratio for Smooth Gear Shifting , 2012 .

[4]  Danilo J. Santini,et al.  Reduction in Global Warming due to Fuel Economy Improvements and Emissions Control of Criteria Pollutants: New US. Light-Duty Vehicles (19684991) , 1992 .

[5]  J King,et al.  The King Review of low-carbon cars: part I: the potential for CO2 reduction , 2007 .

[6]  Nicolò Cavina,et al.  Model-Based Assessment of Hybrid Powertrain Solutions , 2011 .

[7]  Homer Rahnejat,et al.  Transmission efficiency and noise, vibration and harshness refinement of differential hypoid gear pairs , 2014 .

[8]  Sam Akehurst,et al.  Development of a new method to assess fuel saving using gear shift indicators , 2012 .

[9]  Gianluca Vitale,et al.  DoE and Beyond — Evolution of the Model-based Development Approach , 2015 .

[10]  T D Gillespie,et al.  Fundamentals of Vehicle Dynamics , 1992 .

[11]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[12]  S Latham,et al.  A reference book of driving cycles for use in the measurement of road vehicle emissions , 2009 .

[13]  N. Fraser,et al.  Challenges for Increased Efficiency through Gasoline Engine Downsizing , 2009 .

[14]  Homer Rahnejat,et al.  Mode identification in impact-induced high-frequency vehicular driveline vibrations using an elasto-multi-body dynamics approach , 2004 .

[15]  H Rahnejat,et al.  An investigation of manual transmission drive rattle , 2010 .

[16]  Aik Soon Lee,et al.  Simulations of gas turbine performance: Influence of gas-behaviour modelling , 2010 .

[17]  Homer Rahnejat,et al.  Multi-Body Dynamics: Vehicles, Machines and Mechanisms , 1998 .

[18]  M L Williams.  Improving Air Quality: Progress and Challenges for the Auto Industry , 2003 .

[19]  James Turner,et al.  Fuel Economy Improvement Using Combined CAI and Cylinder Deactivation (CDA) - An Initial Study , 2005 .

[20]  Charles Van Horn,et al.  Steady State and Transient Efficiencies of a Four Cylinder Direct Injection Diesel Engine For Implementation in a Hybrid Electric Vehicle , 2006 .

[21]  Sam Akehurst,et al.  A Driver Advisory Tool to Reduce Fuel Consumption , 2013 .