Ducted fuel injection: A new approach for lowering soot emissions from direct-injection engines

Designers of direct-injection compression-ignition engines use a variety of strategies to improve the fuel/charge-gas mixture within the combustion chamber for increased efficiency and reduced pollutant emissions. Strategies include the use of high fuel-injection pressures, multiple injections, small injector orifices, flow swirl, long-ignition-delay conditions, and oxygenated fuels. This is the first journal publication on a new mixing-enhancement strategy for emissions reduction: ducted fuel injection. The concept involves injecting fuel along the axis of a small cylindrical duct within the combustion chamber, to enhance the mixture in the autoignition zone relative to a conventional free-spray configuration (i.e., a fuel spray that is not surrounded by a duct). The results described herein, from initial proof-of-concept experiments conducted in a constant-volume combustion vessel, show dramatically lower soot incandescence from ducted fuel injection than from free sprays over a range of charge-gas conditions that are representative of those in modern direct-injection compression-ignition engines.

[1]  M. McLinden,et al.  NIST Standard Reference Database 23: Reference Fluid Thermodynamic and Transport Properties-REFPROP, Version 9.1 | NIST , 2013 .

[2]  Raul Payri,et al.  Engine combustion network (ECN): characterization and comparison of boundary conditions for different combustion vessels , 2012 .

[3]  Ryan K. Gehmlich,et al.  Leaner Lifted-Flame Combustion Enabled by the Use of an Oxygenated Fuel in an Optical CI Engine , 2016 .

[4]  H. Schlichting.  Boundary Layer Theory , 1955 .

[5]  Carl de Boor,et al.  A Practical Guide to Splines , 1978, Applied Mathematical Sciences.

[6]  Dennis L. Siebers,et al.  Relationship Between Diesel Fuel Spray Vapor Penetration/Dispersion and Local Fuel Mixture Fraction , 2011 .

[7]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[8]  Dennis L. Siebers,et al.  Diesel-Spray Ignition and Premixed-Burn Behavior , 2000 .

[9]  Dennis L. Siebers,et al.  Liquid-Phase Fuel Penetration in Diesel Sprays , 1998 .

[10]  Dennis L. Siebers,et al.  Non-Sooting, Low Flame Temperature Mixing-Controlled DI Diesel Combustion , 2003 .

[11]  Ashwin W. Patwardhan,et al.  Characteristics of turbulent confined jets , 2008 .

[12]  E. Razinsky,et al.  Confined Jet Mixing for Nonseparating Conditions , 1971 .

[13]  Caroline L. Genzale,et al.  Comparison of Diesel Spray Combustion in Different High-Temperature, High-Pressure Facilities , 2010 .

[14]  Somnath C. Roy,et al.  Toward solar fuels: photocatalytic conversion of carbon dioxide to hydrocarbons. , 2010, ACS nano.

[15]  C. Westbrook,et al.  A Comprehensive Modeling Study of n-Heptane Oxidation , 1998 .

[16]  C. Mueller,et al.  The Influence of Charge-Gas Dilution and Temperature on DI Diesel Combustion Processes Using a Short-Ignition-Delay, Oxygenated Fuel , 2005 .

[17]  Adam B. Dempsey,et al.  Understanding Hydrocarbon Emissions in Heavy Duty Diesel Engines Combining Experimental and Computational Methods , 2017 .

[18]  Charles J. Mueller,et al.  An Experimental Investigation of Low-Soot and Soot-Free Combustion Strategies in a Heavy-Duty, Single-Cylinder, Direct-Injection, Optical Diesel Engine , 2011 .

[19]  Ingrid Isenhardt,et al.  Going diverse in the two Clusters of Excellence “Integrative Production Technology for High-wage Countries” and “Tailor-Made Fuels from Biomass” at RWTH Aachen University , 2011 .

[20]  R. Curtet,et al.  On the Tendency to Self-Preservation in Axisymmetric Ducted Jets , 1964 .

[21]  Charles J. Mueller,et al.  Effects of Oxygenated Compounds on Combustion and Soot Evolution in a DI Diesel Engine:Broadband Natural Luminosity Imaging , 2002 .

[22]  Öivind Andersson,et al.  Analysis of Smokeless Spray Combustion in a Heavy-Duty Diesel Engine by Combined Simultaneous Optical Diagnostics , 2009 .

[23]  Kyle Kattke,et al.  Entrainment Waves in Diesel Jets , 2009 .

[24]  M. Barchilon,et al.  Some Details of the Structure of an Axisymmetric Confined Jet With Backflow , 1964 .

[25]  Derek A. Splitter,et al.  SI Engine Trends: A Historical Analysis with Future Projections , 2015 .

[26]  Heinz Pitsch,et al.  Effects of strain rate on high-pressure nonpremixed n-heptane autoignition in counterflow , 2004 .

[27]  F. R. B. Watson.  The Production of a Vacuum in an Air Tank by Means of a Steam Jet , 1933 .

[28]  Öivind Andersson,et al.  Diesel Spray Ignition Detection and Spatial/Temporal Correction. , 2012 .

[29]  B. DeAngelo,et al.  Bounding the role of black carbon in the climate system: A scientific assessment , 2013 .

[30]  Dennis L. Siebers,et al.  Scaling Liquid-Phase Fuel Penetration in Diesel Sprays Based on Mixing-Limited Vaporization , 1999 .

[31]  J. Dec.  A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging* , 1997 .

[32]  H. Roscoe,et al.  XVII. Photo-chemical researches.—Part I. Measurement of the chemical action of light , 1857, Philosophical Transactions of the Royal Society of London.

[33]  Charles Ris,et al.  U.S. EPA Health Assessment for Diesel Engine Exhaust: A Review , 2007, Inhalation toxicology.