Water vapor volatilization and oxidation induced surface cracking of environmental barrier coating systems: A numerical approach

[1]  Xueqiang Cao,et al.  Thermal shock resistance and bonding strength of tri-layer Yb2SiO5/mullite/Si coating on SiCf/SiC composites , 2020 .

[2]  X. Ren,et al.  High temperature corrosion of (Er0.25Tm0.25Yb0.25Lu0.25)2Si2O7 environmental barrier coating material subjected to water vapor and molten calcium–magnesium–aluminosilicate (CMAS) , 2020 .

[3]  S. Sampath,et al.  Characterization of Yb2Si2O7–Yb2SiO5 composite environmental barrier coatings resultant from in situ plasma spray processing , 2020 .

[4]  Yiguang Wang,et al.  Oxygen diffusion through environmental barrier coating materials , 2020 .

[5]  D. Fang,et al.  Advances in numerical modeling of environmental barrier coating systems for gas turbines , 2020 .

[6]  R. Vaßen,et al.  An investigation on burner rig testing of environmental barrier coatings for aerospace applications , 2020 .

[7]  E. Opila,et al.  Thermochemical stability and microstructural evolution of Yb2Si2O7 in high-velocity high-temperature water vapor , 2020 .

[8]  Hongbo Guo,et al.  Microstructures and Phases of Ytterbium Silicate Coatings Prepared by Plasma Spray-Physical Vapor Deposition , 2020, Materials.

[9]  Guo Liu,et al.  Interface evolution of Si/Mullite/Yb2SiO5 PS-PVD environmental barrier coatings under high temperature , 2020 .

[10]  R. Vaßen,et al.  High-velocity water vapor corrosion of Yb-silicate: Sprayed vs. sintered body , 2020 .

[11]  M. Begley,et al.  Transition from penetration cracking to spallation in environmental barrier coatings on ceramic composites , 2019, Surface and Coatings Technology.

[12]  Dianying Chen,et al.  Environmental barrier coatings using low pressure plasma spray process , 2019, Journal of the American Ceramic Society.

[13]  R. Vaßen,et al.  Effect of processing on high-velocity water vapor recession behavior of Yb-silicate environmental barrier coatings , 2019, Journal of the European Ceramic Society.

[14]  N. Padture.  Environmental degradation of high-temperature protective coatings for ceramic-matrix composites in gas-turbine engines , 2019, npj Materials Degradation.

[15]  N. Padture,et al.  Towards multifunctional thermal environmental barrier coatings (TEBCs) based on rare-earth pyrosilicate solid-solution ceramics , 2018, Scripta Materialia.

[16]  Tie-jun Wang,et al.  Towards enhanced sintering resistance: Air-plasma-sprayed thermal barrier coating system with porosity gradient , 2017 .

[17]  William E Lee,et al.  Water vapour corrosion of rare earth monosilicates for environmental barrier coatings application , 2017 .

[18]  Fangfang Xu,et al.  Rare earth silicate environmental barrier coatings: Present status and prospective , 2017 .

[19]  A. Wróblewski,et al.  Durability Analysis and Experimental Validation of Environmental Barrier Coating (EBC) Performance Using Combined Digital Image Correlation and NDE , 2016 .

[20]  H. Wadley,et al.  Response of ytterbium disilicate–silicon environmental barrier coatings to thermal cycling in water vapor , 2016 .

[21]  H. Wadley,et al.  Fracture mechanisms of ytterbium monosilicate environmental barrier coatings during cyclic thermal exposure , 2016 .

[22]  H. Wadley,et al.  Mechanisms of Ytterbium Monosilicate/Mullite/Silicon Coating Failure During Thermal Cycling in Water Vapor , 2015 .

[23]  Kang N. Lee.  Environmental Barrier Coatings for SiCf/SiC , 2014 .

[24]  J. Grady,et al.  Durability Modeling of Environmental Barrier Coating (EBC) Using Finite Element Based Progressive Failure Analysis , 2014 .

[25]  Yanchun Zhou,et al.  Theoretical Prediction and Experimental Investigation on the Thermal and Mechanical Properties of Bulk β‐Yb2Si2O7 , 2013 .

[26]  C. Heveran,et al.  Simulation of stresses in TBC–EBC coating systems for ceramic components in gas turbines , 2013 .

[27]  Tie-jun Wang,et al.  The surface cracking behavior in air plasma sprayed thermal barrier coating system incorporating interface roughness effect , 2011 .

[28]  Tie-jun Wang,et al.  Investigation on periodic cracking of elastic film/substrate system by the extended finite element method , 2011 .

[29]  A. Evans,et al.  Delamination Susceptibility of Coatings Under High Thermal Flux , 2009 .

[30]  J. Almer,et al.  Residual Stress Analysis of Multilayer Environmental Barrier Coatings , 2009 .

[31]  T. Hashida,et al.  Coupled effects of temperature gradient and oxidation on thermal stress in thermal barrier coating system , 2001 .

[32]  Tie-jun Wang,et al.  Effects of sintering and mixed oxide growth on the interface cracking of air-plasma-sprayed thermal barrier coating system at high temperature , 2016 .

[33]  J. Hutchinson,et al.  The Influence of Transient Thermal Gradients and Substrate Constraint on Delamination of Thermal Barrier Coatings , 2013 .

[34]  D. Clarke,et al.  Stress Distributions in Plasma-Sprayed Thermal Barrier Coatings Under Thermal Cycling in a Temperature Gradient , 2011 .