Asymmetric Incremental Sheet Forming

The use of computers in manufacturing has enabled the development of several new sheet metal forming processes. This paper describes modifications that have been made to traditional forming methods such as conventional spinning and shear forming, where deformation is localized. Recent advances have enabled this localized deformation to be accurately controlled and studied. Current developments have been focused on forming asymmetric parts using CNC technology, without the need for costly dies. Asymmetric Incremental Forming has the potential to revolutionize sheet metal forming, making it accessible to all levels of manufacturing.

[1]  Betzalel Avitzur,et al.  Analysis of power spinning of cones , 1960 .

[2]  I. K. Hall,et al.  A Theory of Shear Spinning of Cones , 1961 .

[3]  Richard L. Kegg,et al.  A New Test Method for Determination of Spinnability of Metals , 1961 .

[4]  Serope Kalpakcioglu,et al.  On the Mechanics of Shear Spinning , 1961 .

[5]  Serope Kalpakcioglu,et al.  A Study of Shear-Spinnability of Metals , 1961 .

[6]  P. B. Mellor,et al.  Plasticity for mechanical engineers , 1962 .

[7]  E. G. Thomsen,et al.  Mechanics of Conventional Spinning , 1963 .

[8]  E. G. Thomsen,et al.  Mechanics of plastic deformation in metal processing , 1965 .

[9]  D. Stewart,et al.  A Platform with Six Degrees of Freedom , 1965 .

[10]  D. Stewart,et al.  A Platform with Six Degrees of Freedom , 1965 .

[11]  Siegfried S. Hecker,et al.  Strain hardening of heavily cold-worked metals , 1982 .

[12]  Jack Jeswiet,et al.  A friction sensor for sheet-metal rolling , 1991 .

[13]  Dieter Schmoeckel.  Developments in Automation, Flexibilization and Control of Forming Machinery , 1991 .

[14]  Takeo Nakagawa,et al.  Recent Developments in Auto Body Panel Forming Technology , 1993 .

[15]  F. Vollertsen,et al.  The Mechanisms of Laser Forming , 1993 .

[16]  Kazuo Ozaki,et al.  Flexible and Inclemental Sheet Metal Bulging Using a Few Spherical Rollers. , 1993 .

[17]  Manfred Geiger,et al.  Synergy of Laser Material Processing and Metal Forming , 1994 .

[18]  Koro Yaejima,et al.  Metal-flow phenomena in computerized numerically controlled incremental stretch-expanding of aluminum sheets. , 1996 .

[19]  Shintaro Hayashi,et al.  Hemispherical stretch-expanding of aluminum sheet by computerized numerically controlled incremental forming process with two path method. , 1996 .

[20]  Masakatsu Nakane,et al.  Hemi-ellipsoidal stretch-expanding of aluminum sheet by CNC incremental forming process with two path method. , 1997 .

[21]  Kimiyoshi Kitazawa.  Limit strains for CNC incremental stretch-expanding of aluminum sheets. , 1997 .

[22]  James Brown,et al.  Advanced Machining Technology Handbook , 1998 .

[23]  J. Jeswiet,et al.  Incremental Single Point Forming , 2000, Manufacturing Engineering.

[24]  Dong-Yol Yang,et al.  Improvement of formability for the incremental sheet metal forming process , 2000 .

[25]  H. Iseki,et al.  An approximate deformation analysis and FEM analysis for the incremental bulging of sheet metal using a spherical roller , 2001 .

[26]  Hideo Iseki,et al.  Flexible and Incremental Bulging of Sheet Metal Using High-Speed Water Jet , 2001 .

[27]  YuMing Zhang,et al.  Flexible Forming of Sheet Metal Using Plasma Arc , 1999, Manufacturing Science and Engineering.

[28]  Sharon M. Ordoobadi,et al.  Development of a justification tool for advanced manufacturing technologies: system-wide benefits value analysis , 2001 .

[29]  H. Mueller.  EXPERIENCES USING RAPID PROTOTYPING TECHNIQUES TO MANUFACTURE SHEET METAL FORMING TOOLS 00 SE 008 , 2001 .

[30]  J. J. Park,et al.  Effect of process parameters on formability in incremental forming of sheet metal , 2002 .

[31]  Fabrizio Micari,et al.  Analysis of Material Formability in Incremental Forming , 2002 .

[32]  E Hagan,et al.  Forming parameters for incremental forming of aluminium alloy sheet metal , 2002 .

[33]  Reiner Kopp,et al.  Flexible Sheet Forming Technology by Double-sided Simultaneous Shot Peen Forming , 2002 .

[34]  Eckhard Beyer,et al.  Recent developments in metal laminated tooling by multiple laser processing , 2003 .

[35]  E Hagan,et al.  Effect of wall angle on Al 3003 strain hardening for parts formed by computer numerical control incremental forming , 2003 .

[36]  P McAllister,et al.  Medical device regulation for manufacturers , 2003, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[37]  Markus Bambach,et al.  Process Limits and Material Behaviour in Incremental Sheet Forming with CNC-Tools , 2003 .

[38]  Jack Jeswiet,et al.  A review of conventional and modern single-point sheet metal forming methods , 2003 .

[39]  Suck-Joo Na,et al.  Development of irradiation strategies for free curve laser forming , 2003 .

[40]  F. Micari,et al.  Influence of mechanical properties of the sheet material on formability in single point incremental forming , 2004 .

[41]  Markus Bambach,et al.  Forming strategies and Process Modelling for CNC Incremental Sheet Forming , 2004 .

[42]  M. Muzzupappa,et al.  Influence of some relevant process parameters on the dimensional accuracy in incremental forming: a numerical and experimental investigation , 2004 .

[43]  W. B. Lievers,et al.  Using incremental forming to calibrate a void nucleation model for automotive aluminum sheet alloys , 2004 .

[44]  J Jeswiet,et al.  Wall thickness variations in single-point incremental forming , 2004 .

[45]  Fabrizio Micari,et al.  Process Mechanics Analysis in Single Point Incremental Forming , 2004 .

[46]  E Hagan,et al.  Analysis of surface roughness for parts formed by computer numerical controlled incremental forming , 2004 .

[47]  Markus Bambach,et al.  Modeling of Optimization Strategies in the Incremental CNC Sheet Metal Forming Process , 2004 .

[48]  J. Jeswiet,et al.  Forces in Single Point and Two Point Incremental Forming , 2005 .

[49]  Julian M. Allwood,et al.  A structured search for applications of the incremental sheet-forming process by product segmentation , 2005 .

[50]  Joost Duflou,et al.  Custom Manufacture of a Solar Cooker – A Case Study , 2005 .

[51]  J Jeswiet,et al.  Forming limit diagrams for single-point incremental forming of aluminium sheet , 2005 .

[52]  Julian M. Allwood,et al.  The Design of an Incremental Sheet Forming Machine , 2005 .

[53]  Markus Bambach,et al.  A new forming strategy to realise parts designed for deep-drawing by incremental CNC sheet forming , 2005 .

[54]  Horst Meier,et al.  Development of a Robot‐Based Sheet Metal Forming Process , 2005 .

[55]  Rolf Dieter Schraft,et al.  Incremental sheet metal forming by industrial robots , 2005 .

[56]  Frank Wüstefeld,et al.  Towards Peen Forming Process Automation , 2006 .