FPGA-Based Vehicular Channel Emulator for Real-Time Performance Evaluation of IEEE 802.11p Transceivers

IEEE 802.11p is one of the most promising future wireless standards due to the increasing demand of vehicular communication applications. At the time of writing, the document of the standard is in draft and much research is still required to study and improve the performance of transceivers in common vehicular scenarios. In this paper, we present a framework to evaluate the PHY layer of IEEE 802.11p systems in realistic situations. We detail the design and implementation of an FPGA-based real-time vehicular channel emulator. Contrarily to commercial emulators, ours is cheap, very flexible, and reconfigurable. We show its capabilities by evaluating performance in different high-speed scenarios. We also study the importance of coding and the benefits of using IEEE 802.11p instead of IEEE 802.11a in vehicular environments. Towards this aim, we developed a reference IEEE 802.11p PHY transceiver software model that can be taken as a convenient starting point for transceiver design.

[1]  Ragunathan Rajkumar,et al.  A Multi-hop Mobile Networking Test-bed for Telematics , 2005 .

[2]  Guillermo Acosta-Marum.  Measurement, Modeling, and OFDM Synchronization for the Wideband Mobile-to-Mobile Channel , 2007 .

[3]  Sung-Mo Kang,et al.  0.18um CMOS integrated chipset for 5.8GHz DSRC systems with +10dBm output power , 2008, 2008 IEEE International Symposium on Circuits and Systems.

[4]  Jeich Mar,et al.  Realization of OFDM Modulator and Demodulator for DSRC Vehicular Communication System Using FPGA Chip , 2006, 2006 International Symposium on Intelligent Signal Processing and Communications.

[5]  Jean-Luc Danger,et al.  Design and performance analysis of a high speed AWGN communication channel emulator , 2001, 2001 IEEE Pacific Rim Conference on Communications, Computers and Signal Processing (IEEE Cat. No.01CH37233).

[6]  Bruce F. Cockburn,et al.  An Accurate and Compact Rayleigh and Rician Fading Channel Simulator , 2008, VTC Spring 2008 - IEEE Vehicular Technology Conference.

[7]  K. Psounis,et al.  IEEE 802.11p performance evaluation and protocol enhancement , 2008, 2008 IEEE International Conference on Vehicular Electronics and Safety.

[8]  Kemal Ertugrul Tepe,et al.  Iterative Channel-Tracking Techniques for 5.9 GHz DSRC Applications , 2008, J. Electr. Comput. Eng..

[9]  Mahdi Abbasi,et al.  Characterization of a 5GHz Modular Radio Frontend for WLAN Based on IEEE 802.11p , 2008 .

[10]  Stephan Eichler,et al.  Performance Evaluation of the IEEE 802.11p WAVE Communication Standard , 2007, 2007 IEEE 66th Vehicular Technology Conference.

[11]  L. Deneire,et al.  On equalization for OFDM-dedicated short range communication (DSRC) modem , 2000, 2000 IEEE International Conference on Personal Wireless Communications. Conference Proceedings (Cat. No.00TH8488).

[12]  Florian Kaltenberger,et al.  A scalable rapid prototyping system for real-time MIMO OFDM transmissions , 2005 .

[13]  M. Gonzalez-Lopez,et al.  FlexVehd: A flexible testbed for vehicular radio interfaces , 2008, 2008 8th International Conference on ITS Telecommunications.

[14]  Jun Yamada,et al.  Dual Receiver Communication System for DSRC , 2008, 2008 Second International Conference on Future Generation Communication and Networking.

[15]  Jean-Luc Danger,et al.  Design of High Speed AWGN Communication Channel Emulator , 2003 .

[16]  Jeich Mar,et al.  Performance Improvement of the DSRC System Using a Novel S and PI-Decision Demapper , 2008, ICC Workshops - 2008 IEEE International Conference on Communications Workshops.

[17]  Jeng-Kuang Hwang,et al.  Fast FPGA prototyping of a multipath fading channel emulator via high-level design , 2007, 2007 International Symposium on Communications and Information Technologies.

[18]  Andreas Meier,et al.  Design of 5.9 ghz dsrc-based vehicular safety communication , 2006, IEEE Wireless Communications.

[19]  Babak Daneshrad,et al.  COTS-based DSRC testbed for rapid algorithm development, implementation, and test , 2006, WINTECH.

[20]  Luca Delgrossi,et al.  IEEE 802.11p: Towards an International Standard for Wireless Access in Vehicular Environments , 2008, VTC Spring 2008 - IEEE Vehicular Technology Conference.

[21]  Celestino A. Corral,et al.  Pseudo-pilot OFDM scheme for 802.11a and R/A in DSRC applications , 2003, 2003 IEEE 58th Vehicular Technology Conference. VTC 2003-Fall (IEEE Cat. No.03CH37484).

[22]  Jeng-Kuang Hwang,et al.  Efficient Structure for FPGA Implementation of a Configurable Multipath Fading Channel Emulator , 2006, 2006 International Symposium on Intelligent Signal Processing and Communications.

[23]  M. Abe,et al.  Single-chip 5.8GHz DSRC transceiver with dual-mode of ASK and Pi/4-QPSK , 2008, 2008 IEEE Radio and Wireless Symposium.

[24]  Geert Leus,et al.  Simple equalization of time-varying channels for OFDM , 2005, IEEE Communications Letters.

[25]  Mary Ann Ingram,et al.  Six Time- and Frequency-Selective Empirical Channel Models for Vehicular Wireless LANs , 2007, 2007 IEEE 66th Vehicular Technology Conference.

[26]  You-Rong Lin,et al.  Design of Software-Defined Radio Channel Simulator for Wireless Communications: Case Study With DSRC and UWB Channels , 2009, IEEE Transactions on Instrumentation and Measurement.

[27]  N. Borges Carvalho,et al.  Low cost transceiver for DSRC applications , 2006, 2006 Asia-Pacific Microwave Conference.

[28]  Yong-Hua Cheng,et al.  Adaptive Channel Equalizer for Wireless Access in Vehicular Environments , 2007, 2007 Digest of Technical Papers International Conference on Consumer Electronics.

[29]  Arpad L. Scholtz,et al.  Characterization of a 5 GHz Modular Radio Frontend for WLAN Based on , 2008 .