论文信息 - Characterization of PEDOT:PSS dilutions for inkjet printing applied to OLED fabrication

Characterization of PEDOT:PSS dilutions for inkjet printing applied to OLED fabrication

This paper presents results of different dilutions of PEDOT:PSS on the uniformity, pattern definition and conductivity of inkjet printed films. PEDOT:PSS was diluted in water, ethylene glycol (EG) and dimethyl sulfoxide, (DMSO) in order to achieve the required viscosity in the range of 2 to 30 cps. In order improve the surface tension a surfactant Tritonreg X100 was added to some of these dilutions. Deposited films were characterized to obtain their refractive index, thickness and resistivity. As a final result, a polymeric light emitting diode (PLED) structure was fabricated using copolymer (BEHP-PPV)-co-(MEH-PPV) as active layer.

[1] F. Chen,et al. High‐Conductivity Poly(3,4‐ethylenedioxythiophene):Poly(styrene sulfonate) Film and Its Application in Polymer Optoelectronic Devices , 2005 .

[2] Mats Andersson,et al. Synthesis and Characterization of Highly Soluble Phenyl-Substituted Poly(p-phenylenevinylenes). , 2000 .

[3] Ian D. Parker,et al. Carrier tunneling and device characteristics in polymer light-emitting diodes , 1994, Photonics West - Lasers and Applications in Science and Engineering.

[4] D. Ginley,et al. Electrical and Morphological Properties of Inkjet Printed Pedot/PSS Films , 2005 .

[5] M. Estrada,et al. Characterization of Thin Films of Conjugated Polymer (BEHP-PPV) -co-(MEH-PPV) for OLEDs Aplication , 2006, 2006 3rd International Conference on Electrical and Electronics Engineering.

[6] Weixin Li,et al. Maximizing Alq/sub 3/ OLED internal and external efficiencies: charge balanced device structure and color conversion outcoupling lenses , 2006, Journal of Display Technology.

[7] Yang Yang,et al. On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatment , 2004 .