Deformation modes of thin-walled members: A comparison between the method of Generalized Eigenvectors and Generalized Beam Theory

Abstract This paper compares two distinct approaches for obtaining the cross-section deformation modes of thin-walled members with deformable cross-section, namely the method of Generalized Eigenvectors (GE) and the Generalized Beam Theory (GBT). First, both approaches are reviewed, emphasizing their differences and similarities, as well as their resulting semi-analytical solutions. Then, the GE/GBT deformation modes for four selected cross-sections are calculated and examined in detail. Subsequently, attention is turned to the efficiency and accuracy of the GE/GBT mode sets in typical benchmark problems, namely the calculation of the global–local–distortional first-order and buckling (bifurcation) behaviors of bars with the previously analyzed cross-sections. It is concluded that GE and GBT, both based on the method of separation of variables, yield accurate results although they use different structural models and mode selection strategies. Therefore they offer complementary advantages, which are put forward in the paper.

[1]  M. Borri,et al.  Anisotropic beam theory and applications , 1983 .

[2]  Dinar Camotim,et al.  On the behaviour of thin-walled steel regular polygonal tubular members , 2013 .

[3]  Dorin Ieşan,et al.  Classical and Generalized Models of Elastic Rods , 2008 .

[4]  R. Vieira,et al.  A higher order model for thin-walled structures with deformable cross-sections , 2014 .

[5]  Raffaele Casciaro,et al.  The implicit corotational method and its use in the derivation of nonlinear structural models for beams and plates , 2012 .

[6]  Hsueh-Chun Lin,et al.  On Saint-Venant’s Problem for an Inhomogeneous, Anisotropic Cylinder—Part I: Methodology for Saint-Venant Solutions , 2001 .

[7]  Dinar Camotim,et al.  A new approach to the calculation of cross-section deformation modes in the framework of generalized beam theory , 2010 .

[8]  Dewey H. Hodges,et al.  Nonlinear Composite Beam Theory , 2006 .

[9]  J. M. Davies,et al.  First-order generalised beam theory , 1994 .

[10]  Dinar Camotim,et al.  Geometrically non-linear generalised beam theory for elastoplastic thin-walled metal members , 2012 .

[11]  Richard Schardt.  Lateral torsional and distortional buckling of channel- and hat-sections , 1994 .

[12]  Dinar Camotim,et al.  Elastic buckling of uniformly compressed thin-walled regular polygonal tubes , 2013 .

[13]  Dinar Camotim,et al.  GBT-based Structural Analysis of Thin-walled members: Overview, Recent Progress and Future Developments , 2006 .

[14]  Dinar Camotim,et al.  A cross-section analysis procedure to rationalise and automate the performance of GBT-based structural analyses , 2015 .

[15]  Alessandra Genoese,et al.  A generalized model for heterogeneous and anisotropic beams including section distortions , 2014 .

[16]  P. Mantegazza,et al.  Characteristic behavior of prismatic anisotropic beam via generalized eigenvectors , 2010 .

[17]  J. M. Davies,et al.  Second-order generalised beam theory , 1994 .

[18]  N. Silvestre,et al.  Numerical Analysis of Thin-Walled Structures using Generalised Beam Theory: Recent and Future Developments , 2010 .

[19]  Dinar Camotim,et al.  On the shear deformation modes in the framework of Generalized Beam Theory , 2014 .

[20]  R. E. Fatmi,et al.  Higher order composite beam theory built on Saint-Venant’s solution. Part-I: Theoretical developments , 2011 .

[21]  Alessandra Genoese,et al.  A mixed beam model with non-uniform warpings derived from the Saint Venànt rod , 2013 .

[22]  Alessandra Genoese,et al.  Buckling analysis through a generalized beam model including section distortions , 2014 .

[23]  Alessandra Genoese,et al.  A composite beam model including variable warping effects derived from a generalized Saint Venant solution , 2014 .

[24]  Pierre Ladevèze,et al.  New concepts for linear beam theory with arbitrary geometry and loading , 1998 .

[25]  R. Schardt.  Verallgemeinerte Technische Biegetheorie , 1989 .

[26]  Zhanjie Li,et al.  Buckling Analysis of Cold-formed Steel Members with General Boundary Conditions Using CUFSM Conventional and Constrained Finite Strip Methods , 2010 .

[27]  Dinar Camotim,et al.  Buckling analysis of thin‐walled steel structures using generalized beam theory (GBT): state‐of‐the‐art report , 2013 .

[28]  Raffaele Casciaro,et al.  Nonlinear FEM analysis for beams and plate assemblages based on the implicit corotational method , 2012 .