Analysis of Flux Measurements on a PMSM With Non-Overlapping Concentrated Windings

In this paper, measurements of the magnetic flux in a permanent magnet synchronous machine (PMSM) with non- overlapping concentrated windings are analyzed. Flux leakage, inductances and stator iron losses are investigated from measurements performed at open-circuit, blocked-rotor, and load conditions, respectively. Comparisons of the measurements with the corresponding 3D finite-element (FE) simulations allow validating thoroughly the FE model. The zigzag leakage flux flowing from one magnet to another through a tooth tip, which is characteristic for PMSMs with concentrated windings, is highlighted and its effect on the stator iron losses is investigated.

[1]  T.J.E. Miller,et al.  Field-weakening performance of brushless synchronous AC motor drives , 1994 .

[2]  F. Magnussen,et al.  Parasitic Effects in PM Machines With Concentrated Windings , 2005, IEEE Transactions on Industry Applications.

[3]  D. Howe,et al.  Effect of axial segmentation of permanent magnets on rotor loss of modular brushless machines , 2004, Conference Record of the 2004 IEEE Industry Applications Conference, 2004. 39th IAS Annual Meeting..

[4]  Libert,et al.  Manufacturing methods of stator cores with concentrated windings , 1988 .

[5]  Z.Q. Zhu,et al.  Comparison of PM brushless motors, having either all teeth or alternate teeth wound , 2006, IEEE Transactions on Energy Conversion.

[6]  J. Soulard,et al.  Incorporating Lamination Processing and Component Manufacturing in Electrical Machine Design Tools , 2007, 2007 IEEE Industry Applications Annual Meeting.

[7]  Thomas M. Jahns,et al.  Experimental verification of optimal flux weakening in surface PM machines using concentrated windings , 2005 .

[8]  T.A. Lipo,et al.  Analysis and modeling of air-gap and zigzag leakage fluxes in a surface-mounted permanent-magnet Machine , 2004, IEEE Transactions on Industry Applications.

[9]  N. Bianchi,et al.  Design considerations for fractional-slot winding configurations of synchronous machines , 2006, IEEE Transactions on Industry Applications.

[10]  F. Fiorillo,et al.  An improved approach to power losses in magnetic laminations under nonsinusoidal induction waveform , 1990 .

[11]  Nesimi Ertugrul,et al.  Iron loss reduction in an interior PM automotive alternator , 2005 .

[12]  G. Jewell,et al.  Prediction and measurement of core losses in a high-speed switched-reluctance Machine , 2005, IEEE Transactions on Magnetics.

[13]  N. Bianchi,et al.  A General Approach to Determine the Rotor Losses in Three-Phase Fractional-Slot PM Machines , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[14]  Z. Zhu,et al.  Eddy-current loss in the rotor magnets of permanent-magnet brushless machines having a fractional number of slots per pole , 2005, IEEE Transactions on Magnetics.