Low-Cost Microfabrication Tool Box

Microsystems are key enabling technologies, with applications found in almost every industrial field, including in vitro diagnostic, energy harvesting, automotive, telecommunication, drug screening, etc. Microsystems, such as microsensors and actuators, are typically made up of components below 1000 microns in size that can be manufactured at low unit cost through mass-production. Yet, their development for commercial or educational purposes has typically been limited to specialized laboratories in upper-income countries due to the initial investment costs associated with the microfabrication equipment and processes. However, recent technological advances have enabled the development of low-cost microfabrication tools. In this paper, we describe a range of low-cost approaches and equipment (below £1000), developed or adapted and implemented in our laboratories. We describe processes including photolithography, micromilling, 3D printing, xurography and screen-printing used for the microfabrication of structural and functional materials. The processes that can be used to shape a range of materials with sub-millimetre feature sizes are demonstrated here in the context of lab-on-chips, but they can be adapted for other applications. We anticipate that this paper, which will enable researchers to build a low-cost microfabrication toolbox in a wide range of settings, will spark a new interest in microsystems.

[1]  N. Burroughs,et al.  Kinesin expands and stabilises the GDP-microtubule lattice , 2018, Nature Nanotechnology.

[2]  Mohammad Khaja Nazeeruddin,et al.  Fabrication of screen‐printing pastes from TiO2 powders for dye‐sensitised solar cells , 2007 .

[3]  Paolo Arosio,et al.  Microfluidics for Protein Biophysics. , 2017, Journal of molecular biology.

[4]  G. Whitesides,et al.  Soft Lithography. , 1998, Angewandte Chemie.

[5]  C. Barrett Silicon Valley, What Next? , 1993 .

[6]  Leandro Lorenzelli,et al.  Technologies for Printing Sensors and Electronics Over Large Flexible Substrates: A Review , 2015, IEEE Sensors Journal.

[7]  Phil Stephens,et al.  Simple and Versatile 3D Printed Microfluidics Using Fused Filament Fabrication , 2016, PloS one.

[8]  Michel Wautelet,et al.  Scaling laws in the macro-, micro- and nanoworlds , 2001 .

[9]  M. Madou Fundamentals of microfabrication : the science of miniaturization , 2002 .

[10]  Rodrigo Martinez-Duarte,et al.  A study on the limits and advantages of using a desktop cutter plotter to fabricate microfluidic networks , 2015 .

[11]  Donald E. Ingber,et al.  Non-invasive sensing of transepithelial barrier function and tissue differentiation in organs-on-chips using impedance spectroscopy. , 2019, Lab on a chip.

[12]  E. Yıldırım,et al.  Investigation on replication of microfluidic channels by hot embossing , 2017 .

[13]  Brittain,et al.  Prototyping of masks, masters, and stamps/molds for soft lithography using an office printer and photographic reduction , 2000, Analytical chemistry.

[14]  Svetan Ratchev,et al.  Effects of micro-milling conditions on the cutting forces and process stability , 2013 .

[15]  G. Whitesides,et al.  Rapid Prototyping of Microfluidic Systems in Poly(dimethylsiloxane). , 1998, Analytical chemistry.

[16]  Lucie Syrová,et al.  A screen-printed flexible flow sensor , 2017 .

[17]  C. Dobson,et al.  Microfluidic deposition for resolving single-molecule protein architecture and heterogeneity , 2018, Nature Communications.

[18]  P. Bhattacharyya,et al.  Technological Journey Towards Reliable Microheater Development for MEMS Gas Sensors: A Review , 2014, IEEE Transactions on Device and Materials Reliability.

[19]  Joseph Wang,et al.  A wearable chemical–electrophysiological hybrid biosensing system for real-time health and fitness monitoring , 2016, Nature Communications.

[20]  T. Knowles,et al.  Microfluidic devices fabricated using fast wafer-scale LED-lithography patterning. , 2017, Biomicrofluidics.

[21]  David J Beebe,et al.  Micromilling: a method for ultra-rapid prototyping of plastic microfluidic devices. , 2015, Lab on a chip.

[22]  J. Bryzek,et al.  Micromachines on the march , 1994, IEEE Spectrum.

[23]  Michael E. Cato,et al.  Cutting edge microfluidics: Xurography and a microwave , 2019, Sensors and Actuators B: Chemical.

[24]  George M Whitesides,et al.  Rapid fabrication of pressure-driven open-channel microfluidic devices in omniphobic R(F) paper. , 2013, Lab on a chip.

[25]  M. Dong,et al.  Resolving protein mixtures using microfluidic diffusional sizing combined with synchrotron radiation circular dichroism. , 2018, Lab on a chip.

[26]  Gianluca Percoco,et al.  Extrusion-Based 3D Printing of Microfluidic Devices for Chemical and Biomedical Applications: A Topical Review , 2018, Micromachines.

[27]  S. Quake,et al.  Microfluidics: Fluid physics at the nanoliter scale , 2005 .

[28]  Geok Soon Hong,et al.  A dynamic model for current-based nozzle condition monitoring in fused deposition modelling , 2019, Progress in Additive Manufacturing.

[29]  Jonathan P. Metters,et al.  New directions in screen printed electroanalytical sensors: an overview of recent developments. , 2011, The Analyst.

[30]  J. Aurich,et al.  Micromachining of PMMA—manufacturing of burr-free structures with single-edge ultra-small micro end mills , 2018 .

[31]  A. Woolley,et al.  Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels. , 2017, Lab on a chip.