Bidirectional Bend Sensor Employing a Microfiber-Assisted U-Shaped Fabry-Perot Cavity

A bidirectional bend sensor based on U-shaped Fabry-Perot interferometer (UFPI) is experimentally demonstrated. The UFPI is constructed by eccentrically splicing a section of microfiber between two cleaved standard single mode fiber end faces serving as mirrors. A preliminary theoretic analysis of bending response of UFPI is presented. The bend and temperature sensing properties are measured. The theoretical and experimental investigation demonstrates the bending direction discrimination and the monotonous sensing characteristic in a single direction along or opposite to the cavity opening direction. The proposed bend sensor with more compact (∼105 μm in length) and easier fabrication presents a high contrast of the interferometer fringes and low temperature sensitivity of 1.21 × 10 −3 nm/°C.

[1]  Tao Wei,et al.  Miniaturized fiber inline Fabry-Perot interferometer fabricated with a femtosecond laser. , 2008, Optics letters.

[2]  J S Sirkis,et al.  In-line fiber étalon for strain measurement. , 1993, Optics letters.

[3]  Li Wang,et al.  Bending Vector Sensor Based on a Sector-Shaped Long-Period Grating , 2015, IEEE Photonics Technology Letters.

[4]  Jing Zhao,et al.  Asymmetrical in-fiber Mach-Zehnder interferometer for curvature measurement. , 2015, Optics express.

[5]  Wei Zhang,et al.  Modeling of spectral changes in bent fiber Bragg gratings. , 2015, Optics letters.

[6]  Shecheng Gao,et al.  Fiber-optic bending vector sensor based on Mach-Zehnder interferometer exploiting lateral-offset and up-taper. , 2012, Optics letters.

[7]  Libo Yuan,et al.  Fiber Bragg grating sensors in hollow single- and two-core eccentric fibers. , 2017, Optics express.

[8]  Hao Zhang,et al.  Highly Sensitive In-Fiber Refractive Index Sensor Based on Down-Bitaper Seeded Up-Bitaper Pair , 2012, IEEE Photonics Technology Letters.

[9]  Y. Rao,et al.  Microbubble based fiber-optic Fabry-Perot interferometer formed by fusion splicing single-mode fibers for strain measurement. , 2012, Applied optics.

[10]  Weigang Zhang,et al.  Microfiber-Enabled In-line Fabry–Pérot Interferometer for High-Sensitive Force and Refractive Index Sensing , 2014, Journal of Lightwave Technology.

[11]  Qian Tian,et al.  Extrinsic Fabry-Perot interferometric optical fiber hydrogen detection system. , 2010, Applied optics.

[12]  Hao Zhang,et al.  Two-dimensional bending vector sensing based on spatial cascaded orthogonal long period fiber. , 2012, Optics express.

[13]  Jing Zhao,et al.  High-sensitivity strain sensor based on in-fiber rectangular air bubble , 2015, Scientific Reports.

[14]  Yajun Jiang,et al.  Bend measurement using an etched fiber incorporating a fiber Bragg grating. , 2013, Optics letters.

[15]  Fang Liu,et al.  Bend-insensitive long period fiber grating-based high temperature sensor , 2015 .

[16]  Zhengliang Hu,et al.  Extrinsic Fabry–Pérot Underwater Acoustic Sensor Based on Micromachined Center-Embossed Diaphragm , 2014, Journal of Lightwave Technology.

[17]  J. Villatoro,et al.  Spheroidal Fabry-Perot microcavities in optical fibers for high-sensitivity sensing. , 2012, Optics express.

[18]  C. Liao,et al.  Optical fiber Fabry-Perot interferometer cavity fabricated by femtosecond laser micromachining and fusion splicing for refractive index sensing. , 2012, Optics express.

[19]  Fiber Fabry-Perot interferometer with controllable temperature sensitivity. , 2015, Optics letters.

[20]  Ying Wang,et al.  Temperature-insensitive refractive index sensing by use of micro Fabry-Pérot cavity based on simplified hollow-core photonic crystal fiber. , 2013, Optics letters.

[21]  R O Claus,et al.  Quadrature phase-shifted, extrinsic Fabry-Perot optical fiber sensors. , 1991, Optics letters.

[22]  Russell H. Taylor,et al.  Miniature fiber-optic force sensor based on low-coherence Fabry-Pérot interferometry for vitreoretinal microsurgery , 2012, Biomedical optics express.

[23]  O. Frazão,et al.  Fabry-Perot cavity based on silica tube for strain sensing at high temperatures. , 2015, Optics express.

[24]  Shizhuo Yin,et al.  Multiple parameter vector bending and high-temperature sensors based on asymmetric multimode fiber Bragg gratings inscribed by an infrared femtosecond laser. , 2006, Optics letters.

[25]  Yan Zhang,et al.  Miniature fiber-optic multicavity Fabry-Perot interferometric biosensor. , 2005, Optics letters.

[26]  Fang Liu,et al.  Compact Long Period Fiber Grating Based on Periodic Micro-Core-Offset , 2013, IEEE Photonics Technology Letters.