Improving the resistance to sliding contact damage of zirconia using elastic gradients.

Zirconia-based ceramics with high strength have been identified as a material of choice for sliding components in a variety of biomedical and engineering applications. Despite the high flexural strength, zirconia prostheses are still vulnerable to wear and surface damage. We hypothesize that such tribological damage may be substantially mitigated by an engineered grading of elastic modulus at the ceramic surface. In this study, graded structures were fabricated by infiltrating glass into the top and bottom surfaces of zirconia plates, with resulting diminished modulus in the outer surfaces. The plates were then subjected to frictional sliding tests using a hard spherical indenter. Compared with noninfiltrated controls, infiltrated specimens showed a significant increase in the fracture loads, by over a factor of 3. The increase in the sliding contact resistance is attributed to the diminishing tensile stresses at the graded lower modulus surface. The results confirm that suitably graded structures can be highly beneficial in the design of next-generation orthopedic and dental prostheses.

[1]  Yu Zhang,et al.  Graded structures for damage resistant and aesthetic all-ceramic restorations. , 2009, Dental materials : official publication of the Academy of Dental Materials.

[2]  D. E. Roberts,et al.  Effect of sliding friction forces on the strength of brittle materials , 1984 .

[3]  J. Kim,et al.  Damage Maps for Layered Ceramics under Simulated Mastication , 2008, Journal of dental research.

[4]  I. Denry,et al.  Stabilized zirconia as a structural ceramic: an overview. , 2008, Dental materials : official publication of the Academy of Dental Materials.

[5]  H. Skinner,et al.  Concerns about ceramics in THA. , 2004, Clinical orthopaedics and related research.

[6]  Hertz.  On the Contact of Elastic Solids , 1882 .

[7]  Joo Hyung Kim,et al.  Fatigue Damage in Ceramic Coatings From Cyclic Contact Loading With a Tangential Component , 2007 .

[8]  R. Jinnah,et al.  Review on ceramic-on-ceramic total hip arthroplasty. , 2008, Journal of surgical orthopaedic advances.

[9]  G. Willmann.  Ceramics for total hip replacement--what a surgeon should know. , 1998, Orthopedics.

[10]  Irena Sailer,et al.  A systematic review of the survival and complication rates of all‐ceramic and metal–ceramic reconstructions after an observation period of at least 3 years. Part II: fixed dental prostheses. , 2007 .

[11]  H. Hertz.  Ueber die Berührung fester elastischer Körper. , 1882 .

[12]  B. Lawn.  Partial cone crack formation in a brittle material loaded with a sliding spherical indenter , 1967, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[13]  Yu Zhang,et al.  Optimization of ceramic strength using elastic gradients. , 2009, Acta materialia.

[14]  V. Thompson,et al.  Sliding Contact Fatigue Damage in Layered Ceramic Structures , 2007, Journal of dental research.

[15]  A. Giannakopoulos,et al.  Gradients in elastic modulus for improved contact-damage resistance. Part I: The silicon nitride–oxynitride glass system , 2001 .

[16]  M. Janal,et al.  Damage Maps of Veneered Zirconia under Simulated Mastication , 2008, Journal of dental research.

[17]  B. Lawn,et al.  Overview: Damage in brittle layer structures from concentrated loads , 2002 .

[18]  Matteo Bruzzone,et al.  The squeaking hip: a phenomenon of ceramic-on-ceramic total hip arthroplasty. , 2009, The Journal of bone and joint surgery. American volume.

[19]  Subra Suresh,et al.  Hertzian-crack suppression in ceramics with elastic-modulus-graded surfaces , 2005 .

[20]  N. Heussen,et al.  Clinical behavior of zirconia-based fixed partial dentures made of DC-Zirkon: 3-year results. , 2008, The International journal of prosthodontics.

[21]  Irena Sailer,et al.  Five-year clinical results of zirconia frameworks for posterior fixed partial dentures. , 2007, The International journal of prosthodontics.

[22]  R. T. Pascoe,et al.  Ceramic steel? , 1975, Nature.

[23]  W. Hirst,et al.  RESEARCH NOTES: Brittle fracture of glass under normal and sliding loads , 1969 .

[24]  Thorkild Karring,et al.  Vertical ridge augmentation with guided bone regeneration in association with dental implants: an experimental study in dogs. , 2007, Clinical oral implants research.

[25]  S. Suresh,et al.  Graded Materials for Resistance to Contact Deformation and Damage , 2001, Science.

[26]  J. Chevalier,et al.  What future for zirconia as a biomaterial? , 2006, Biomaterials.

[27]  B. Lawn,et al.  Partial cone crack formation in a brittle material loaded with a sliding indenter , 1967 .

[28]  P. Marquis,et al.  Are adhesive technologies needed to support ceramics? An assessment of the current evidence. , 2002, The journal of adhesive dentistry.

[29]  F. Kummer,et al.  Hard bearing surfaces in total hip arthroplasty. , 1998, American journal of orthopedics.

[30]  Subra Suresh,et al.  Engineering the resistance to sliding-contact damage through controlled gradients in elastic properties at contact surfaces , 1999 .

[31]  A. Giannakopoulos,et al.  Indentation of solids with gradients in elastic properties: Part I. Point force , 1997 .

[32]  C. Piconi,et al.  Zirconia as a ceramic biomaterial. , 1999, Biomaterials.

[33]  V. Thompson,et al.  Fracture of Porcelain-veneered Structures in Fatigue , 2007, Journal of dental research.

[34]  A. Giannakopoulos,et al.  Indentation of solids with gradients in elastic properties: Part II. Axisymmetric indentors , 1997 .

[35]  L. E. Goodman,et al.  The Stress Field Created by a Circular Sliding Contact , 1966 .

[36]  B. Lawn,et al.  Graded Structures for All-ceramic Restorations , 2010, Journal of dental research.