Tubular Membrane Cathodes for Scalable Power Generation in Microbial Fuel Cells

One of the greatest challenges for using microbial fuel cells (MFCs) for wastewater treatment is creating a scalable architecture that provides large surface areas for oxygen reduction at the cathode and bacteria growth on the anode. We demonstrate here a scalable cathode concept by showing that a tubular ultrafiltration membrane with a conductive graphite coating and a nonprecious metal catalyst (CoTMPP) can be used to produce power in an MFC. Using a carbon paper anode (surface area Aan ) 7 cm2, surface area per reactor volume Aan,s ) 25 m2/m3), an MFC with two 3-cm tube cathodes (Acat ) 27 cm2, Acat,s ) 84 m2/m3) generated up to 8.8 W/m3 (403 mW/m2) using glucose [0.8 g/L in a 50 mM phosphate buffer solution (PBS)], which was only slightly less than that produced using a carbon paper cathode with a Pt catalyst (9.9 W/m3, 394 mW/m2; Acat ) 7 cm2, Acat,s ) 25 m2/m3). Coulombic efficiencies (CEs) with carbon paper anodes were 25-40% with tube cathodes (CoTMPP), compared to 7-19% with a carbon paper cathode. When a high-surface-area graphite brush anode was used (Aan ) 2235 cm2, Aan,s ) 7700 m2/m3) with two tube cathodes placed inside the reactor (Acat ) 27 cm2, Acat,s ) 93 m2/m3), the MFC produced 17.7 W/m3 with a CE ) 70-74% (200 mM PBS). Further increases in the surface area of the tube cathodes to 54 cm2 (120 m2/m3) increased the total power output (from 0.51 to 0.83 mW), but the increase in volume resulted in a constant volumetric power density (∼18 W/m3). These results demonstrate that an MFC design using tubular cathodes coated with nonprecious metal catalysts, and brush anodes, is a promising architecture that is intrinsically scalable for creating larger systems. Further increases in power output will be possible through the development of cathodes with lower internal resistances.

[1]  E. E. L O G A N,et al.  Power Generation Using Different Cation, Anion, and Ultrafiltration Membranes in Microbial Fuel Cells , 2022 .

[2]  E. E. L O G A N,et al.  Electricity Generation Using an Air-Cathode Single Chamber Microbial Fuel Cell in the Presence and Absence of a Proton Exchange Membrane , 2022 .

[3]  Bruce E. Logan,et al.  Electricity Production from Steam-Exploded Corn Stover Biomass , 2006 .

[4]  E. E. L O G A N,et al.  Production of Electricity during Wastewater Treatment Using a Single Chamber Microbial Fuel Cell , 2022 .

[5]  Bruce E. Logan,et al.  AMMONIA TREATMENT OF CARBON CLOTH ANODES TO ENHANCE POWER GENERATION OF MICROBIAL FUEL CELLS , 2007 .

[6]  G. Gil,et al.  Operational parameters affecting the performannce of a mediator-less microbial fuel cell. , 2003, Biosensors & bioelectronics.

[7]  E. E. L O G A N,et al.  Power Densities Using Different Cathode Catalysts (Pt and CoTMPP) and Polymer Binders (Nafion and PTFE) in Single Chamber Microbial Fuel Cells , 2022 .

[8]  Received for review , 1975 .

[9]  E. E. L O G A N,et al.  Cathode Performance as a Factor in Electricity Generation in Microbial Fuel Cells , 2022 .

[10]  Hong Liu,et al.  Power generation in fed-batch microbial fuel cells as a function of ionic strength, temperature, and reactor configuration. , 2005, Environmental science & technology.

[11]  Bruce E. Logan,et al.  Evaluation of procedures to acclimate a microbial fuel cell for electricity production , 2005, Applied Microbiology and Biotechnology.

[12]  B. Logan,et al.  Graphite fiber brush anodes for increased power production in air-cathode microbial fuel cells. , 2007, Environmental science & technology.

[13]  Uwe Schröder,et al.  Application of pyrolysed iron(II) phthalocyanine and CoTMPP based oxygen reduction catalysts as cathode materials in microbial fuel cells , 2005 .

[14]  Bruce E. Logan,et al.  Increased performance of single-chamber microbial fuel cells using an improved cathode structure , 2006 .

[15]  E. E. L O G A N,et al.  Increased Power Generation in a Continuous Flow MFC with Advective Flow through the Porous Anode and Reduced Electrode Spacing , 2022 .

[16]  D. Lovley,et al.  Electricity generation by direct oxidation of glucose in mediatorless microbial fuel cells , 2003, Nature Biotechnology.

[17]  Willy Verstraete,et al.  Tubular microbial fuel cells for efficient electricity generation. , 2005, Environmental science & technology.

[18]  Zhen He,et al.  An upflow microbial fuel cell with an interior cathode: assessment of the internal resistance by impedance spectroscopy. , 2006, Environmental science & technology.

[19]  D. Lowy,et al.  Harvesting energy from the marine sediment-water interface II. Kinetic activity of anode materials. , 2006, Biosensors & bioelectronics.

[20]  W. Verstraete,et al.  Continuous electricity generation at high voltages and currents using stacked microbial fuel cells. , 2006, Environmental science & technology.

[21]  Zhen He,et al.  Electricity generation from artificial wastewater using an upflow microbial fuel cell. , 2005, Environmental science & technology.

[22]  Haluk Beyenal,et al.  Microbial fuel cell using anaerobic respiration as an anodic reaction and biomineralized manganese as a cathodic reactant. , 2005, Environmental science & technology.

[23]  B. Min,et al.  Electricity generation using membrane and salt bridge microbial fuel cells. , 2005, Water research.

[24]  Sangeun Oh,et al.  Proton exchange membrane and electrode surface areas as factors that affect power generation in microbial fuel cells , 2006, Applied microbiology and biotechnology.

[25]  D. Park,et al.  Improved fuel cell and electrode designs for producing electricity from microbial degradation. , 2003, Biotechnology and bioengineering.

[26]  F. Harnisch,et al.  Challenges and constraints of using oxygen cathodes in microbial fuel cells. , 2006, Environmental science & technology.

[27]  李翠霞.  Environmental science & technology. , 1970, Analytical chemistry.

[28]  W. Verstraete,et al.  A microbial fuel cell capable of converting glucose to electricity at high rate and efficiency , 2004, Biotechnology Letters.