Electrothermally activated paraffin microactuators

A new family of electrothermally activated microactuators that can provide both large displacements and forces, are simple to fabricate, and are easily integrated with a large variety of microelectronic and microfluidic components are presented. The actuators use the high volumetric expansion of a sealed, surface micromachined patch of paraffin heated near its melting point to deform a sealing diaphragm. Two types of actuators have been fabricated using a simple three mask fabrication process. The first device structure consists of a 9 /spl mu/m thick circularly patterned paraffin layer ranging in diameter from 400 to 800 /spl mu/m all covered with a 4-/spl mu/m-thick metallized p-xylylene sealing diaphragm. All fabricated devices produced a 2.7-/spl mu/m-peak center deflection, consistent with a simple first order theory. The second actuator structure uses a constrained volume reservoir that magnifies the diaphragm deflection producing consistently 3.2 /spl mu/m center diaphragm deflection with a 3-/spl mu/m-thick paraffin actuation layer. Microactuators were constructed on both glass and silicon substrates. The actuators fabricated on glass substrates used between 50-200 mW of electrical power with response times ranging between 30-50 ms. The response time for silicon devices was much faster (3-5 ms) at the expense of a larger electrical power (500-2000 mW).

[1]  Y. Jaluria,et al.  An Introduction to Heat Transfer , 1950 .

[2]  G. S. Parks,et al.  Selected Values of Physical and Thermodynamic Properties of Hydrocarbons and Related Compounds. , 1954 .

[3]  J. Mahony.  Heat transfer at small Grashof numbers , 1957, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[4]  M. Volkenstein,et al.  Statistical mechanics of chain molecules , 1969 .

[5]  M. White,et al.  The structure and properties of evaporated polyethylene thin films , 1970 .

[6]  C. L. Choy,et al.  Thermal conductivity of polymers , 1977 .

[7]  A. Ugural.  Stresses in plates and shells , 1981 .

[8]  B. Wunderlich,et al.  Analysis of the contribution of skeletal vibrations to the heat capacity of linear macromolecules in the solid state , 1982 .

[9]  B. Wunderlich,et al.  Calculation of the heat capacity of linear macromolecules from theta-temperatures and group vibrations , 1983 .

[10]  W. Riethmuller,et al.  Thermally excited silicon microactuators , 1988 .

[11]  William C. Tang,et al.  Laterally driven polysilicon resonant microstructures , 1989, IEEE Micro Electro Mechanical Systems, , Proceedings, 'An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots'.

[12]  B. Wunderlich,et al.  Heat capacities of paraffins and polyethylene , 1991 .

[13]  N. Okui,et al.  Molecular orientation behavior of paraffin thin films made by vapor deposition , 1991 .

[14]  S. Hirose,et al.  Mathematical model and experimental verification of shape memory alloy for designing micro actuator , 1991, [1991] Proceedings. IEEE Micro Electro Mechanical Systems.

[15]  Scott Tibbitts.  High-output paraffin linear motors: utilization in adaptive systems , 1992, Other Conferences.

[16]  I︠u︡. K. Godovskiĭ.  Thermophysical properties of polymers , 1992 .

[17]  K. W. Childs.  Heating 7. 2 user's manual , 1993 .

[18]  B. Jang,et al.  Thermally- and Phase Transformation-Induced Volume Changes of Polymers for Actuator Applications , 1994 .

[19]  Z. J. Zhang,et al.  Actuating power capacities of polymers, gels, and composites for use in smart materials systems , 1995, Smart Structures.

[20]  D. J. Walsh,et al.  Standard Pressure Volume Temperature Data for Polymers , 1995 .

[21]  Kensall D. Wise,et al.  Thermally driven phase-change microactuation , 1995 .

[22]  Arthur H. Heuer,et al.  TiNi (shape memory) films silicon for MEMS applications , 1995 .

[23]  M. A. Northrup,et al.  Thin Film Shape Memory Alloy Microactuators , 1996, Microelectromechanical Systems (MEMS).

[24]  A. Visintin.  Models of Phase Transitions , 1996 .

[25]  Kiichi Tsuchiya,et al.  A Thermal-Expansion-Type Microactuator with Paraffin as the Expansive Material (Basic Performance of a Prototype Linear Actuator) , 1997 .

[26]  David E. Dowen.  Design and implementation of a paraffin-based micropositioning actuator , 1997, Optics & Photonics.

[27]  A. Buzulutskov,et al.  REMOVABLE ORGANIC PROTECTIVE COATING FOR ALKALI-ANTIMONIDE PHOTOCATHODES , 1998 .

[28]  Henry Guckel,et al.  Closed loop controlled, large throw, magnetic linear microactuator with 1000 /spl mu/m structural height , 1998, Proceedings MEMS 98. IEEE. Eleventh Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Systems (Cat. No.98CH36176.

[29]  C. Mastrangelo,et al.  SIMPLE, HIGH ACTUATION POWER, THERMALLY ACTIVATED PARAFFIN MICROACTUATOR , 1999 .

[30]  Carlos H. Mastrangelo,et al.  Paraffin actuated surface micromachined valves , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[31]  E. Carlen.  Electrothermally actuated polymer microvalves. , 2001 .