Experimental investigation on laser transmission welding of PMMA to ABS via response surface modeling

Abstract In this paper, an experimental investigation on diode laser transmission welding of dissimilar thermoplastics between PMMA (polymethyl methacrylate) and ABS (acrylonitrile butadiene styrene) has been carried out. The effect of the laser welding parameters such as laser power, welding speed, stand-off distance and clamp pressure on weld strength and weld width is investigated using response surface methodology (RSM). Planned experiments and subsequent analyses are carried out to develop the mathematical models to establish the correlation between the process parameters and the responses. The adequacy of the developed models is tested using the sequential F -test, lack-of-fit test and the analysis-of-variance (ANOVA) technique. A numerical multi-objective simultaneous optimization technique, in which the RSM is incorporated, is used to find the optimum solutions, according to the desired optimization criteria. In addition to that, a graphical optimization technique is, also implemented which allow identifying a region in the graphic where optimal conditions lay on.

[1]  G. Derringer,et al.  Simultaneous Optimization of Several Response Variables , 1980 .

[2]  G. Zak,et al.  Effect of carbon black on light transmission in laser welding of thermoplastics , 2011 .

[3]  Dan Watt,et al.  Welding thermoplastic elastomers to polypropylene with a diode laser , 2002 .

[4]  Ulrich Russek,et al.  Advances in laser beam welding of polymers and automotive prospects , 2003 .

[5]  Val A. Kagan,et al.  Relationship between Optical Properties and Optimized Processing Parameters for through-Transmission Laser Welding of Thermoplastics , 2004 .

[6]  D. Mark Douglass,et al.  Laser welding of polyolefin elastomers to thermoplastic polyolefin , 2003 .

[7]  Bappa Acherjee,et al.  Prediction of weld strength and seam width for laser transmission welding of thermoplastic using response surface methodology , 2009 .

[8]  Marianna Kontopoulou,et al.  Contour Laser – Laser-Transmission Welding of Glass Reinforced Nylon 6 , 2006 .

[9]  R. Poprawe,et al.  Laser transmission joining in microtechnology , 2006 .

[10]  Val A. Kagan,et al.  Forward to Better Understanding of Optical Characterization and Development of Colored Polyamides for the Infra-Red/Laser Welding: Part I - Efficiency of Polyamides for Infra-Red Welding , 2003 .

[11]  M. Hashmi,et al.  Effect of laser welding parameters on the heat input and weld-bead profile , 2005 .

[12]  A. Olabi,et al.  Weld-bead profile and costs optimisation of the CO2 dissimilar laser welding process of low carbon steel and austenitic steel AISI316 , 2011 .