Light-induced degradation of the P3HT-based solar cells active layer

Abstract We report on the effects of long-term artificial accelerated ageing on the active layer of organic solar cells in the absence of oxygen. The samples were composed of a bulk heterojunction formed by poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61 butyric acid methyl ester (PCBM) deposited on poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). First, a set of experiments was performed to study the modifications resulting from prolonged exposure to UV–vis light. A gradual decrease in absorbance was recorded, and TEM results clearly indicated that the initial morphology was unstable upon long irradiation times. Second, we revealed that the annealing temperature of PEDOT:PSS strongly influenced the degradation of the active layer. Indeed, an increase in the PEDOT:PSS annealing temperature resulted in an important improvement in stability. Third, a comparison was made between different active layers obtained by changing the P3HT type, polymer:fullerene weight ratio and solvent nature. As expected, the polymer:fullerene weight ratio was shown to significantly impact the degradation kinetics. The ageing effects on the photovoltaic properties were then explored, and extrapolation of the data to outdoor exposure is also discussed.

[1]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[2]  Kion Norrman,et al.  Water-induced degradation of polymer solar cells studied by H2(18)O labeling. , 2009, ACS applied materials & interfaces.

[3]  Shijun Jia,et al.  Polymer–Fullerene Bulk‐Heterojunction Solar Cells , 2009, Advanced materials.

[4]  Xiaoniu Yang,et al.  Toward High-Performance Polymer Solar Cells: The Importance of Morphology Control , 2007 .

[5]  Jean M. J. Fréchet,et al.  Amphiphilic Diblock Copolymer Compatibilizers and Their Effect on the Morphology and Performance of Polythiophene:Fullerene Solar Cells , 2006 .

[6]  Andreas Gombert,et al.  Photonics for Solar Energy Systems IV , 2010 .

[7]  Suren A. Gevorgyan,et al.  A setup for studying stability and degradation of polymer solar cells , 2008 .

[8]  I. Samuel,et al.  Exciton Diffusion Measurements in Poly(3‐hexylthiophene) , 2008 .

[9]  Niyazi Serdar Sariciftci,et al.  Morphology of polymer/fullerene bulk heterojunction solar cells , 2006 .

[10]  F. Krebs,et al.  Lifetimes of organic photovoltaics: photochemistry, atmosphere effects and barrier layers in ITO-MEHPPV:PCBM-aluminium devices , 2005 .

[11]  F. Krebs,et al.  Lifetimes of organic photovoltaics: Combining chemical and physical characterisation techniques to study degradation mechanisms , 2006 .

[12]  Christoph J. Brabec,et al.  Organic photovoltaics : concepts and realization , 2003 .

[13]  Carole Sentein,et al.  Accelerated lifetime measurements of P3HT:PCBM solar cells , 2006 .

[14]  Agnès Rivaton,et al.  The mechanism of photo- and thermooxidation of poly(3-hexylthiophene) (P3HT) reconsidered , 2009 .

[15]  Jean Manca,et al.  Phase diagram of P3HT/PCBM blends and its implication for the stability of morphology. , 2009, The journal of physical chemistry. B.

[16]  M. Manceau,et al.  Effects of long-term UV-visible light irradiation in the absence of oxygen on P3HT and P3HT:PCBM blend , 2010 .

[17]  Etienne Goovaerts,et al.  Effect of temperature on the morphological and photovoltaic stability of bulk heterojunction polymer: fullerene solar cells , 2008 .

[18]  Shijun Jia,et al.  Large-area organic photovoltaic module—Fabrication and performance , 2009 .

[19]  Xiaoniu Yang,et al.  Morphology and Thermal Stability of the Active Layer in Poly(p-phenylenevinylene)/Methanofullerene Plastic Photovoltaic Devices , 2004 .

[20]  Xiaoniu Yang,et al.  Nanoscale morphology of high-performance polymer solar cells. , 2005, Nano letters.

[21]  Christoph J. Brabec,et al.  Flexible organic P3HT:PCBM bulk-heterojunction modules with more than 1 year outdoor lifetime , 2008 .

[22]  H. Sirringhaus,et al.  Effect of interchain interactions on the absorption and emission of poly(3-hexylthiophene) , 2003 .

[23]  Valentin D. Mihailetchi,et al.  Charge Transport and Photocurrent Generation in Poly(3‐hexylthiophene): Methanofullerene Bulk‐Heterojunction Solar Cells , 2006 .

[24]  N. S. Sariciftci,et al.  Conjugated polymer-based organic solar cells. , 2007, Chemical reviews.

[25]  Roar R. Søndergaard,et al.  Advanced materials and processes for polymer solar cell devices , 2010 .

[26]  J. D’Haen,et al.  Tuning the Dimensions of C60‐Based Needlelike Crystals in Blended Thin Films , 2006 .

[27]  Frederik C. Krebs,et al.  Encapsulation of polymer photovoltaic prototypes , 2006 .

[28]  Garry Rumbles,et al.  Pathways for the degradation of organic photovoltaic P3HT:PCBM based devices , 2008 .

[29]  B. Kippelen.  Organic Photovoltaics , 2007, 2007 Conference on Lasers and Electro-Optics (CLEO).

[30]  J. Fréchet,et al.  Polymer-fullerene composite solar cells. , 2008, Angewandte Chemie.

[31]  D. Bradley,et al.  Degradation of organic solar cells due to air exposure , 2006 .

[32]  Stéphane Cros,et al.  Impact of light on organic solar cells: evolution of the chemical structure, morphology, and photophysical properties of the active layer , 2008, Photonics Europe.

[33]  U. Würfel,et al.  Longterm stability of efficient inverted P3HT:PCBM solar cells , 2009 .

[34]  N. S. Sariciftci,et al.  A review of charge transport and recombination in polymer/fullerene organic solar cells , 2007 .

[35]  Christoph J. Brabec,et al.  The impact of water vapor transmission rate on the lifetime of flexible polymer solar cells , 2008 .

[36]  Yang Yang,et al.  Polymer solar cells with enhanced open-circuit voltage and efficiency , 2009 .

[37]  S. Beaupré,et al.  Solar‐Energy Production and Energy‐Efficient Lighting: Photovoltaic Devices and White‐Light‐Emitting Diodes Using Poly(2,7‐fluorene), Poly(2,7‐carbazole), and Poly(2,7‐dibenzosilole) Derivatives , 2010, Advanced materials.

[38]  Nelson E. Coates,et al.  Bulk heterojunction solar cells with internal quantum efficiency approaching 100 , 2009 .