A Self-Powered System for Large-Scale Strain Sensing by Combining CMOS ICs With Large-Area Electronics

We present a 2nd-generation system for high-resolution structural-health monitoring of bridges and buildings. The system combines large-area electronics (LAE) and CMOS ICs via scalable interfaces based on inductive and capacitive coupling. This enables architectures where the functional strengths of both technologies can be leveraged to enable large-scale strain sensing scalable to cm resolution yet over large-area sheets. The system consists of three subsystems: (1) a power-management subsystem, where LAE is leveraged for solar-power harvesting, and CMOS is leveraged for power conversion and regulation; (2) a sensing subsystem, where LAE is leveraged for dense strain sensing, and CMOS is leveraged for multi-sensor acquisition; and (3) a communication subsystem, where LAE is leveraged for long-range interconnects, and CMOS is leveraged for low-power transceivers. The power-management subsystem achieves 30% efficiency for DC-AC power inversion and inductive power delivery to the CMOS IC and 80.5% overall efficiency for generating three voltages via DC-DC converters. The sensing subsystem has a readout noise level of 23 μStrainRMS (141 μStrainRMS including sensor noise), at an energy/meas. of 148 nJ and 286 nJ for readout and sensor-accessing control, respectively. The communication subsystem achieves an energy/bit of 14.6 pJ/4.3 pJ (Tx/Rx) at a distance of 7.5 m and a data rate of 2 Mb/s.

[1]  Sigurd Wagner,et al.  Highly stable amorphous-silicon thin-film transistors on clear plastic , 2008 .

[2]  Justin Dale Doornink.  Monitoring the structural condition of fracture-critical bridges using fiber optic technology , 2006 .

[3]  A. Nathan,et al.  Amorphous silicon thin film transistor circuit integration for organic LED displays on glass and plastic , 2004, IEEE Journal of Solid-State Circuits.

[4]  Sigurd Wagner,et al.  High-resolution sensing sheet for structural-health monitoring via scalable interfacing of flexible electronics with high-performance ICs , 2012, 2012 Symposium on VLSI Circuits (VLSIC).

[5]  Sigurd Wagner,et al.  Large-Scale Sensing System Combining Large-Area Electronics and CMOS ICs for Structural-Health Monitoring , 2014, IEEE Journal of Solid-State Circuits.

[6]  Yingzhe Hu,et al.  Device optimization for integration of thin-film power electronics with thin-film energy-harvesting devices to create power-delivery systems on plastic sheets , 2012, 2012 International Electron Devices Meeting.

[7]  T. Jackson,et al.  Flexible substrate micro-crystalline silicon and gated amorphous silicon strain sensors , 2006, IEEE Transactions on Electron Devices.

[8]  Sigurd Wagner,et al.  Flexible solar-energy harvesting system on plastic with thin-film LC oscillators operating above ft for inductively-coupled power delivery , 2012, Proceedings of the IEEE 2012 Custom Integrated Circuits Conference.

[9]  Hiroshi Sakai,et al.  Production technology for amorphous silicon-based flexible solar cells , 2001 .

[10]  Takao Someya,et al.  Organic Semiconductor Devices with Enhanced Field and Environmental Responses for Novel Applications , 2008 .

[11]  Naveen Verma,et al.  A fully self-powered hybrid system based on CMOS ICs and large-area electronics for large-scale strain monitoring , 2013, 2013 Symposium on VLSI Circuits.

[12]  Arthur H. M. van Roermund,et al.  An organic VCO-based ADC for quasi-static signals achieving 1LSB INL at 6b resolution , 2013, 2013 IEEE International Solid-State Circuits Conference Digest of Technical Papers.

[13]  Sigurd Wagner,et al.  Integrated all-silicon thin-film power electronics on flexible sheets for ubiquitous wireless charging stations based on solar-energy harvesting , 2012, 2012 Symposium on VLSI Circuits (VLSIC).