A readout for large arrays of microwave kinetic inductance detectors.

Microwave kinetic inductance detectors (MKIDs) are superconducting detectors capable of counting single photons and measuring their energy in the UV, optical, and near-IR. MKIDs feature intrinsic frequency domain multiplexing (FDM) at microwave frequencies, allowing the construction and readout of large arrays. Due to the microwave FDM, MKIDs do not require the complex cryogenic multiplexing electronics used for similar detectors, such as transition edge sensors, but instead transfer this complexity to room temperature electronics where they present a formidable signal processing challenge. In this paper, we describe the first successful effort to build a readout for a photon counting optical/near-IR astronomical instrument, the ARray Camera for Optical to Near-infrared Spectrophotometry. This readout is based on open source hardware developed by the Collaboration for Astronomy Signal Processing and Electronics Research. Designed principally for radio telescope backends, it is flexible enough to be used for a variety of signal processing applications.

[1]  Richard G. Lyons,et al.  Understanding Digital Signal Processing , 1996 .

[2]  David Moore,et al.  ARCHONS: a highly multiplexed superconducting optical to near-IR camera , 2010, Astronomical Telescopes + Instrumentation.

[3]  Jonas Zmuidzinas,et al.  Experimental evidence for a surface distribution of two-level systems in superconducting lithographed microwave resonators , 2008, 0802.4457.

[4]  Kent D. Irwin,et al.  Digital readouts for large microwave low-temperature detector arrays , 2006 .

[5]  J. Zmuidzinas,et al.  A WIMP Dark Matter Detector Using MKIDs , 2008 .

[6]  D. Mattis,et al.  Theory of the anomalous skin effect in normal and superconducting metals , 1958 .

[7]  K. Irwin,et al.  Superconducting multiplexer for arrays of transition edge sensors , 1999 .

[8]  G. Turin,et al.  An introduction to matched filters , 1960, IRE Trans. Inf. Theory.

[9]  Jason Glenn,et al.  MUSIC for sub/millimeter astrophysics , 2010, Astronomical Telescopes + Instrumentation.

[10]  H. Leduc,et al.  A broadband superconducting detector suitable for use in large arrays , 2003, Nature.

[11]  Adrian T. Lee,et al.  Single superconducting quantum interference device multiplexer for arrays of low-temperature sensors , 2001 .

[12]  Bruce Bumble,et al.  A superconducting focal plane array for ultraviolet, optical, and near-infrared astrophysics. , 2012, Optics express.

[13]  J. J. A. Baselmans,et al.  NIKA: A millimeter-wave kinetic inductance camera , 2010, 1004.2209.

[14]  J. Klauder,et al.  The theory and design of chirp radars , 1960 .

[15]  G. Hilton,et al.  X‐ray detection using a superconducting transition‐edge sensor microcalorimeter with electrothermal feedback , 1996 .

[16]  Andrey M. Baryshev,et al.  Fast Fourier transform spectrometer readout for large arrays of microwave kinetic inductance detectors , 2009 .

[17]  O. Bourrion,et al.  Electronics and data acquisition demonstrator for a kinetic inductance camera , 2011, 1102.1314.

[18]  Jörn Beyer,et al.  Code-division SQUID multiplexing , 2010 .