Baseline Model for the Simulation of Bubbly Flows

[1]  H. Blanch,et al.  Bubble coalescence and break‐up in air‐sparged bubble columns , 1990 .

[2]  Dirk Lucas,et al.  Transient simulation for large scale flow in bubble columns , 2015 .

[3]  P. Proulx,et al.  A full integration of a dispersion and interface closures in the standard k–ε model of turbulence , 2010 .

[4]  Eckhard Krepper,et al.  The inhomogeneous MUSIG model for the simulation of polydispersed flows , 2008 .

[5]  Eckhard Krepper,et al.  Closure models for turbulent bubbly flows: A CFD study , 2013 .

[6]  Miguel A. Galán,et al.  Influence of the lift force closures on the numerical simulation of bubble plumes in a rectangular bubble column , 2009 .

[7]  Pierre Proulx,et al.  Simulation of bubbly flows: Comparison between direct quadrature method of moments (DQMOM) and method of classes (CM) , 2010 .

[8]  A. Buffo,et al.  Modeling and simulation of turbulent polydisperse gas-liquid systems via the generalized population balance equation , 2014 .

[9]  M. Podowski On the consistency of mechanistic multidimensional modeling of gas/liquid two-phase flows , 2009 .

[10]  Mamoru Ishii,et al.  Lift force in bubbly flow systems , 2007 .

[11]  Eckhard Krepper,et al.  Bubbly flows with fixed polydispersity: Validation of a baseline closure model , 2015 .

[12]  Yassin A. Hassan,et al.  A two-equation turbulence model of turbulent bubbly flows , 2001 .

[13]  Eckhard Krepper,et al.  CFD modeling of bubble-induced turbulence , 2013 .

[14]  Gabriel Wild,et al.  Numerical simulation of multiphase flow in bubble column reactors. Influence of bubble coalescence and break-up , 2001 .

[15]  J. Converti,et al.  A model for turbulent polydisperse two-phase flow in vertical channels , 2003 .

[16]  Mandar Tabib,et al.  CFD simulation of bubble column—An analysis of interphase forces and turbulence models , 2008 .

[17]  Jinfu Wang,et al.  Population Balance Model for Gas−Liquid Flows: Influence of Bubble Coalescence and Breakup Models , 2005 .

[18]  Eckhard Krepper,et al.  Development of co-current air–water flow in a vertical pipe , 2005 .

[19]  Daniele Marchisio,et al.  On the Comparison between Population Balance Models for CFD Simulation of Bubble Columns , 2005 .

[20]  Jam Hans Kuipers,et al.  Numerical simulation of the dynamic flow behavior in a bubble column : A study of closures for turbulence and interface forces , 2006 .

[21]  M. T. Dhotre,et al.  CFD simulation of bubble column , 2010 .

[22]  G. Eigenberger,et al.  Simulation of Buoyancy Driven Bubbly Flow: Established Simplifications and Open Questions (Journal Review) , 2004 .

[23]  Hidesada Tamai,et al.  Transverse migration of single bubbles in simple shear flows , 2002 .

[24]  Antonio Delgado,et al.  Numerical investigation of the interphase forces and turbulence closure in 3D square bubble columns , 2014 .

[25]  Milorad P. Dudukovic,et al.  Numerical simulation of bubble columns flows: effect of different breakup and coalescence closures , 2005 .

[26]  Akimi Serizawa SOME REMARKS ON MECHANISMS OF PHASE DISTRIBUTION IN AN ADIABATIC BUBBLY PIPE FLOW , 2003 .

[27]  Faïçal Larachi,et al.  CFD simulation of bubble column flows: Investigations on turbulence models in RANS approach , 2009 .

[28]  Marcela K. Silva,et al.  Study of the interfacial forces and turbulence models in a bubble column , 2012, Comput. Chem. Eng..

[29]  H. Svendsen,et al.  Theoretical model for drop and bubble breakup in turbulent dispersions , 1996 .

[30]  Eckhard Krepper,et al.  Baseline closure model for dispersed bubbly flow: Bubble coalescence and breakup , 2015 .

[31]  N. Zuber,et al.  Drag coefficient and relative velocity in bubbly, droplet or particulate flows , 1979 .