论文信息 - Sensitivity Of The Performance Of Monomode Fibres To The Fabrication Conditions

Sensitivity Of The Performance Of Monomode Fibres To The Fabrication Conditions

The effects of fibre drawing tension on the optical properties of various monomode fibre designs is examined. High drawing tensions were found to give low optical loss. Grading the refractive index profile was found to reduce the drawing-induced loss considerably. Fibres with high germania content show the largest drawing effects.

Benjamin James Ainslie | K. J. Beales | D. M. Cooper | C. R. Day

[1] R. Olshansky,et al. Propagation in glass optical waveguides , 1979 .

[2] T. Miya,et al. Ultimate low-loss single-mode fibre at 1.55 μm , 1979 .

[3] J. D. Rush,et al. The Design and Fabrication of Monomode Optical Fiber , 1982 .

[4] J. D. Rush,et al. Interplay of design parameters and fabrication conditions on the performance of monomode fibers made by MCVD , 1981 .

[5] Leonard George Cohen,et al. Tailoring zero chromatic dispersion into the 1.5-1.6 μm low-loss spectral region of single-mode fibres , 1979 .

[6] Toshihito Hosaka,et al. Fabrication of Single-Mode Fibers for 1.5 µm Wavelength Region , 1980 .

[7] A. C. Hart,et al. High Strength Furnace-Drawn Optical Fibers , 1979 .

[8] J. D. Rush,et al. Drawing-dependent losses in dispersion-shifted monomode fibers , 1982 .

[9] J. D. Rush,et al. Monomode fibre with ultra-low loss and minimum dispersion at 1.55 μm , 1982 .