Strengthening mechanism of cemented hydrate‐bearing sand at microscales

On the basis of hypothetical particle-level mechanisms, several constitutive models of hydrate-bearing sediments have been proposed previously for gas production. However, to the best of our knowledge, the microstructural large-strain behaviors of hydrate-bearing sediments have not been reported to date because of the experimental challenges posed by the high-pressure and low-temperature testing conditions. Herein, a novel microtriaxial testing apparatus was developed, and the mechanical large-strain behavior of hydrate-bearing sediments with various hydrate saturation values (Sh = 0%, 39%, and 62%) was analyzed using microfocus X-ray computed tomography. Patchy hydrates were observed in the sediments at Sh = 39%. The obtained stress-strain relationships indicated strengthening with increasing hydrate saturation and a brittle failure mode of the hydrate-bearing sand. Localized deformations were quantified via image processing at the submillimeter and micrometer scale. Shear planes and particle deformation and/or rotation were detected, and the shear band thickness decreased with increasing hydrate saturation.

[1]  Tae Sup Yun,et al.  Physical properties of hydrate‐bearing sediments , 2009 .

[2]  Yosuke Higo,et al.  Investigation of localized deformation in partially saturated sand under triaxial compression using microfocus X-ray CT with digital image correlation , 2013 .

[3]  George J. Moridis,et al.  Methane hydrate formation and dissociation in a partially saturated core-scale sand sample , 2005 .

[4]  Jonny Rutqvist,et al.  Numerical Studies on Two-Way Coupled Fluid Flow and Geomechanics in Hydrate Deposits , 2012 .

[5]  Tsutomu Yamaguchi,et al.  Numerical Study On Dissociation of Methane Hydrate And Gas Production Behavior In Laboratory-Scale Experiments For Depressurization: Part 3-Numerical Study On Estimation of Permeability In Methane Hydrate Reservoir , 2009 .

[6]  S. Pinkert,et al.  Failure Mechanisms in Cemented Hydrate-Bearing Sands , 2015 .

[7]  M. Scheel,et al.  Liquid distribution and cohesion in wet granular assemblies beyond the capillary bridge regime , 2008 .

[8]  J. Santamarina,et al.  Laboratory X-ray Tomography: A Valuable Experimental Tool for Revealing Processes in Soils , 2014 .

[9]  T. Kanno,et al.  Operational overview of the first offshore production test of methane hydrates in the Eastern Nankai Trough , 2014 .

[10]  T. Ebinuma,et al.  Structure Analyses of Artificial Methane Hydrate Sediments by Microfocus X-ray Computed Tomography , 2004 .

[11]  J. Nagao,et al.  Mechanical behavior of hydrate-bearing pressure-core sediments visualized under triaxial compression , 2015 .

[12]  Kenichi Soga,et al.  Stress-strain response of hydrate-bearing sands: Numerical study using discrete element method simulations , 2012 .

[13]  C.R.I. Clayton,et al.  Influence of gas hydrate morphology on the seismic velocities of sands , 2009 .

[14]  Sayuri Kimoto,et al.  A chemo-thermo-mechanically coupled numerical simulation of the subsurface ground deformations due to methane hydrate dissociation , 2007 .

[15]  Yukio Nakata,et al.  Basic research on the mechanical behavior of methane hydrate-sediments mixture , 2005 .

[16]  Alex Liberzon,et al.  Ieee Transactions on Instrumentation and Measurement 1 Long-duration Time-resolved Piv to Study Unsteady Aerodynamics , 2022 .

[17]  C. Clayton,et al.  A laboratory investigation into the seismic velocities of methane gas hydrate‐bearing sand , 2005 .

[18]  William F. Waite,et al.  Hydrate morphology: Physical properties of sands with patchy hydrate saturation , 2012 .

[19]  S. Dai,et al.  Multi-property characterization chamber for geophysical-hydrological investigations of hydrate bearing sediments. , 2014, The Review of scientific instruments.

[20]  Norio Tenma,et al.  Triaxial compressive properties of artificial methane-hydrate-bearing sediment , 2011 .

[21]  Tae Sup Yun,et al.  Mechanical properties of sand, silt, and clay containing tetrahydrofuran hydrate , 2007 .

[22]  T. Sugahara,et al.  Thermodynamic and Raman Spectroscopic Studies of Xe and Kr Hydrates , 2005 .

[23]  Glen M. Bellew,et al.  Diagenesis, sediment strength, and pore collapse in sediment approaching the Nankai Trough subduction zone , 2007 .

[24]  Gioacchino Viggiani,et al.  Discrete and continuum analysis of localised deformation in sand using X-ray mu CT and volumetric digital image correlation , 2010 .

[25]  Y. P. Handa.  Calorimetric determinations of the compositions, enthalpies of dissociation, and heat capacities in the range 85 to 270 K for clathrate hydrates of xenon and krypton☆ , 1986 .

[26]  Yukio Nakata,et al.  Mechanical and dissociation properties of methane hydrate-bearing sand in deep seabed , 2013 .

[27]  C.R.I. Clayton,et al.  The effects of disseminated methane hydrate on the dynamic stiffness and damping of a sand , 2005 .

[28]  F. Enzmann,et al.  Microstructural evolution of gas hydrates in sedimentary matrices observed with synchrotron X‐ray computed tomographic microscopy , 2015 .

[29]  Yoshihiro Konno,et al.  Pressurized subsampling system for pressured gas-hydrate-bearing sediment: microscale imaging using X-ray computed tomography. , 2014, The Review of scientific instruments.

[30]  W. Winters.  Physical properties of sediments from the JAPEX/JNOC/GSC Mallik 2L-38 gas hydrate research well , 1999 .

[31]  Yukio Nakata,et al.  Mechanical behavior of gas‐saturated methane hydrate‐bearing sediments , 2013 .

[32]  Kazuo Aoki,et al.  Mechanical Properties of Sandy Sediment Containing Marine Gas Hydrates In Deep Sea Offshore Japan , 2007 .

[33]  Kenichi Soga,et al.  Coupled deformation–flow analysis for methane hydrate extraction , 2010 .