Cellular Polymer Ferroelectret: A Review on Their Development and Their Piezoelectric Properties

Because of their ability to show ferroelectret behavior when exposed to an external electric field, cellular polymers have been recently considered for ferroelectret applications. These cellular polymer films can be produced by stretching or foaming, but depending on the application and conditions, different polymers, such as polypropylene (PP), poly(ethylene terephthalate), poly(ethylene naphthalate), poly(tetrafluoro ethylene), cross-linked PP, and some cyclo-olefines, have been considered. Nevertheless, cellular PP was the most investigated material because of its outstanding properties such as high piezoelectric d33 coefficient, flexibility, good fatigue resistance, good charge trapping properties, and low cost. In this review, recent advances related to the materials used for ferroelectret applications and their processing are discussed. The effect of different parameters such as pressure, electrical breakdown strength of the gas phase, presence of fillers, and service temperature on the d33 coefficient is presented and discussed.

[1]  M. Sain,et al.  Investigating the Mechanical Response of Soy-Based Polyurethane Foams with Glass Fibers under Compression at various Rates , 2015 .

[2]  X. Qiu,et al.  Turning polymer foams or polymer-film systems into ferroelectrets: dielectric barrier discharges in voids , 2011, IEEE Transactions on Dielectrics and Electrical Insulation.

[3]  A. Mellinger,et al.  Towards a better understanding of dielectric barrier discharges in ferroelectrets: Paschen breakdown fields in micrometer sized voids , 2014 .

[4]  Xiaoqing Zhang,et al.  Thermally stable fluorocarbon ferroelectrets with high piezoelectric coefficient , 2006 .

[5]  Chih-Jer Lin,et al.  Tracking control of a biaxial piezo-actuated positioning stage using generalized Duhem model , 2012, Comput. Math. Appl..

[6]  Reimund Gerhard-Multhaupt,et al.  Less can be more. Holes in polymers lead to a new paradigm of piezoelectric materials for electret transducers , 2002 .

[7]  Xiaoqing Zhang,et al.  Additives to improve the electret properties of isotactic polypropylene , 2007 .

[8]  Werner Wirges,et al.  Penetration of sulfur hexafluoride into cellular polypropylene films and its effect on the electric charging and electromechanical response of ferroelectrets , 2005 .

[9]  R. Gerhard-Multhaupt,et al.  Piezoelectrets from thermo-formed bubble structures of fluoropolymer-electret films , 2006, IEEE Transactions on Dielectrics and Electrical Insulation.

[10]  H. Seggern,et al.  Polarization hysteresis and piezoelectricity in open-porous fluoropolymer sandwiches , 2007 .

[11]  Gerhard M. Sessler,et al.  Piezoelectricity in cellular electret films , 2000 .

[12]  Xiaoqing Zhang,et al.  Quasi-static and dynamic piezoelectric d33 coefficients of irradiation cross-linked polypropylene ferroelectrets , 2009, Journal of Materials Science.

[13]  H. Ohigashi,et al.  Electromechanical properties of polarized polyvinylidene fluoride films as studied by the piezoelectric resonance method , 1976 .

[14]  Liwei Lin,et al.  Direct-write piezoelectric polymeric nanogenerator with high energy conversion efficiency. , 2010, Nano letters.

[15]  R. Gerhard-Multhaupt,et al.  Porous PTFE space-charge electrets for piezoelectric applications , 2000 .

[16]  M. Bousmina,et al.  Cellular polypropylene‐based piezoelectric films , 2012 .

[17]  Xiaoqing Zhang,et al.  Piezoelectric activity and thermal stability of cellular fluorocarbon films , 2007 .

[18]  Z. Xia,et al.  Improved piezoelectric properties of cellular polypropylene ferroelectrets by chemical modification , 2009 .

[19]  P. Destruel,et al.  Pressure and temperature dependence of the electromechanical properties of polarized polyvinylidene fluoride films , 1984 .

[20]  Reinhard Schwödiauer,et al.  Preparation and characterization of novel piezoelectric and pyroelectric polymer electrets , 2000 .

[21]  Yewen Zhang,et al.  Significantly improved piezoelectric thermal stability of cellular polypropylene films by high pressure fluorination and post-treatments , 2012 .

[22]  Jukka Lekkala,et al.  Large and broadband piezoelectricity in smart polymer-foam space-charge electrets , 2000 .

[23]  J. Hillenbrand,et al.  Quasistatic and dynamic piezoelectric coefficients of polymer foams and polymer film systems , 2004, IEEE Transactions on Dielectrics and Electrical Insulation.

[24]  Xiaoqing Zhang,et al.  Development of porous polypropylene blends with NA11 particles and glass hollow spheres by biaxial stretching for electret applications , 2006, IEEE Transactions on Dielectrics and Electrical Insulation.

[25]  R. Kressmann,et al.  New piezoelectric polymer for air-borne and water-borne sound transducers. , 2001, The Journal of the Acoustical Society of America.

[26]  Werner Wirges,et al.  Optimized Preparation of Elastically Soft, Highly Piezoelectric, Cellular Ferroelectrets from Nonvoided Poly(ethylene Terephthalate) Films , 2007 .

[27]  D. Fabiani,et al.  Charging properties and time-temperature stability of innovative polymeric cellular ferroelectrets , 2007, IEEE Transactions on Dielectrics and Electrical Insulation.

[28]  Xilong Zhou,et al.  Piezoelectricity and ferroelectricity of cellular polypropylene electrets films characterized by piezoresponse force microscopy , 2014 .

[29]  X. Qiu,et al.  Piezoelectricity of single-and multi-layer cellular polypropylene film electrets , 2007 .

[30]  T. A. Venkatesh,et al.  Effects of foam shape and porosity aspect ratio on the electromechanical properties of 3-3 piezoelectric foams , 2012 .

[31]  M. Wegener,et al.  Cellular-foam polypropylene ferroelectrets with increased film thickness and reduced resonance frequency , 2013 .

[32]  Axel Mellinger,et al.  Dielectric resonance spectroscopy: a versatile tool in the quest for better piezoelectric polymers , 2003 .

[33]  Xiaoqing Zhang,et al.  Fluoroethylenepropylene ferroelectrets with patterned microstructure and high, thermally stable piezoelectricity , 2012 .

[34]  E. Tuncer.  Numerical calculations of effective elastic properties of two cellular structures , 2004, cond-mat/0404166.

[35]  T. A. Venkatesh,et al.  Computational Modeling of Piezoelectric Foams , 2013 .

[36]  R. Lerch,et al.  Ultrasound transducers based on ferroelectret materials , 2011, IEEE Transactions on Dielectrics and Electrical Insulation.

[37]  A. Mellinger,et al.  Breakdown threshold of dielectric barrier discharges in ferroelectrets: where Paschen's law fails , 2011, IEEE Transactions on Dielectrics and Electrical Insulation.

[38]  Xiaoqing Zhang,et al.  Piezoelectric properties of irradiation-crosslinked polypropylene ferroelectrets , 2007 .

[39]  Z. Zhong,et al.  Micromechanical prediction of the effective electromechanical properties of cellular ferroelectrets , 2010 .

[40]  Werner Wirges,et al.  Controlled inflation of voids in cellular polymer ferroelectrets: Optimizing electromechanical transducer properties , 2004 .

[41]  Werner Wirges,et al.  Barrier discharges in cellular polypropylene ferroelectrets : How do they influence the electromechanical properties? , 2007 .

[42]  Jukka Lekkala,et al.  Modelling the electromechanical film (EMFi) , 2000 .

[43]  Xiaoqing Zhang,et al.  Electret properties and chemical modification of cellular polypropylene films , 2007 .

[44]  Peng Fang,et al.  Cellular polyethylene-naphthalate films for ferroelectret applications: foaming, inflation and stretching, assessment of electromechanically relevant structural features , 2008 .

[45]  Gerhard M. Sessler,et al.  Piezoelectric d33 coefficient of cellular polypropylene subjected to expansion by pressure treatment , 2004 .

[46]  X. Qiu,et al.  Spectroscopic study of dielectric barrier discharges in cellular polypropylene ferroelectrets , 2007 .

[47]  M. Kreutzbruck,et al.  Nonlinear electromechanical response of the ferroelectret ultrasonic transducers , 2010 .

[48]  J. Ealo,et al.  Airborne ultrasonic phased arrays using ferroelectrets: a new fabrication approach , 2009, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[49]  Dimitris I. Collais,et al.  Tesile toughness of microcellular foams of polystyrene, styrene‐acrylonitrile copolymer, and polycarbonate, and the effect of dissolved gas on the tensile toughness of the same polymer matrices and microcellular foams , 1995 .

[50]  Xiaoqing Zhang,et al.  Verification of a model for the piezoelectric d33-coefficient of cellular electret films , 2005 .

[51]  Bai-Xiang Xu,et al.  Continuum modeling of charging process and piezoelectricity of ferroelectrets , 2013 .

[52]  R. Kressmann,et al.  Linear and nonlinear piezoelectric response of charged cellular polypropylene , 2001 .

[53]  Reimund Gerhard-Multhaupt,et al.  High surface-charge stability of porous polytetrafluoroethylene electret films at room and elevated temperatures , 1999 .

[54]  Z. Xia,et al.  Piezoelectric coefficients of cross-linked polypropylene films stretched at elevated temperatures , 2011 .

[55]  Reinhard Schwödiauer,et al.  Elastic and electromechanical properties of polypropylene foam ferroelectrets , 2005 .

[56]  Xiaoqing Zhang,et al.  Low‐Cost, Large‐Area, Stretchable Piezoelectric Films Based on Irradiation‐Crosslinked Poly(propylene) , 2014 .

[57]  M. Machnik,et al.  Increase of Piezoelectric Constant and Thermal Durability of Polypropylene Electret by Introducing SiO2 and Kaolin Filler and Creating a Cellular Structure , 2015, Journal of Electronic Materials.

[58]  Werner Wirges,et al.  Thermal and Temporal Stability of Ferroelectret Films Made from Cellular Polypropylene/Air Composites , 2006 .

[59]  Werner Wirges,et al.  Piezoelectric Polyethylene Terephthalate (PETP) Foams – Specifically Designed and Prepared Ferroelectret Films , 2005 .

[60]  J. Hillenbrand,et al.  High-sensitivity piezoelectret-film accelerometers , 2010, IEEE Transactions on Dielectrics and Electrical Insulation.

[61]  Gerhard M. Sessler,et al.  High-sensitivity piezoelectric microphones based on stacked cellular polymer films (L) , 2004 .

[62]  Siegfried Bauer,et al.  Dielectric barrier microdischarges: Mechanism for the charging of cellular piezoelectric polymers , 2002 .

[63]  Gerhard M. Sessler,et al.  Electromechanical response of cellular electret films , 1999 .

[64]  Werner Wirges,et al.  Two-step inflation of cellular polypropylene films: void-thickness increase and enhanced electromechanical properties , 2004 .

[65]  Xiaoqing Zhang,et al.  Ferroelectrets with improved thermal stability made from fused fluorocarbon layers , 2007 .

[66]  M. Wegener,et al.  Novel heat durable electromechanical film: processing for electromechanical and electret applications , 2006, IEEE Transactions on Dielectrics and Electrical Insulation.

[67]  Xiaoqing Zhang,et al.  Mechanical and piezoelectric performance of cross-linked polypropylene films treated with extending , 2015 .

[68]  G. Sessler,et al.  Ferroelectrets: Soft Electroactive Foams for Transducers , 2004 .

[69]  Xiaoqing Zhang,et al.  Improvement of piezoelectric activity of cellular polymers using a double-expansion process , 2004 .

[70]  G. Montanari,et al.  Comparison and electrical modeling of new polymeric cellular electrets , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[71]  Jonathan S. Colton,et al.  The nucleation of microcellular thermoplastic foam with additives: Part I: Theoretical considerations , 1987 .

[72]  A. Holmes-Siedle,et al.  PVdF: An electronically-active polymer for industry , 1983 .

[73]  D.M. Taylor,et al.  Thermal instability of electromechanical films of cellular polypropylene , 2005, IEEE Transactions on Dielectrics and Electrical Insulation.

[74]  Karl A. Seeler,et al.  Tension-Tension Fatigue of Microcellular Polycarbonate: Initial Results , 1993 .

[75]  D. Rodrigue,et al.  Morphology development of polypropylene cellular films for piezoelectric applications , 2012 .

[76]  M. Bousmina,et al.  Theoretical modeling and experiments on the piezoelectric coefficient in cellular polymer films , 2013 .

[77]  X. Qiu,et al.  Influence of gas pressure in the voids during charging on the piezoelectricity of ferroelectrets , 2008 .

[78]  S. Bauer,et al.  Charged cellular polymers with "ferroelectretic" behavior , 2004, IEEE Transactions on Dielectrics and Electrical Insulation.

[79]  Xiaoqing Zhang,et al.  Nucleation of isotactic polypropylene by triphenylamine-based trisamide derivatives and their influence on charge-storage properties , 2004 .

[80]  A. Mellinger,et al.  Pressure dependence of space charge deposition in piezoelectric polymer foams: simulations and experimental verification , 2012 .

[81]  S. Bergweiler,et al.  Piezoelectric two-layer stacks of cellular polypropylene ferroelectrets: transducer response at audio and ultrasound frequencies , 2005, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[82]  Peng Fang,et al.  Cellular polyethylene-naphthalate ferroelectrets: Foaming in supercritical carbon dioxide, structural and electrical preparation, and resulting piezoelectricity , 2007 .

[83]  Anton Erhard,et al.  Piezoelectric and electrostrictive effects in ferroelectret ultrasonic transducers , 2012 .

[84]  Jukka Lekkala,et al.  Piezo- and pyroelectricity of a polymer-foam space-charge electret , 2001 .

[85]  Xiaoqing Zhang,et al.  Quasi-static and dynamic piezoelectric responses of layered polytetrafluoroethylene ferroelectrets , 2014 .

[86]  Z. Zhong,et al.  Time dependence of piezoelectric d33 coefficient of cellular ferroelectret polypropylene film , 2011 .

[87]  H. Kawai,et al.  The Piezoelectricity of Poly (vinylidene Fluoride) , 1969 .

[88]  Jukka Lekkala,et al.  ElectroMechanical Film (EMFi) — a new multipurpose electret material , 2000 .

[89]  Michael Wegener,et al.  Understanding the role of the gas in the voids during corona charging of cellular electret films - a way to enhance their piezoelectricity , 2001 .

[90]  Alper Erturk,et al.  Piezoelectret foam–based vibration energy harvesting , 2014 .

[91]  S. Lang,et al.  Review of some lesser-known applications of piezoelectric and pyroelectric polymers , 2006 .

[92]  K. Kirjavainen,et al.  Electrothermomechanical Film. Part I. Design and Characteristics , 1989 .