Photo-curing modelling: direct irradiation
暂无分享,去创建一个
[1] Xiang Zhang,et al. Diffusion-limited photopolymerization in scanning micro-stereolithography , 2004 .
[2] David W. Rosen,et al. Stereolithography cure modelling and simulation , 2004 .
[3] C. E. Corcione,et al. Photopolymerization kinetics of an epoxy‐based resin for stereolithography , 2004 .
[4] J. Macan,et al. Study of cure kinetics of epoxy-silica organic–inorganic hybrid materials , 2004 .
[5] Kishore Pochiraju,et al. Three-dimensional finite element simulation of curing of polymer composites , 2004 .
[6] Hoon Cheol Park,et al. Three-dimensional cure simulation of composite structures by the finite element method , 2003 .
[7] Geoffrey R. Mitchell,et al. Stereo‐thermal‐lithography: a new principle for rapid prototyping , 2003 .
[8] F. Boey,et al. UV photo curing of N,N′-bismaleimido-4, 4′-diphenylmethane , 2003 .
[9] C. Jiang,et al. Numerical Analysis of a Mask Type Stereolithography Process Using a Dynamic Finite-Element Method , 2003 .
[10] N. Pantelelis,et al. Cure cycle design for composite materials using computer simulation and optimisation tools , 2003 .
[11] Vipin Shukla,et al. Film performance and UV curing of epoxy acrylate resins , 2002 .
[12] G. Assche,et al. Modeling and experimental verification of the kinetics of reacting polymer systems , 2002 .
[13] S. Carr,et al. Influence of cure via network structure on mechanical properties of a free-radical polymerizing thermoset , 2002 .
[14] P. Zetterlund,et al. Free volume-based modelling of free radical crosslinking polymerisation of unsaturated polyesters , 2002 .
[15] A. Bhattacharya. Radiation and industrial polymers , 2000 .
[16] Jerry Y. H. Fuh,et al. Curing characteristics of acrylic photopolymer used in stereolithography process , 1999 .
[17] E. Andrzejewska,et al. Polymerization kinetics of photocurable acrylic resins , 1998 .
[18] Andrew Y. C. Nee,et al. Characteristics of photopolymeric material used in rapid prototypes Part I. Mechanical properties in the green state , 1997 .
[19] Roland W. Lewis,et al. The Finite Element Method in Heat Transfer Analysis , 1996 .
[20] V. Dakin. Radiation‐induced network formation in polymers , 1996 .
[21] Jean-Pierre Fouassier,et al. Photoinitiation, Photopolymerization, and Photocuring: Fundamentals and Applications , 1995 .
[22] Richard P. Chartoff,et al. A process model for nonisothermal photopolymerization with a laser light source. I: Basic model development , 1995 .
[23] Wenfang Shi,et al. UV curing of composites based on modified unsaturated polyester , 1994 .
[24] J. Galy,et al. Isothermal curing of an uncatalyzed dicyanate ester monomer : kinetics and modeling , 1993 .
[25] C. Macosko,et al. Kinetic model for crosslinking free radical polymerization including diffusion limitations , 1992 .
[26] C. Macosko,et al. Glass Transition Temperature as a Function of Conversion in Thermosetting Polymers , 1991 .
[27] F. Lapique,et al. Curing effects on viscosity and mechanical properties of a commercial epoxy resin adhesive , 2002 .
[28] J. Reddy,et al. The Finite Element Method in Heat Transfer and Fluid Dynamics , 1994 .
[29] E. Selli,et al. Photopolymerization of multifunctional monomers: Kinetic aspects , 1993 .
[30] J. Fouassier,et al. Radiation curing in polymer science and technology , 1993 .
[31] W. L. Wood. Practical Time-Stepping Schemes , 1990 .
[32] Peter C. Powell,et al. Engineering with Polymers , 1983 .
[33] E. Turi,et al. Thermal characterization of polymeric materials , 1981 .
[34] P. Flory. Principles of polymer chemistry , 1953 .