Bolted connections in PFRP structures.

A brief overview of some of the more noteworthy PFRP structures is presented. It is noted that, at the present stage of development, bolted connections are used extensively in fabricating structural frames from PFRP sections. Tests on bolted connections between PFRP sections, i.e., axially loaded and moment connections, and guidance for their design are reviewed. Some areas where further research and guidance are needed are mentioned and the paper is concluded with a few remarks on possible future developments.

[1]  Ayman S. Mosallam,et al.  Performance of Pultruded FRP Connections under Static and Dynamic Loads , 1994 .

[2]  I. D. Parsons,et al.  An experimental study of the behavior of connections for pultruded GFRP I-beams and rectangular tubes , 1998 .

[3]  J. T. Mottram,et al.  State-of-the-art review on the design of beam-to-column connections for pultruded frames , 1996 .

[4]  Sami H. Rizkalla,et al.  MULTIBOLTED JOINTS FOR GFRP STRUCTURAL MEMBERS , 1997 .

[5]  Michel Bruneau,et al.  CYCLIC TESTING OF PULTRUDED FIBER-REINFORCED PLASTIC BEAM-COLUMN RIGID CONNECTION , 1994 .

[6]  S. Luke,et al.  STRENGTHENING WITH CARBON FIBRE PLATES , 1998 .

[7]  G E Johansen,et al.  DESIGN AND CONSTRUCTION OF TWO FRP PEDESTRIAN BRIDGES IN HALEAKALA NATIONAL PARK, MAUI, HAWAII , 1996 .

[8]  G J Turvey,et al.  SEMI-RIGID CONNECTIONS AND THEIR EFFECTS ON THE SWAY RESPONSE OF PULTRUDED GRP COLUMNS IN LOW-RISE FRAME STRUCTURES , 1998 .

[9]  Hota V. S. GangaRao,et al.  Evaluation of FRP Composites Bolted and Adhesive Joints , 1996 .

[10]  I. D. Parsons,et al.  Experimental Comparisons of Connections for GFRP Pultruded Frames , 1999 .

[11]  M. A. Erki.  Bolted glass-fibre-reinforced plastic joints , 1995 .

[12]  Zia Razzaq,et al.  Load and resistance factor design (LRFD) approach for bolted joints in pultruded composites , 1996 .

[13]  Lawrence C. Bank,et al.  Design and Performance of Connections for Pultruded Frame Structures , 1994 .

[14]  L. Hollaway,et al.  The experimental behaviour of bolted joints in pultruded glass/ polyester material. Part 2: Two-bolt joints , 1993 .

[15]  C. Cooper,et al.  Effects of joint geometry and bolt torque on the structural performance of single bolt tension joints in pultruded GRP sheet material , 1995 .

[16]  Ayman S. Mosallam.  Connection and Reinforcement Design Details for Pultruded Fiber Reinforced Plastic (PFRP) Composite Structures , 1995 .

[17]  David J. Evans,et al.  Experimental and Numerical Evaluation of Beam-To-Column Connections for Pultruded Structures , 1996 .

[18]  Geoffrey Turvey.  Single-bolt tension joint tests on pultruded GRP plate — effects of tension direction relative to pultrusion direction , 1998 .

[19]  Geoffrey Turvey.  Analysis of pultruded glass reinforced plastic beams with semi-rigid end connections. , 1997 .

[20]  J. Clarke.  Structural design of polymer composites : EUROCOMP design code and handbook , 1996 .