PFC-Free Dry Etching Method for Si Using Narrow-Gap VHF Plasma at Subatmospheric Pressure

We propose a Si dry etching method that does not require any perfluorocarbon (PFC) source gases with a high global warming potential. This method uses a narrow-gap, very high frequency (VHF) glow plasma of an 0 2 /He gas mixture at subatmospheric pressure to generate etchant species (such as fluorine atoms) from the stable solid poly(tetrafluoroethylene) (PTFE) resin. The gas component generated by the chemical reaction between the plasma and PTFE is studied by Fourier transform IR gas analysis. In using a pure He plasma, the generated gases almost consist of PFC molecules. On the contrary, in the O 2 /He mixture plasma, stable gaseous species generated from the PTFE source mainly consist of CO 2 and COF 2 . The etching rate of Si depends on both oxygen partial pressure (P o2 ) and input electric power (W VHF ). Especially, the Si etching rate is very sensitive to P o2 . These results combined with the detailed analysis of optical emission spectra suggest that the oxygen addition suppresses the generation of higher order C x F y (x > 1) molecules and increases the etchant species, such as F 2 and COF 2 . A very high Si etching rate of 27 μm/min at P o2 = 40 Torr and W VHF = 250 W has been attained.

[1]  Yuzo Mori,et al.  The study of fabrication of the x-ray mirror by numerically controlled plasma chemical vaporization machining: Development of the machine for the x-ray mirror fabrication , 2000 .

[2]  J. Comeford,et al.  Fermi resonance in condensed CF4 and CCl4 , 1965 .

[3]  H. Ohmi,et al.  Silicon film formation by chemical transport in atmospheric-pressure pure hydrogen plasma , 2007 .

[4]  Takehiko Shimanouchi,et al.  Tables of molecular vibrational frequencies. Consolidated volume II , 1972 .

[5]  I. C. Plumb,et al.  A model of the chemical processes occurring in CF4/O2 discharges used in plasma etching , 1986 .

[6]  C. J. Mogab,et al.  Plasma etching of Si and SiO2—The effect of oxygen additions to CF4 plasmas , 1978 .

[7]  K. Tachibana,et al.  Plasma polymerization of fluorocarbon thin films on high temperature substrate and its application to low-k films , 2007 .

[8]  K. Gleason,et al.  Structure and Morphology of Fluorocarbon Films Grown by Hot Filament Chemical Vapor Deposition , 2000 .

[9]  Y. Suda,et al.  Amorphous fluorocarbon polymer (a-C:F) films obtained by plasma enhanced chemical vapor deposition from perfluoro-octane (C8F18) vapor I: Deposition, morphology, structural and chemical properties , 2004 .

[10]  H. Sugai,et al.  Production and control of high-pressure surface-wave plasmas for water-repellant fluorocarbon film deposition , 2005 .

[11]  H. Ohmi,et al.  High‐rate preparation of thin Si films by atmospheric‐pressure plasma enhanced chemical transport , 2008 .

[12]  K. Murata,et al.  A study of Si plasma etching in CF4+O2 gas with a planar‐type reactor , 1983 .

[13]  T. Kenny,et al.  Molecular dynamics simulations of silicon-fluorine etching. , 1996, Journal of molecular graphics.

[14]  Goddard,et al.  Reaction mechanism for fluorine etching of silicon. , 1987, Physical review. B, Condensed matter.

[15]  M. Kushner.  A kinetic study of the plasma‐etching process. I. A model for the etching of Si and SiO2 in CnFm/H2 and CnFm/O2 plasmas , 1982 .

[16]  Tadahiro Ohmi,et al.  Total Room Temperature Wet Cleaning for Si Substrate Surface , 1996 .

[17]  Hiroaki Kakiuchi,et al.  Impacts of noble gas dilution on Si film structure prepared by atmospheric-pressure plasma enhanced chemical transport , 2008 .

[18]  D. Edell,et al.  Molecular Design of Fluorocarbon Film Architecture by Pulsed Plasma Enhanced and Pyrolytic Chemical Vapor Deposition , 1999 .

[19]  N. Lee,et al.  Very high-rate chemical dry etching of Si in F2 remote plasmas with nitrogen-containing additive gases , 2007 .

[20]  A. Hydes,et al.  Spectroscopic studies of fluorescent emission in plasma etching of Si and SiO2 and the mechanism of gas-surface interactions , 1984 .

[21]  C. Maiti,et al.  Rapid plasma etching of silicon, silicon dioxide and silicon nitride using microwave discharges , 1993 .

[22]  B. Dils,et al.  Absolute rate coefficient of the reaction of CF2(ã3B1) with O2 between 288 and 600 K , 2003 .

[23]  A. Lunk,et al.  Spectroscopic Diagnostics of DBD in Ar/Fluorocarbon Mixtures – Correlation between Plasma Parameters and Properties of Deposited Polymer Films , 2005 .

[24]  Hidekazu Mimura,et al.  Fabrication of ultrathin and highly uniform silicon on insulator by numerically controlled plasma chemical vaporization machining. , 2007, The Review of scientific instruments.

[25]  C. Labelle,et al.  Fourier Transform Infrared Spectroscopy Study of Thermal Annealing Behavior of ECR Pulsed Plasma Deposited Fluorocarbon Thin Films from 1,1,2,2‐Tetrafluoroethane , 2000 .

[26]  C. Beenakker,et al.  Decomposition and product formation in CF4‐O2 plasma etching silicon in the afterglow , 1981 .

[27]  R. D'agostino,et al.  Spectroscopic diagnostics of CF4‐O2 plasmas during Si and SiO2 etching processes , 1981 .