The effect of adhesive failure and defects on the stress distribution in all-ceramic crowns.
暂无分享,去创建一个
[1] M. Kern,et al. Fracture resistance of ceramic and polymer-based occlusal veneer restorations. , 2017, Journal of the mechanical behavior of biomedical materials.
[2] A. Abdulmajeed,et al. Effect of different treatments on the flexural strength of fully versus partially stabilized monolithic zirconia , 2017, The Journal of prosthetic dentistry.
[3] H. Özdemir,et al. The effect of heat treatments applied to superstructure porcelain on the mechanical properties and microstructure of lithium disilicate glass ceramics. , 2017, Dental materials journal.
[4] M. Swain,et al. Three-dimensional characterization and distribution of fabrication defects in bilayered lithium disilicate glass-ceramic molar crowns. , 2017, Dental materials : official publication of the Academy of Dental Materials.
[5] F. Alqahtani. Marginal fit of all-ceramic crowns fabricated using two extraoral CAD/CAM systems in comparison with the conventional technique , 2017, Clinical, cosmetic and investigational dentistry.
[6] S. I. Rokhlin,et al. Survival Predictions of Ceramic Crowns Using Statistical Fracture Mechanics , 2017, Journal of dental research.
[7] Myung-Jin Lim,et al. Effect of adhesive luting on the fracture resistance of zirconia compared to that of composite resin and lithium disilicate glass ceramic , 2016, Restorative dentistry & endodontics.
[8] S. Ha,et al. Biomechanical three-dimensional finite element analysis of monolithic zirconia crown with different cement thickness , 2016 .
[9] S. Rokhlin,et al. 3D statistical failure analysis of monolithic dental ceramic crowns. , 2016, Journal of biomechanics.
[10] M. Cune,et al. Fracture strength, failure type and Weibull characteristics of lithium disilicate and multiphase resin composite endocrowns under axial and lateral forces. , 2016, Dental materials : official publication of the Academy of Dental Materials.
[11] Carmen González-Lluch,et al. Analysis of the effect of design parameters and their interactions on the strength of dental restorations with endodontic posts, using finite element models and statistical analysis , 2016, Computer methods in biomechanics and biomedical engineering.
[12] A. Versluis,et al. Crown fracture: Failure load, stress distribution, and fractographic analysis. , 2015, The Journal of prosthetic dentistry.
[13] Zhiqiang Lv,et al. An improved Corten-Dolan’s model based on damage and stress state effects , 2015 .
[14] S. Deb,et al. Evaluation of shear bond strength between zirconia core and ceramic veneers fabricated by pressing and layering techniques: In vitro study , 2015, Journal of pharmacy & bioallied sciences.
[15] Y. Duan,et al. Effect of elasticity on stress distribution in CAD/CAM dental crowns: Glass ceramic vs. polymer-matrix composite. , 2015, Journal of dentistry.
[16] F. Rueggeberg,et al. The effect of photopolymerization on the degree of conversion, polymerization kinetic, biaxial flexure strength, and modulus of self-adhesive resin cements. , 2015, The Journal of prosthetic dentistry.
[17] Marco Aurélio Carvalho,et al. Effect of platform connection and abutment material on stress distribution in single anterior implant-supported restorations: a nonlinear 3-dimensional finite element analysis. , 2014, The Journal of prosthetic dentistry.
[18] G. Quinn,et al. Fracture of a veneered-ZrO2 dental prosthesis from an inner thermal crack , 2014 .
[19] H. Lekesiz. Reliability Estimation for Single-unit Ceramic Crown Restorations , 2014, Journal of dental research.
[20] Weiqiang Yu,et al. Fracture resistance of endodontically treated premolars restored with lithium disilicate CAD/CAM crowns or onlays and luted with two luting agents. , 2014, Dental materials journal.
[21] B. Lawn,et al. Edge chipping and flexural resistance of monolithic ceramics. , 2013, Dental materials : official publication of the Academy of Dental Materials.
[22] S. Reich,et al. Chair-side generated posterior lithium disilicate crowns after 4 years , 2013, Clinical Oral Investigations.
[23] Suk-Ho Kang,et al. Flexural strength and microstructure of two lithium disilicate glass ceramics for CAD/CAM restoration in the dental clinic , 2013, Restorative dentistry & endodontics.
[24] M. Bottino,et al. Effects of cement thickness and bonding on the failure loads of CAD/CAM ceramic crowns: multi-physics FEA modeling and monotonic testing. , 2012, Dental materials : official publication of the Academy of Dental Materials.
[25] C. Chung,et al. Stress-strain analysis for evaluating the effect of the orientation of dentin tubules on their mechanical properties and deformation behavior. , 2012, Journal of the mechanical behavior of biomedical materials.
[26] Hong-Zhong Huang,et al. A Practical Method for Determining the Corten-Dolan Exponent and Its Application to Fatigue Life Prediction , 2012 .
[27] Yu Pan,et al. Influence of veneer application on fracture behavior of lithium-disilicate-based ceramic crowns. , 2012, Dental materials : official publication of the Academy of Dental Materials.
[28] M. Nakagawa,et al. Failure morphology of all-ceramic prostheses. , 2012, Dental materials journal.
[29] P. Coelho,et al. Reliability of reduced-thickness and thinly veneered lithium disilicate crowns , 2012, BDJ.
[30] A. Canale,et al. Bonding lithium disilicate ceramic to feather-edge tooth preparations: a minimally invasive treatment concept. , 2012, The journal of adhesive dentistry.
[31] Shiwei Zhou,et al. Sensitivity analysis of bi-layered ceramic dental restorations. , 2012, Dental materials : official publication of the Academy of Dental Materials.
[32] Dennis J Fasbinder,et al. A clinical evaluation of chairside lithium disilicate CAD/CAM crowns: a two-year report. , 2010, Journal of the American Dental Association.
[33] W. Tuan,et al. Effect of abrasive grinding on the strength of Y-TZP , 2009 .
[34] T. Watson,et al. Effect of resin coating on adhesion and microleakage of computer-aided design/computer-aided manufacturing fabricated all-ceramic crowns after occlusal loading: a laboratory study. , 2009, European journal of oral sciences.
[35] E. D. Rekow,et al. Laboratory Simulation of Y-TZP All-ceramic Crown Clinical Failures , 2009, Journal of dental research.
[36] Moustafa N. Aboushelib,et al. Bridging the gap between clinical failure and laboratory fracture strength tests using a fractographic approach. , 2009, Dental materials : official publication of the Academy of Dental Materials.
[37] Yu Zhang,et al. Competition of fracture mechanisms in monolithic dental ceramics: flat model systems. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.
[38] Robert Danzer,et al. Fracture of Ceramics , 2008 .
[39] N. Katsube,et al. Residual interface tensile strength of ceramic bonded to dentin after cyclic loading and aging. , 2008, The Journal of prosthetic dentistry.
[40] E. D. Rekow,et al. Damage accumulation and fatigue life of particle-abraded ceramics. , 2006, The International journal of prosthodontics.
[41] P. Marquis,et al. The Strengthening Mechanism of Resin Cements on Porcelain Surfaces , 2006, Journal of dental research.
[42] S. Rosenstiel,et al. The effect of a layer of resin luting agent on the biaxial flexure strength of two all-ceramic systems. , 2005, The Journal of prosthetic dentistry.
[43] J. Sorensen,et al. Microleakage of various cementing agents for full cast crowns , 2005 .
[44] J. Matinlinna,et al. An introduction to silanes and their clinical applications in dentistry. , 2004, The International journal of prosthodontics.
[45] P. Vallittu,et al. Effect of surface conditioning methods on the bond strength of luting cement to ceramics. , 2003, Dental materials : official publication of the Academy of Dental Materials.
[46] B. Lawn,et al. Fracture of ceramic/ceramic/polymer trilayers for biomechanical applications. , 2003, Journal of biomedical materials research. Part A.
[47] A Imanishi,et al. 3-D Finite element analysis of all-ceramic posterior crowns. , 2003, Journal of oral rehabilitation.
[48] Nazanin Emami,et al. Effect of light power density variations on bulk curing properties of dental composites. , 2003, Journal of dentistry.
[49] L. Baratieri,et al. Dental adhesion: present state of the art and future perspectives. , 2002, Quintessence international.
[50] K A Malament,et al. Survival of Dicor glass-ceramic dental restorations over 16 years. Part III: effect of luting agent and tooth or tooth-substitute core structure. , 2001, The Journal of prosthetic dentistry.
[51] P. Lambrechts,et al. Adhesives and cements to promote preservation dentistry , 2001 .
[52] H Fischer,et al. Nondestructive estimation of the strength of dental ceramic materials. , 2001, Dental materials : official publication of the Academy of Dental Materials.
[53] Brian R. Lawn,et al. Fracture modes in brittle coatings with large interlayer modulus mismatch , 1999 .
[54] K. Anusavice,et al. Fracture Surface Characterization of Clinically Failed All-ceramic Crowns , 1994, Journal of dental research.
[55] J. Powers,et al. Bond strength of composite to etched and sandblasted porcelain. , 1993, American journal of dentistry.
[56] K. M. Golos,et al. Cumulative fatigue damage , 1988 .
[57] H R Horn,et al. Porcelain laminate veneers bonded to etched enamel. , 1983, Dental clinics of North America.
[58] Horn Hr,et al. Porcelain laminate veneers bonded to etched enamel. , 1983 .
[59] R. Kumari,et al. Comparative Evaluation of Bond Strength of Dual-Cured Resin Cements: An In-Vitro Study , 2015, Journal of international oral health : JIOH.
[60] D. Arola,et al. Reduction of load-bearing capacity of all-ceramic crowns due to cement aging. , 2013, Journal of the mechanical behavior of biomedical materials.
[61] L. Valandro,et al. Effect of resin cement type on the microtensile bond strength to lithium disilicate ceramic and dentin using different test assemblies. , 2013, The journal of adhesive dentistry.
[62] D. Edelhoff,et al. Clinical results of lithium-disilicate crowns after up to 9 years of service , 2012, Clinical Oral Investigations.
[63] M. Özcan,et al. Influence of resin cements and aging on the fracture resistance of IPS e.max press posterior crowns. , 2012, International Journal of Prosthodontics.
[64] R. Nagpal,et al. Dental adhesion: mechanism, techniques and durability. , 2012, The Journal of clinical pediatric dentistry.
[65] Paulo G Coelho,et al. Monolithic CAD/CAM lithium disilicate versus veneered Y-TZP crowns: comparison of failure modes and reliability after fatigue. , 2010, The International journal of prosthodontics.
[66] L. Gauckler,et al. Mechanical and fracture behavior of veneer-framework composites for all-ceramic dental bridges. , 2007, Dental materials : official publication of the Academy of Dental Materials.
[67] N. Katsube,et al. Influence of bond quality on failure load of leucite- and lithia disilicate-based ceramics. , 2007, The Journal of prosthetic dentistry.
[68] Jaap Schijve,et al. Fatigue of structures and materials , 2001 .