SLA Resins Modification by Liquid Mixing with Ceramic Powders Aiming at Mechanical Property and Thermal Stability Enhancement for Rapid Tooling Applications
暂无分享,去创建一个
E. Koumoulos | C. Charitidis | Melpo Karamitrou | D. Semitekolos | A. Karatza | P. Zouboulis | Iakovos Gavalas | A. Kontiza | Anna Karatza | Artemis Kontiza
[1] U. Kim,et al. The 3D Printing Behavior of Photocurable Ceramic/Polymer Composite Slurries Prepared with Different Particle Sizes , 2022, Nanomaterials.
[2] F. Calignano,et al. Photopolymerization of Ceramic Resins by Stereolithography Process: A Review , 2022, Applied Sciences.
[3] O. Soppera,et al. 3D Printing of Optical Materials by Processes Based on Photopolymerization: Materials, Technologies and Recent Advances. , 2022, Photonics Research.
[4] Shaojun Liu,et al. Effects of particle size and color on photocuring performance of Si3N4 ceramic slurry by stereolithography , 2020 .
[5] E. Levänen,et al. A comprehensive review of the photopolymerization of ceramic resins used in stereolithography , 2020 .
[6] S. Sprenger. Nanosilica-Toughened Epoxy Resins , 2020, Polymers.
[7] Bin Zou,et al. Fabrication and characterization of SiC whiskers toughened Al2O3 paste for stereolithography 3D printing applications , 2020, Journal of Alloys and Compounds.
[8] Jiaming Bai,et al. Development and evaluation of Al2O3–ZrO2 composite processed by digital light 3D printing , 2020 .
[9] Jimin Chen,et al. Fabrication of fine and complex lattice structure Al2O3 ceramic by digital light processing 3D printing technology , 2020, Journal of Materials Science.
[10] Haoyuan Quan,et al. Photo-curing 3D printing technique and its challenges , 2020, Bioactive materials.
[11] Dichen Li,et al. Influence of boundary masks on dimensions and surface roughness using segmented exposure in ceramic 3D printing , 2019, Ceramics International.
[12] F. Azarmi,et al. Microstructural evolution during fabrication of alumina via laser stereolithography technique , 2019, Ceramics International.
[13] Bram de Jager,et al. A feasibility study on process monitoring and control in vat photopolymerization of ceramics , 2018, Mechatronics.
[14] H. Chuanzhen,et al. Preparation and characterization of UV curable Al2O3 suspensions applying for stereolithography 3D printing ceramic microcomponent , 2018, Powder Technology.
[15] Haidong Wu,et al. Fabrication of Complex-shaped Zirconia Ceramic Parts via a DLP- Stereolithography-based 3D printing method , 2018 .
[16] M. Park,et al. A Study on the Rheological and Mechanical Properties of Photo-Curable Ceramic/Polymer Composites with Different Silane Coupling Agents for SLA 3D Printing Technology , 2018, Nanomaterials.
[17] Brett Paull,et al. Recent developments in 3D printable composite materials , 2016 .
[18] Hai‐Tao Liu,et al. Study on Nanosilica Reinforced Stereolithography Resin , 2010 .
[19] C. E. Corcione,et al. Laser stereolithography of ZrO2 toughened Al2O3 , 2004 .
[20] Thierry Chartier,et al. Stereolithography of structural complex ceramic parts , 2002 .
[21] John W. Halloran,et al. SCATTERING OF ULTRAVIOLET RADIATION IN TURBID SUSPENSIONS , 1997 .
[22] G. Wang,et al. High solid loading, low viscosity photosensitive Al2O3 slurry for stereolithography based additive manufacturing , 2019, Ceramics International.
[23] S. Scheppokat,et al. Tailor-made ceramic-based components : Advantages by reactive processing and advanced shaping techniques , 2008 .