Recent developments in micromilling using focused ion beam technology

The application of focused ion beam (FIB) technology in microfabrication has become increasingly popular. Its use in microfabrication has advantages over contemporary photolithography or other micromachining technologies, such as small feature resolution, the ability to process without masks and being accommodating for a variety of materials and geometries. An overview of the recent development in FIB microfabrication technology is given. The emphasis will be on direct milling, or maskless techniques, and this can distinguish the FIB technology from the contemporary photolithography process and provide a vital alternative to it. After an introduction to the technology and its FIB principles, the recent developments in using milling techniques for making various high-quality devices and high-precision components at the micrometer scale are examined and discussed. Finally, conclusions are presented to summarize the reviewed work and to suggest the areas for improving the FIB milling technology and for future research.

[1]  J. Biersack,et al.  A Monte Carlo computer program for the transport of energetic ions in amorphous targets , 1980 .

[2]  Andrew J. Steckl,et al.  Focused ion beam micromilling of GaN and related substrate materials (sapphire, SiC, and Si) , 1999 .

[3]  Li Wang.  Design optimization for two lens focused ion beam columns , 1997 .

[4]  B. Khamsehpour,et al.  Focused ion beam machining and deposition for nanofabrication , 1996 .

[5]  I. Brodie,et al.  Particle Beams: Sources, Optics, and Interactions , 1982 .

[6]  R. J. Young,et al.  Characteristics of gas‐assisted focused ion beam etching , 1993 .

[7]  Gang Xiong,et al.  Magnetic nanoelements for magnetoelectronics made by focused-ion-beam milling , 2001 .

[8]  A. Tseng,et al.  Advanced Deposition Techniques for Freeform Fabrication of Metal and Ceramic Parts , 2000, Manufacturing Engineering.

[9]  Michael J. Vasile,et al.  Focused ion beam-shaped microtools for ultra-precision machining of cylindrical components , 2003 .

[10]  D. Adams,et al.  Microgrooving and microthreading tools for fabricating curvilinear features , 2000 .

[11]  Robert Puers,et al.  A review of focused ion beam applications in microsystem technology , 2001 .

[12]  S. V. Krishnaswamy,et al.  Characterization of black Ge selective absorbers , 1980 .

[13]  T. Nishikawa,et al.  Low‐damage specimen preparation technique for transmission electron microscopy using iodine gas‐assisted focused ion beam milling , 1995 .

[14]  Michael D. Stewart,et al.  Patterning curved surfaces: Template generation by ion beam proximity lithography and relief transfer by step and flash imprint lithography , 1999 .

[15]  P. Jager,et al.  Beam interactions in a focused ion beam system with a liquid metal ion source , 1994 .

[16]  Yongqi Fu,et al.  Experimental study of microcylindrical lenses fabricated using focused-ion-beam technology , 2001 .

[17]  Y. Yamamura,et al.  Angular dependence of sputtering yields of monatomic solids , 1983 .

[18]  R. Nassar,et al.  Depth control of focused ion-beam milling from a numerical model of the sputter process , 1999 .

[19]  Fuhrmann,et al.  Finite element calculations and fabrication of cantilever sensors for nanoscale detection , 2000, Ultramicroscopy.

[20]  Ngoi Kok Ann Bryan,et al.  Data Format Transferring for FIB Microfabrication , 2000 .

[21]  N. P. Hung,et al.  Influence of the Redeposition effect for Focused Ion Beam 3D Micromachining in Silicon , 2000 .

[22]  A. Steckl,et al.  Damage generation and removal in the Ga+ focused ion beam micromachining of GaN for photonic applications , 1999 .

[23]  Mark G. Blamire,et al.  Real time resistometric depth monitoring in the focused ion beam , 2000 .

[24]  Kuan Chen,et al.  Electron beam lithography in nanoscale fabrication: recent development , 2003 .

[25]  J. Melngailis,et al.  Scaling of ferroelectric properties in thin films , 1999 .

[26]  T. Ohnishi,et al.  Focused‐ion‐beam ‘‘cutter’’ and ‘‘attacher’’ for micromachining and device transplantation , 1991 .

[27]  Jon Orloff,et al.  High‐resolution focused ion beams , 1993 .

[28]  H. Yamaguchi,et al.  Characteristics of silicon removal by fine focused gallium ion beam , 1985 .

[29]  S. P. Watkins,et al.  Design and performance of InP/GaAsSb/InP double heterojunction bipolar transistors , 2000 .

[30]  J. Giérak,et al.  New characterization method of ion current‐density profile based on damage distribution of Ga+ focused‐ion beam implantation in GaAs , 1993 .

[31]  M. Takai,et al.  Application of Medium Energy Nuclear Microprobe to Semiconductor Process Steps , 1996 .

[32]  Milling of submicron channels on gold layer using double charged arsenic ion beam , 2004 .

[33]  G. Shedd,et al.  Characterization of focused ion beam micromachined features , 1989 .

[34]  J. E. Barth,et al.  Influence of Coulomb interactions on current density distribution in a two-lens focused ion beam system , 1998 .

[35]  Klaus Edinger,et al.  Modeling of focused ion beam induced surface chemistry , 2000 .

[36]  Sergei G. Romanov,et al.  Micromoulding of three-dimensional photonic crystals on silicon substrates , 2003 .

[37]  E. D. Wolf,et al.  Ion beam exposure profiles in PMMA–computer simulation , 1981 .

[38]  J. Teichert,et al.  Focused ion beam sputtering investigations on SiC , 2001 .

[39]  Ngoi Kok Ann Bryan,et al.  Investigation of 3D microfabrication characteristics by focused ion beam technology in silicon , 2000 .

[40]  Mark G. Blamire,et al.  Focused ion beam fabrication of silicon print masters , 2003 .

[41]  Yongqi Fu,et al.  Influence analysis of dwell time on focused ion beam micromachining in silicon , 2000 .

[42]  Klaus Edinger,et al.  Focused ion beam sputter yield change as a function of scan speed , 1997 .

[43]  E. Bertagnolli,et al.  FIB processing of silicon in the nanoscale regime , 2003 .

[44]  M. Madou.  Fundamentals of microfabrication , 1997 .

[45]  L. Harriott.  Beam‐size measurements in focused ion beam systems , 1990 .

[46]  H. Yamada.  Correlation between density and oxidation temperature for pyrolytic-gas passivated ultrathin silicon oxide films , 2004 .

[47]  H. Ryssel,et al.  Limitations of focused ion beam nanomachining , 2001 .

[48]  A. Stanishevsky.  Focused ion beam patterning of diamondlike carbon films , 1999 .

[49]  L. Harriott.  The technology of finely focused ion beams , 1991 .

[50]  H. Yamaguchi,et al.  End-point detection using focused ion beam-excited photoemissions in milling deep small holes in large scale integrated circuit structures , 1998 .

[51]  J. Melngailis,et al.  Focused ion beam fabrication of submicron gold structures , 1989 .

[52]  J. Melngailis.  Focused ion beam technology and applications , 1987 .

[53]  Alfred A. Mondelli,et al.  A review of ion projection lithography , 1998 .

[54]  B. Ngoi,et al.  Investigation of direct milling of micro-optical elements with continuous relief on a substrate by focused ion beam technology , 2000 .

[55]  Pierre Blondy,et al.  Micromachined filters for 38 and 77 GHz supported on thin membranes , 2001 .

[56]  J. Melngailis,et al.  Focused ion beam induced deposition and ion milling as a function of angle of ion incidence , 1992 .

[57]  W. Graham,et al.  CRYOPUMP MEASUREMENTS RELATING TO SAFETY, PUMPING SPEED, AND RADIATION OUTGASSING , 1979 .

[58]  R. Lamendola,et al.  Dry etching of titanium nitride thin films in CF4–O2 plasmas , 1995 .

[59]  H. Ryssel,et al.  Nanoscale effects in focused ion beam processing , 2003 .

[60]  Yung-Cheng Lee,et al.  NSF 2000 Workshop on Manufacturing of Micro-Electro-Mechanical Systems , 2000 .

[61]  Rainer Kaesmaier,et al.  Ion Projection Lithography: Progress of European MEDEA & International Program , 2000 .

[62]  J. Melngailis.  Applications of Ion Microbeams Lithography and Direct Processing , 2001 .

[63]  C. Mailhiot,et al.  Modulation of internal piezoelectric fields in strained-layer superlattices grown along the (111) orientation , 1989 .

[64]  O. Almén,et al.  Collection and Sputtering Experiments with Noble Gas Ions , 1961 .