Electrochemical investigation of the corrosion behavior of chromium-modified carbon steels in water

Abstract Electrochemical measurements were performed on four steels with different chromium (Cr) contents in simulated CANDU reactor coolant at room temperature to investigate the influence of chromium content on the corrosion behavior of the steels. The addition of chromium to carbon steel can promote passivation. The passive film significantly decreases the corrosion rate, and thus improves the corrosion resistance of the steels as chromium content is increased. Repassivation kinetic experiments indicate that there is a more rapid repassivation rate and a more stable passive film on steels containing a higher concentration of chromium. The slip-oxidation model was used to calculate the crack growth rate (CGR) on the steels. The 304L stainless steel has the highest CGR with an increase in potential of the steels studied. Chromium modification of steels can improve the resistance to corrosion. However, its influence on cracking and crack growth must be taken into consideration. The 2.5%Cr–1%Mo steel gave the best overall results when considering both the corrosion and the cracking behavior of the steels studied.

[1]  Peter L. Andresen,et al.  Repassivation and Crack Propagation of Alloy 600 in 288°C Water , 1997 .

[2]  H. Uhlig,et al.  Corrosion and corrosion control , 1971 .

[3]  Y. Kim,et al.  Electrochemical Corrosion Potential Models for Boiling-Water Reactor Applications , 1996 .

[4]  M. Mayuzumi,et al.  Intergranular Cracking of Irradiated Thermally Sensitized Type 304 Stainless Steel in High-Temperature Water and Inert Gas , 1995 .

[5]  B. Stellwag.  The mechanism of oxide film formation on austenitic stainless steels in high temperature water , 1998 .

[6]  J. Congleton,et al.  The effect of applied potential on the stress corrosion cracking of sensitized type 316 stainless steel in high temperature water , 1995 .

[7]  C. Birchenall,et al.  Oxidation of Iron-Chromium Alloys at 750–1025C , 1961 .

[8]  J. Robertson.  The mechanism of high temperature aqueous corrosion of steel , 1989 .

[9]  Jing-Li Luo,et al.  Passivity and pitting of carbon steel in chromate solutions , 1999 .

[10]  H. Hirano,et al.  Inhibitory Effect of Zinc Addition to High-Temperature Hydrogenated Water on Mill-Annealed and Prefilmed Alloy 600 , 2000 .

[11]  F. P. Ford.  Quantitative Prediction of Environmentally Assisted Cracking , 1996 .

[12]  Y. J. Kim,et al.  Corrosion potential behavior of noble metal-modified alloys in high-temperature water , 1996 .

[13]  P. Andresen,et al.  Effect of Zinc Additions on Oxide Rupture Strain and Repassivation Kinetics of Iron-Based Alloys in 288°C Water , 1996 .