Influence of pre-machining on post-machining deformation of thin-walled elements made of aluminium alloy EN AW-2024

[1]  M. Zawada-Michałowska,et al.  Influence of machining strategies and technological history of semi-finished product on the deformation of thin-wall elements after milling , 2017 .

[2]  Yan Li,et al.  A theoretical model for load prediction in rolling correction process of thin-walled aeronautic parts , 2017 .

[3]  Tarek Mabrouki,et al.  Numerical and experimental investigations of post-machining distortions in thin machined structures considering material-induced residual stress , 2017 .

[4]  Svetan Ratchev,et al.  Error compensation strategy in milling flexible thin-wall parts , 2005 .

[5]  Anupam Agrawal,et al.  Investigation of surface residual stress distribution in deformation machining process for aluminum alloy , 2015 .

[6]  W. Adamski,et al.  Manufacturing development strategies in aviation industry , 2010 .

[8]  Xiaomin Deng,et al.  Residual stresses and strains in orthogonal metal cutting , 2003 .

[9]  J. Kuczmaszewski,et al.  STUDY OF CHIP IGNITION AND CHIP MORPHOLOGY AFTER MILLING OF MAGNESIUM ALLOYS , 2016 .

[10]  Yidu Zhang,et al.  An analytical model for predicting the machining deformation of a plate blank considers biaxial initial residual stresses , 2017 .

[11]  Soichi Ibaraki,et al.  A cutting sequence optimization algorithm to reduce the workpiece deformation in thin-wall machining , 2017 .

[12]  Arshpreet Singh,et al.  Comparison of deforming forces, residual stresses and geometrical accuracy of deformation machining with conventional bending and forming , 2016 .

[13]  Haolin Li,et al.  An approach to predict the distortion of thin-walled parts affected by residual stress during the milling process , 2017 .

[14]  M. Zawada-Michałowska,et al.  Influence of Milling Strategies of Thin-walled Elements on Effectiveness of their Manufacturing , 2017 .

[15]  Emmanuel Duc,et al.  Methodology for aluminium part machining quality improvement considering mechanical properties and process conditions , 2017 .

[16]  P. Theocaris.  The method of isostatics applied to rectangular bars with uniform loading , 1964 .

[17]  Kuo Liu,et al.  New deformation prediction of micro thin-walled structures by iterative FEM , 2018 .