Lattice Discrete Particle Model for Fiber-Reinforced Concrete. II: Tensile Fracture and Multiaxial Loading Behavior

In Part I of this two-part study, a theory is provided for the extension of the lattice discrete particle model (LDPM) to include fiber reinforcing capability. The resulting model, LDPM-F, is calibrated and validated in the present paper by comparing numerical simulations with experimental data gathered from the literature. The analyzed experiments include direct tension, confined and unconfined compression, and notched three-point bending tests.

[1]  Antoine E. Naaman,et al.  Fiber Pullout and Bond Slip. II: Experimental Validation , 1991 .

[2]  Faming Li.  Fracture characterization of fiber reinforced concrete in direct uniaxial tension , 1998 .

[3]  Antoine E. Naaman,et al.  Pull-Out Mechanism in Steel Fiber-Reinforced Concrete , 1976 .

[4]  R. N. Swamy,et al.  Stress-Strain Behavior of Steel Fiber-Reinforced Concrete in Compression , 2008 .

[5]  Will Hansen,et al.  Pullout behavior of steel fibers from cement-based composites , 1997 .

[6]  Victor C. Li,et al.  Modelling of fibre pull-out from a cement matrix , 1988 .

[7]  V. Li,et al.  Effect of inclination angle on fiber rupture load in fiber reinforced cementitious composites , 2002 .

[8]  T. H. Wee,et al.  STRESS-STRAIN RELATIONSHIP OF HIGH-STRENGTH FIBER CONCRETE IN COMPRESSION , 1999 .

[9]  G. Cusatis,et al.  Lattice Discrete Particle Model (LDPM) for failure behavior of concrete. I: Theory , 2011 .

[10]  Jenn-Chuan Chern,et al.  Behavior of Steel Fiber Reinforced Concrete in Multiaxial Loading , 1993 .

[11]  V. Li,et al.  Inclination Angle Effect of Carbon Fibers in Cementitious Composites , 1995 .

[12]  En-Hua Yang,et al.  Fiber-Bridging Constitutive Law of Engineered Cementitious Composites , 2008 .

[13]  Thomas T. C. Hsu,et al.  Biaxial Tests of Plain and Fiber Concrete , 1989 .

[14]  Gianluca Cusatis,et al.  Lattice Discrete Particle Model for Fiber-Reinforced Concrete. I: Theory , 2012 .

[15]  A. Samer Ezeldin,et al.  Normal‐ and High‐Strength Fiber‐Reinforced Concrete under Compression , 1992 .

[16]  Y. Mai,et al.  UNIAXIAL TENSILE BEHAVIOR OF CONCRETE REINFORCED WITH RANDOMLY DISTRIBUTED SHORT FIBERS , 1998 .

[17]  G. Cusatis,et al.  Lattice Discrete Particle Model (LDPM) for failure behavior of concrete. II: Calibration and validation , 2011 .

[18]  Tadashi Saito,et al.  Measuring and modifying interface properties of PVA fibers in ECC matrix , 2001 .

[19]  Z. Bažant,et al.  Crack band theory for fracture of concrete , 1983 .

[20]  Effect of lateral stresses on fiber debonding/pull-out , 1995 .

[21]  Nathan Shapiro,et al.  Optimal steel fiber strength for reinforcement of cementitious materials , 1999 .

[22]  Nemkumar Banthia,et al.  Concrete Reinforced with Deformed Steel Fibers, Part I: Bond-Slip Mechanisms , 1994 .

[23]  Antoine E. Naaman,et al.  Bond-Slip Mechanisms of Steel Fibers in Concrete , 1991 .

[24]  V. Li,et al.  On Interface Property Characterization and Performance of Fiber Reinforced Cementitious Composites , 1999 .

[25]  S. L. Lee,et al.  Analytical Model for Tensile Behavior of Steel-Fiber Concrete , 1987 .

[26]  M. C. Nataraja,et al.  STRESS-STRAIN CURVES FOR STEEL-FIBER REINFORCED CONCRETE UNDER COMPRESSION , 1999 .

[27]  Christopher K.Y. Leung,et al.  Micromechanical modeling of softening behavior in steel fiber reinforced cementitious composites , 1998 .

[28]  Victor C. Li,et al.  Interface Property and Apparent Strength of High-Strength Hydrophilic Fiber in Cement Matrix , 1998 .

[29]  Victor C. Li,et al.  Effect of inclining angle, bundling and surface treatment on synthetic fibre pull-out from a cement matrix , 1990 .