Super-harmonic resonance of gear transmission system under stick-slip vibration in high-speed train

This work deals with super-harmonic responses and the stabilities of a gear transmission system of a high-speed train under the stick-slip oscillation of the wheel-set. The dynamic model of the system is developed with consideration on the factors including the time-varying system stiffness, the transmission error, the tooth backlash and the self-excited excitation of the wheel-set. The frequency-response equation of the system at super-harmonic resonance is obtained by the multiple scales method, and the stabilities of the system are analyzed using the perturbation theory. Complex nonlinear behaviors of the system including multi-valued solutions, jump phenomenon, hardening stiffness are found. The effects of the equivalent damping and the loads of the system under the stick-slip oscillation are analyzed. It shows that the change of the load can obviously influence the resonance frequency of the system and have little effect on the steady-state response amplitude of the system. The damping of the system has a negative effect, opposite to the load. The synthetic damping of the system composed of meshing damping and equivalent damping may be less than zero when the wheel-set has a large slippage, and the system loses its stability owing to the Hopf bifurcation. Analytical results are validated by numerical simulations.

[1]  Xuesong Jin,et al.  Wheel/rail adhesion and analysis by using full scale roller rig , 2002 .

[2]  A. Kahraman Effect of Axial Vibrations on the Dynamics of a Helical Gear Pair , 2021 .

[3]  A. Kahraman,et al.  Steady state forced response of a mechanical oscillator with combined parametric excitation and clearance type non-linearity , 1995 .

[4]  Yuan Yao,et al.  An analysis of resonance effects in locomotive drive systems experiencing wheel/rail saturation adhesion , 2014 .

[5]  Marco Amabili,et al.  DYNAMIC ANALYSIS OF SPUR GEAR PAIRS: STEADY-STATE RESPONSE AND STABILITY OF THE SDOF MODEL WITH TIME-VARYING MESHING DAMPING , 1997 .

[6]  Oldrich Polach,et al.  A Fast Wheel-Rail Forces Calculation Computer Code , 2021, The Dynamics of Vehicles on Roads and on Tracks.

[7]  Heyun Bao,et al.  Stability of motion state and bifurcation properties of planetary gear train , 2012 .

[8]  Rajendra Singh,et al.  Interactions between time-varying mesh stiffness and clearance non-linearities in a geared system , 1991 .

[9]  A. Seireg,et al.  Factors Influencing Instability and Resonances in Geared Systems , 1981 .

[10]  H. S. Bauomy,et al.  Dynamics of an AMB-rotor with time varying stiffness and mixed excitations , 2012 .

[11]  Oldrich Polach,et al.  INFLUENCE OF LOCOMOTIVE TRACTIVE EFFORT ON THE FORCES BETWEEN WHEEL AND RAIL , 2001 .

[12]  Rajendra Singh,et al.  A new gear mesh interface dynamic model to predict multi-dimensional force coupling and excitation , 1995 .

[13]  Kiyohiko Umezawa,et al.  Simulation of Rotational Vibration of Spur Gears , 1984 .

[14]  Rajendra Singh,et al.  Dynamic force transmissibility in helical gear pairs , 1995 .

[15]  Zhang Hong-jun,et al.  The dynamic study of locomotives under saturated adhesion , 2011 .

[16]  Ian Howard,et al.  Finite Element Analysis of High Contact Ratio Spur Gears in Mesh , 2005 .

[17]  Weihua Zhang,et al.  Study on dynamics of coupled systems in high-speed trains , 2013 .