Laser heating and detection of bilayer microcantilevers for non-contact thermodynamic measurements

We describe a method for optical detection (frequency and position) and heating of bilayer microcantilevers (BMCs) to high temperatures at fast heating rates (106 °C/s to 109 °C/s) for non-contact thermodynamic measurements of small quantities of materials in the femtogram range. The current experimental apparatus with a 2 μm × 10 μm BMC achieves a deflection sensitivity of 0.1 A, heating rate of 3.0 × 106 °C/s, and heat sensitivity of 18 pJ in a 3 kHz bandwidth in air. By measuring the resonant frequency shift after sample loading, we achieve a mass resolution of 2.67 fg.

[1]  R. F. Harrison,et al.  Impulse coupling to targets in vacuum by KrF, HF, and CO2 single‐pulse lasers , 1988 .

[2]  Takahito Ono,et al.  Evaluation of bimaterial cantilever beam for heat sensing at atmospheric pressure. , 2010, The Review of scientific instruments.

[3]  D. Laván,et al.  Characterization of a 10-MHz quadrant APD for measuring frequency oscillations and tip displacements of microcantilevers , 2012 .

[4]  James K. Gimzewski,et al.  Thermal analysis using a micromechanical calorimeter , 1996 .

[5]  C. R. Phipps,et al.  Diode Laser-Driven Microthrusters: A New Departure for Micropropulsion , 2002 .

[6]  S. Timoshenko,et al.  Analysis of Bi-Metal Thermostats , 1925 .

[7]  D. Laván,et al.  Nanoscale Specific Heat Capacity Measurements Using Optoelectronic Bilayer Microcantilevers , 2012 .

[8]  A. Warren,et al.  Oxidation of tungsten and tungsten carbide in dry and humid atmospheres , 1996 .

[9]  Songlin Xu,et al.  Study of tungsten oxidation in O2∕H2∕N2 downstream plasma , 2008 .

[10]  James K. Gimzewski,et al.  Observation of a chemical reaction using a micromechanical sensor , 1994 .

[11]  James K. Gimzewski,et al.  Micromechanics: a toolbox for femtoscale science: “Towards a laboratory on a tip” , 1997 .

[12]  Roger Kelly,et al.  Critical assessment of thermal models for laser sputtering at high fluences , 1995 .

[13]  James K. Gimzewski,et al.  A femtojoule calorimeter using micromechanical sensors , 1994 .

[14]  R. Proksch,et al.  Noninvasive determination of optical lever sensitivity in atomic force microscopy , 2006 .