High-Lift Low Reynolds Number Airfoil Design

A new high-lift airfoil design philosophy has been developed and experimentally validated through wind-tunnel tests. A key element of the high-lift design philosophy was to make use of a concave pressure recovery with aft loading. Three codes for airfoil design and analysis (PROFOIL, the Eppler code, and ISES) were used to design the example S1223 high-lift airfoil for a Reynolds number of 2 3 10 5 . In windtunnel tests, the new airfoil yielded a maximum lift coefe cient of 2.2. With vortex generators and a 1% chord Gurney eap (used separately), the Cl,max increased to 2.3. The airfoil demonstrates the rather dramatic gains in Cl,max over those airfoils previously used for high-lift low Reynolds number applications.

[1]  William H. Rae,et al.  Low-Speed Wind Tunnel Testing , 1966 .

[2]  A. I. Ormsbee,et al.  Optimization of airfoils for maximum lift , 1969 .

[3]  F. Wortmann,et al.  The quest for high-lift , 1974 .

[4]  S. Miley,et al.  On the design of airfoils for low Reynolds numbers , 1974 .

[5]  R. Liebeck.  Design of Subsonic Airfoils for High Lift , 1976 .

[6]  Dan M. Somers,et al.  A computer program for the design and analysis of low-speed airfoils, supplement , 1980 .

[7]  Thomas J. Mueller,et al.  Low Reynolds Number Vehicles , 1985 .

[8]  M. Giles,et al.  Viscous-inviscid analysis of transonic and low Reynolds number airfoils , 1986 .

[9]  R. J. Mcghee,et al.  Experimental results for the Eppler 387 airfoil at low Reynolds numbers in the Langley low-turbulence pressure tunnel , 1988 .

[10]  Richard J. Foch,et al.  Flight Testing Navy Low Reynolds Number (LRN) Unmanned Aircraft , 1989 .

[11]  Mark D. Maughmer,et al.  Design and experimental results for a high-altitude, long-endurance airfoil , 1989 .

[12]  Hugh W. Coleman,et al.  Experimentation and Uncertainty Analysis for Engineers , 1989 .

[13]  Richard Eppler,et al.  Airfoil design and data , 1990 .

[14]  M. Maughmer,et al.  Multipoint inverse airfoil design method based on conformal mapping , 1991 .

[15]  M. Maughmer,et al.  Generalized multipoint inverse arifoil design , 1992 .

[16]  Richard J. Foch,et al.  Low Reynolds number, long endurance aircraft design , 1992 .

[17]  Dan M. Somers,et al.  Subsonic Natural-Laminar-Flow Airfoils , 1992 .

[18]  R. W. Barnwell,et al.  Natural laminar flow and laminar flow control , 1992 .

[19]  Michael S. Selig.  Multi-point inverse design of an infinite cascade of airfoils , 1992 .

[20]  Christopher Bovais,et al.  Flight testing the Flying Radar Target (FLYRT) , 1994 .

[21]  Michael S. Selig,et al.  Spanwise variations in profile drag for airfoils at low Reynolds numbers , 1995 .

[22]  M. Selig.  Summary of low speed airfoil data , 1995 .

[23]  Gregory M. Gatlin,et al.  Freestream velocity measurements and corrections for two-dimensional testing with splitter plates , 1996 .

[24]  Michael S. Selig,et al.  Freestream Velocity Corrections for Two-Dimensional Testing with Splitter Plates , 1997 .

[25]  Ashok Gopalarathnam,et al.  Multipoint Inverse Method for Multielement Airfoil Design , 1998 .