A Rolling Contact Fatigue Reliability Evaluation Method and its Application to a Slewing Bearing

[1]  L. Houpert,et al.  Bearing Life Calculation in Oscillatory Applications , 1999 .

[2]  Alain Daidié,et al.  3D Simplified Finite Elements Analysis of Load and Contact Angle in a Slewing Ball Bearing , 2008 .

[3]  Rongjing Hong,et al.  Effect of raceway geometry parameters on the carrying capability and the service life of a four-point-contact slewing bearing , 2010 .

[4]  Jari Halme,et al.  Rolling contact fatigue and wear fundamentals for rolling bearing diagnostics - state of the art , 2010 .

[5]  C. Richard Liu,et al.  A new methodology for predicting crack initiation life for rolling contact fatigue based on dislocation and crack propagation , 2008 .

[6]  Matjaž Šraml,et al.  Fatigue crack initiation and propagation under cyclic contact loading , 2009 .

[7]  Trevor S. Slack,et al.  A Review of Rolling Contact Fatigue , 2009 .

[8]  E. V. Zaretsky,et al.  Rolling Bearing Life Prediction-Past, Present, and Future , 2000 .

[9]  T. A. Harris,et al.  A New Fatigue Life Model for Rolling Bearings , 1985 .

[10]  Jorge Damian,et al.  Load distribution in a four contact-point slewing bearing , 2003 .

[11]  John H. Rumbarger.  Simplification of Dynamic Capacity and Fatigue Life Estimations for Oscillating Rolling Bearings , 2003 .

[12]  Bradley K. Fritz,et al.  Evaluation of Spray Drift Using Low-Speed Wind Tunnel Measurements and Dispersion Modeling , 2010 .

[13]  T. A. Harris,et al.  Life ratings for ball and roller bearings , 2001 .

[14]  S. Zupan,et al.  Carrying angle and carrying capacity of a large single row ball bearing as a function of geometry parameters of the rolling contact and the supporting structure stiffness , 2001 .

[15]  Erwin V. Zaretsky,et al.  A. Palmgren Revisited-A Basis for Bearing Life Prediction , 1997 .

[16]  R. Gnanamoorthy,et al.  Rolling/sliding contact fatigue life prediction of sintered and hardened steels , 2007 .

[17]  X H Gao,et al.  Modelling of ballraceway contacts in a slewing bearing with non-linear springs , 2011 .

[18]  Damian Derlukiewicz,et al.  Evaluation of load distribution in the superstructure rotation joint of single-bucket caterpillar excavators ☆ , 2008 .

[19]  P. Moreira,et al.  A study on the effects of dented surfaces on rolling contact fatigue , 2008 .

[20]  Nelson H. Forster,et al.  Stress Field Evolution in a Ball Bearing Raceway Fatigue Spall , 2009 .

[21]  Eugeniusz Rusiński,et al.  Superelement-based modeling of load distribution in large-size slewing bearings , 2007 .

[22]  F. Sadeghi,et al.  A Statistical Damage Mechanics Model for Subsurface Initiated Spalling in Rolling Contacts , 2008 .

[23]  T. Tallián,et al.  Weibull Distribution of Rolling Contact Fatigue Life and Deviations Therefrom , 1962 .

[24]  Sean B. Leen,et al.  Finite element, critical-plane, fatigue life prediction of simple and complex contact configurations , 2005 .

[25]  Benjamin D. Leonard,et al.  Effects of fretting wear on rolling contact fatigue life of M50 bearing steel , 2008 .

[26]  Nelson H. Forster,et al.  Rolling Contact Fatigue Life and Spall Propagation of AISI M50, M50NiL, and AISI 52100, Part II: Stress Modeling , 2009 .

[27]  S. Glodež,et al.  Fatigue behaviour of 42CrMo4 steel under contact loading , 2010 .

[28]  Johan Sandström,et al.  Probability of subsurface fatigue initiation in rolling contact , 2011 .