Mapping individual tree location, height and species in broadleaved deciduous forest using airborne LIDAR and multi‐spectral remotely sensed data

Automated feature extraction based on prototypes is only partially successful when applied to remotely sensed imagery of natural scenes due to the complexity and unpredictability of the shape and geometry of natural features. Here, a new method is developed for extracting the locations of treetops by applying GIS (Geographical Information System) overlay techniques and morphological functions to high spatial resolution airborne imagery. This method is based on the geometrical and spatial properties of tree crowns. Airborne data of the study site in the New Forest, UK included colour aerial photographs, LIDAR (Light Detection And Ranging) and ATM (Airborne Thematic Mapper) imagery. A DEM (Digital Elevation Model) was generated from LIDAR data and then subtracted from the original LIDAR image to create a Canopy Height Model (CHM). A set of procedures using image contouring and the manipulation of the resulting polygons was implemented to extract treetops from the aerial photographs and the CHM. Criteria were developed and threshold values were set using a supervised approach for the acceptance or rejection of features based on field knowledge. Tree species were mapped by classifying the ATM data and these data were co‐registered with the treetop layer. For broadleaved deciduous plantations the success of treetop extraction using aerial photographs was 91%, but was much lower using LIDAR data. For semi‐natural forests, the LIDAR produced better results than the aerial photographs with a success of 80%, which was considered high, given the complexity of these uneven aged stands. The methodology presented here is easy to apply as it is implemented within a GIS and the final product is an accurate map with information about the location, height and species of each tree.

[1]  D. C. West,et al.  Size and pattern of simulated forest stands , 1979 .

[2]  C. G. Bachman.  Laser radar systems and techniques , 1979 .

[3]  A. Jelalian.  Laser radar systems , 1980 .

[4]  W. O. Rasmussen.  Quantitative techniques in geography — An introduction , 1980 .

[5]  C. P. Lo,et al.  Applied Remote Sensing , 1988 .

[6]  John T. Finn,et al.  A spatial model of land use and forest regeneration in the Ituri forest of northeastern zaire , 1988 .

[7]  D. H. Maling,et al.  Measurements from Maps: Principles and Methods of Cartometry , 1988 .

[8]  David W. Roberts,et al.  Analysis of forest succession with fuzzy graph theory , 1989 .

[9]  Ronald J. Hall,et al.  A comparison of existing models for DBH estimation from large-scale photos , 1989 .

[10]  Horst Bischof,et al.  Constructing a neural network for the interpretation of the species of trees in aerial photographs , 1990, [1990] Proceedings. 10th International Conference on Pattern Recognition.

[11]  R. Leemans,et al.  Pattern and process and the dynamics of forest structure: a simulation approach. , 1990 .

[12]  Zhilin Li,et al.  Effects of check points on the reliability of DTM accuracy estimates obtained from experimental tests , 1991 .

[13]  D. Engle,et al.  Growth dynamics of crowns of eastern red- cedar at 3 locations in Oklahoma , 1992 .

[14]  J. P. Grime,et al.  Resource dynamics and vegetation processes: a deterministic model using two-dimensional cellular automata , 1993 .

[15]  George Alan Blackburn,et al.  Measurement of the spectral directional reflectance of forest canopies: A review of methods and a practical application , 1994 .

[16]  D. Leckie,et al.  Forest inventory in Canada with emphasis on map production , 1995 .

[17]  F. Gougeon.  A Crown-Following Approach to the Automatic Delineation of Individual Tree Crowns in High Spatial Resolution Aerial Images , 1995 .

[18]  George Alan Blackburn,et al.  Filling the gaps: remote sensing meets woodland ecology , 1996 .

[19]  Robert J. Woodham,et al.  The automatic recognition of individual trees in aerial images of forests based on a synthetic tree crown image model , 1996 .

[20]  M. Rudemo,et al.  Stem number estimation by kernel smoothing of aerial photos , 1996 .

[21]  M. Weir,et al.  A Century of forest management mapping , 1997 .

[22]  Mats Rudemo,et al.  Automatic estimation of individual tree positions from aerial photos , 1997 .

[23]  H. Bartelink.  Allometric relationships for biomass and leaf area of beech (Fagus sylvatica L.). , 1997 .

[24]  George Alan Blackburn,et al.  An ecological survey of deciduous woodlands using airborne remote sensing and geographical information systems (GIS). , 1997 .

[25]  Isabelle Jobard,et al.  Validation of satellite and ground-based estimates of precipitation over the Sahel , 1998 .

[26]  E. J. Huising,et al.  Errors and accuracy estimates of laser data acquired by various laser scanning systems for topographic applications , 1998 .

[27]  Morten Larsen,et al.  Optimizing templates for finding trees in aerial photographs , 1998, Pattern Recognit. Lett..

[28]  Emmanuel P. Baltsavias,et al.  Airborne laser scanning: basic relations and formulas , 1999 .

[29]  Emmanuel P. Baltsavias,et al.  A comparison between photogrammetry and laser scanning , 1999 .

[30]  W. Cohen,et al.  Surface lidar remote sensing of basal area and biomass in deciduous forests of eastern Maryland, USA , 1999 .

[31]  Aloysius Wehr,et al.  Airborne laser scanning—an introduction and overview , 1999 .

[32]  I. Balla,et al.  A tree hollow dynamics simulation model , 1999 .

[33]  L. M Gomes Pereira,et al.  Suitability of laser data for DTM generation: a case study in the context of road planning and design , 1999 .

[34]  Emmanuel P. Baltsavias,et al.  Airborne laser scanning: existing systems and firms and other resources , 1999 .

[35]  Michael F. Goodchild,et al.  Monte Carlo simulation of long - term spatial error propagation in forestry databases , 1999 .

[36]  François A. Gougeon.  Individual Tree Identification from High Resolution MEIS Images , 1999 .

[37]  K. O. Niemann,et al.  Local Maximum Filtering for the Extraction of Tree Locations and Basal Area from High Spatial Resolution Imagery , 2000 .

[38]  Gregory S. Biging,et al.  Modeling conifer tree crown radius and estimating canopy cover , 2000 .

[39]  George Alan Blackburn,et al.  Introducing New Indices for Accuracy Evaluation of Classified Images Representing Semi-Natural Woodland Environments. , 2001 .

[40]  Mikko Inkinen,et al.  A segmentation-based method to retrieve stem volume estimates from 3-D tree height models produced by laser scanners , 2001, IEEE Trans. Geosci. Remote. Sens..

[41]  J. Pitkänen.  Individual tree detection in digital aerial images by combining locally adaptive binarization and local maxima methods , 2001 .

[42]  Darius S. Culvenor,et al.  TIDA: an algorithm for the delineation of tree crowns in high spatial resolution remotely sensed imagery , 2002 .

[43]  Åsa Persson,et al.  Detecting and measuring individual trees using an airborne laser scanner , 2002 .

[44]  R. Hill,et al.  Quantifying canopy height underestimation by laser pulse penetration in small-footprint airborne laser scanning data , 2003 .

[45]  George Vosselman,et al.  COMPARISON OF FILTERING ALGORITHMS , 2003 .

[46]  L. Orlóci.  Probing time series vegetation data for evidence of succession , 1981, Vegetatio.

[47]  Maria A. Brovelli,et al.  LIDAR Data Filtering and DTM Interpolation Within GRASS , 2004, Trans. GIS.

[48]  R. Busing,et al.  A spatial model of forest dynamics , 1991, Vegetatio.

[49]  George Alan Blackburn,et al.  Quantifying the spatial properties of forest canopy gaps using LiDAR imagery and GIS , 2004 .

[50]  W. Baker.  A review of models of landscape change , 1989, Landscape Ecology.

[51]  D. Leckie,et al.  Detection and assessment of trees with Phellinus weirii (laminated root rot) using high resolution multi-spectral imagery , 2004 .

[52]  J. Hyyppä,et al.  DETECTING AND ESTIMATING ATTRIBUTES FOR SINGLE TREES USING LASER SCANNER , 2006 .