Techniques for removal of contamination from EUVL mask without surface damage

Mask defectivity is an acknowledged road block for the introduction of EUV lithography (EUVL) for manufacturing. There are significant challenges to extend the conventional methods of cleaning developed for standard 193nm optical photomask to meet the specific requirements for EUV mask structure and materials. In this work, the use of UV activated media for EUV mask surface cleaning is evaluated and the effects on Ru capping layer integrity are compared against conventional cleaning methods. Ru layer surface is analyzed using roughness measurements (AFM) and reflectivity changes (EUV-R and optical).

[1]  Ted Liang,et al.  50nm particle removal from EUV mask blank using standard wet clean , 2009, Photomask Technology.

[2]  H. Levinson.  Extreme ultraviolet lithography’s path to manufacturing , 2009 .

[3]  Uwe Dietze,et al.  Preserving the mask integrity for the lithography process , 2010, Photomask Japan.

[4]  Patrick Naulleau,et al.  EUV mask pattern defect printability , 2006, Photomask Japan.

[5]  Jacek S. Miller,et al.  Oxidation of PAHs in water solution by ozone combined with ultraviolet radiation , 2001 .

[6]  Pei-Yang Yan,et al.  Characterization of ruthenium thin films as capping layer for extreme ultraviolet lithography mask blanks , 2007 .

[7]  Franklin D. Kalk,et al.  Photomask defectivity and cleaning : A new milieu , 2007 .

[8]  Anne-Marie Goethals,et al.  Investigation of EUV mask defectivity via full-field printing and inspection on wafer , 2009, Photomask Japan.

[9]  Abbas Rastegar,et al.  A method to determine the origin of remaining particles after mask blank cleaning , 2007, SPIE Photomask Technology.

[10]  Anne-Marie Goethals,et al.  Investigation of mask defectivity in full field EUV lithography , 2007, SPIE Photomask Technology.

[11]  Uwe Dietze,et al.  Automated imprint mask cleaning for step-and-flash imprint lithography , 2009, Advanced Lithography.

[12]  Ted Liang,et al.  Chemical durability studies of Ru-capped EUV mask blanks , 2008, Photomask Technology.

[13]  Uwe Dietze,et al.  Study on surface integrity in photomask resist strip and final cleaning processes , 2009, Photomask Japan.

[14]  André M. Braun,et al.  Photochemical processes for water treatment , 1993 .