An on-line arc welding quality monitor and process control system

This paper illustrates an on-line are welding quality monitor and process control system that combines two modified cerebellar model articulation controller (MCMAC) neural networks and a linear discriminant function (LDF) method to establish an on-line (1) prediction of the quality measurements, (2) quality classification measurement of the are welding process, and (3) corrective estimation of are welding process controllable variables system. The approach uses parallel multiple input state variables and a linear neighborhood sequential training (LNST) algorithm, which make MCMAC faster than conventional CMAC and back-propagation neural networks. It also produces a useful quality indicator for experts to predict weld quality, eliminate waste (rework and lost production time), and reduce production and maintenance cost. The comparison of conventional CMAC and MCMAC network shows the training efficiency of MCMAC, which based on CMAC parameter selection, training algorithm, training sample selection memory size, and convergence time. The proposed online quality monitor and process control system has been trained and tested with welding arc sound signals, which have shown satisfactory accuracy for welding quality classification and great potential for real-world process control applications.

[1]  David E. Hardt,et al.  A Model of Full Penetration Arc-Welding for Control System Design , 1985 .

[2]  James S. Albus,et al.  I A New Approach to Manipulator Control: The I Cerebellar Model Articulation Controller , 1975 .

[3]  W. T. Miller,et al.  Deconvolution and nonlinear inverse filtering using a neural network , 1989, International Conference on Acoustics, Speech, and Signal Processing,.

[4]  W. T. Miller,et al.  An overview of the CMAC neural network , 1991, [1991 Proceedings] IEEE Conference on Neural Networks for Ocean Engineering.

[5]  W. Thomas Miller,et al.  Real-time application of neural networks for sensor-based control of robots with vision , 1989, IEEE Trans. Syst. Man Cybern..

[6]  Hyungsuck Cho,et al.  Transient Temperature Distribution in Arc Welding of Finite Thickness Plates , 1990 .

[7]  Sunggyu Kwon,et al.  An Adaptive Control System for Biological and Robotic Simulations. , 1991 .

[8]  A. Sideris,et al.  Learning convergence in the cerebellar model articulation controller , 1992, IEEE Trans. Neural Networks.

[9]  L.G. Kraft,et al.  A comparison between CMAC neural network control and two traditional adaptive control systems , 1990, IEEE Control Systems Magazine.

[10]  W. T. Miller,et al.  Shape Recognition Using A CMAC Based Learning System , 1988, Other Conferences.

[11]  Michael Hormel,et al.  A Self-organizing Associative Memory System for Control Applications , 1989, NIPS.

[12]  Hyungsuck Cho.  A fuzzy linguistic control approach to the control of weld pool size in gas metal arc welding processes , 1991 .

[13]  David E. Hardt,et al.  A Real-Time Calibrated Thermal Model for Closed-Loop Weld Bead Geometry Control , 1985 .

[14]  W. T. Miller,et al.  Real time experiments in neural network based learning control during high speed nonrepetitive robotic operations , 1988, Proceedings IEEE International Symposium on Intelligent Control 1988.

[15]  T G Lim,et al.  Estimation of Weld Pool Sizes in GMA Welding Process Using Neural Networks , 1993 .

[16]  J Hanright,et al.  ROBOTIC ARC WELDING UNDER ADAPTIVE CONTROL - A SURVEY OF CURRENT TECHNOLOGY , 1986 .

[17]  G. Karsai,et al.  Artificial neural networks applied to arc welding process modeling and control , 1989, Conference Record of the IEEE Industry Applications Society Annual Meeting,.

[18]  John E. Moody,et al.  Fast Learning in Multi-Resolution Hierarchies , 1988, NIPS.

[19]  A. H. Kuhne,et al.  AN EXPERT SYSTEM FOR ROBOTIC ARC WELDING , 1987 .

[20]  James S. Albus,et al.  Data Storage in the Cerebellar Model Articulation Controller (CMAC) , 1975 .

[21]  Filson H. Glanz,et al.  Application of a General Learning Algorithm to the Control of Robotic Manipulators , 1987 .

[22]  Jacek M. Zurada,et al.  Introduction to artificial neural systems , 1992 .

[23]  J E Agapakis,et al.  Joint tracking and adaptive robotic welding using vision sensing of the weld joint geometry , 1986 .

[24]  W. T. Miller,et al.  CMAC: an associative neural network alternative to backpropagation , 1990, Proc. IEEE.

[25]  W. T. Miller,et al.  Rapid learning using CMAC neural networks: real time control of an unstable system , 1990, Proceedings. 5th IEEE International Symposium on Intelligent Control 1990.

[26]  Enis Ersü,et al.  A New Concept for Learning Control Inspired by Brain Theory , 1984 .

[27]  James S. Albus,et al.  New Approach to Manipulator Control: The Cerebellar Model Articulation Controller (CMAC)1 , 1975 .

[28]  W. Thomas Miller,et al.  Real-time dynamic control of an industrial manipulator using a neural network-based learning controller , 1990, IEEE Trans. Robotics Autom..

[29]  David E. Hardt,et al.  ULTRASONIC MEASUREMENT OF WELD PENETRATION , 1984 .

[30]  M. Tomizuka,et al.  Stability of fuzzy linguistic control systems , 1990, 29th IEEE Conference on Decision and Control.

[31]  W. Thomas Miller,et al.  Deconvolution using a CMAC neural network , 1988, Neural Networks.

[32]  Gabor Karsai,et al.  Neural Networks in GTA Weld Modeling and Control , 1989, 1989 American Control Conference.

[33]  Miriam Zacksenhouse,et al.  Weld Pool Impedance Identification for Size Measurement and Control , 1983 .