Optimized inchworm motion planning for a novel in-pipe robot

Modern society is fueled by very comprehensive grids of gas and liquid supply pipelines. The frequent inspection and maintenance of such pipeline grids is not a trivial task. It has been demonstrated that such task is best performed by using in-pipe robots. In this paper, a novel inchworm robot design and its optimized motion planning are presented. The proposed design uses a helical drive for both gripping and locomotion of the robot. The extension and retraction between inchworm segments are facilitated by conic springs as they can store strain energy. The proposed inchworm robot can also be made very compact without sacrificing stroke length as conic springs can be easily designed with telescopic feature. To generate inchworm motion, a sinusoidal velocity pattern is planned for each segment. The frequency of the velocity pattern is optimized using a genetic algorithm (GA). The optimization result from the GA method has been validated using a traditional gradient based method.

[1]  Jianzhong Shang,et al.  Development of Inchworm In-Pipe Robot Based on Self-Locking Mechanism , 2013, IEEE/ASME Transactions on Mechatronics.

[2]  Shugen Ma,et al.  Stiffness Design of Springs for a Screw Drive In-Pipe Robot to Pass through Curved Pipes and Vertical Straight Pipes , 2012, Adv. Robotics.

[3]  M. H. Wright.  The interior-point revolution in optimization: History, recent developments, and lasting consequences , 2004 .

[4]  M. Horodinca,et al.  1 A SIMPLE ARCHITECTURE FOR IN-PIPE INSPECTION ROBOTS , 2002 .

[5]  Taro Nakamura,et al.  An underground explorer robot based on peristaltic crawling of earthworms , 2009, Ind. Robot.

[6]  Shugen Ma,et al.  Mobility of an in-pipe robot with screw drive mechanism inside curved pipes , 2010, 2010 IEEE International Conference on Robotics and Biomimetics.

[7]  Byung-Ju Yi,et al.  One pneumatic line based inchworm-like micro robot for half-inch pipe inspection , 2008 .

[8]  Young-Woo Park,et al.  Development of the inpipe robot for various sizes , 2009, 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[9]  Fumitoshi Matsuno,et al.  Modeling and Control of a Snake-Like Robot Using the Screw-Drive Mechanism , 2012, IEEE Transactions on Robotics.

[10]  David Zarrouk,et al.  Analysis and Design of One Degree of Freedom Worm Robots for Locomotion on Rigid and Compliant Terrain , 2012 .

[11]  Shugen Ma,et al.  Experimental verification of analytical torques enabling a screw drive in-pipe robot to pass through bent pipes , 2011, 2011 IEEE International Conference on Robotics and Biomimetics.

[12]  M. Betemps,et al.  Design of an electro pneumatic micro robot for in-pipe inspection , 1999, ISIE '99. Proceedings of the IEEE International Symposium on Industrial Electronics (Cat. No.99TH8465).

[13]  H. T. Roman,et al.  Pipe crawling inspection robots: an overview , 1992 .

[14]  Kazumasa Kato,et al.  Application of In-Pipe Visual Inspection Robot to Piping Internal Surface Lining , 1988 .

[15]  Andrea Manuello Bertetto,et al.  In-pipe inch-worm pneumatic flexible robot , 2001, 2001 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Proceedings (Cat. No.01TH8556).

[16]  Jun Okamoto,et al.  Autonomous system for oil pipelines inspection , 1999 .

[17]  David Kerr,et al.  Design of a semi-autonomous modular robotic vehicle for gas pipeline inspection , 2003 .

[18]  Yan Gao,et al.  Locomotive gait generation for inchworm-like robots using finite state approach , 2001, Robotica.

[19]  Hyoukryeol Choi,et al.  Differential-drive in-pipe robot for moving inside urban gas pipelines , 2005, IEEE Transactions on Robotics.

[20]  Emmanuel Rodriguez,et al.  Optimal design of conical springs , 2008, Engineering with Computers.

[21]  Carsten Behn,et al.  WORM-LIKE LOCOMOTION SYSTEMS: DEVELOPMENT OF DRIVES AND SELECTIVE ANISOTROPIC FRICTION STRUCTURES , 2011 .

[22]  F. Pfeiffer,et al.  Control of a tube crawling machine , 2000, 2000 2nd International Conference. Control of Oscillations and Chaos. Proceedings (Cat. No.00TH8521).

[23]  Alireza Maheri,et al.  Design of a single-DOF kinematic chain using hybrid GA-pattern search and sequential GA , 2012 .